DEVICE
PURPOSE
Switc Box is an affordable and ig power smart relay (module w ic can switc on and off electric power) w ic allows you
to control almost every ouse old device like lamps, fans, kettles, radiators, etc.
It can be controlled directly from your smartp one, t roug your ome network or from anyw ere in t e World using t e
Internet. You can also control it locally using signal input e.g. to operate switc pus button or motion sensor.
D
ANGER
OF
ELECTROCUTION
!
All work on t e device may be performed only by a qualified and licensed electrician.
Even w en t e device is turned off, voltage may be present at its terminals. Any works introducing c anges into t e
configuration of connections or t e load must be always performed wit disconnected voltage (disable t e fuse).
Do not connect t e device to loads exceeding recommended
values.
Connect only in accordance wit t e diagram presented in t e
manual. Improper connections may be dangerous.
I
NSTALLATION
1. Remove enoug insulation from t e wires to connect
t em according to one of t e diagrams.
2. Ensure t at device is connected properly and antenna is far from metal objects, electrical wires, etc. w ic can
influence signal. Switc on t e power supply.