bleep DREAMWAY User manual

Step 1
Parts needed: DreamWay
interface, black hook & loop
lter strap, 2 white lters.
Step 2
Remove DreamWay vent swivel on
end of tube from the bottom of
the interface.
Step 3A
Apply the 2 pieces of white lter
material over the 2 cutout side
openings of the black hook
and loop lter strap. Be sure that the
“scratchy side” is facing up and on
the side you are applying the
white lter material on.
Step 3B
During the application of the completed
vent diuser strap, the soft side of the
hook and loop strap needs to be on the
outside of the DreamWay.
Step 3C
This is to make sure the soft side is
what comes in contact with the face,
as shown in the image to the left, trapping
the hook and loop side with the white
lter material against the actual plastic
vent openings on the bottom of the
DreamWay.
Step4A
Apply the hook and loop lter strap,
with both white diuser lters in place,
back onto the bottom of the vent
openings, where the tube was formerly
attached.
100607

Step 4B
Make sure the white lters
are in line with the vents
on each side of the bottom
of the DreamWay.
Step 5A
Snap the tube swivel/hose
onto the DreamWay with
the vent diuser strap and
lters in place.
Step 5B
The DreamWay is now ready
for use with your PAP device.
Step 6
The vent diuser strap does not need to
be removed to clean the DreamWay.
Recommended cleaning is to leave it in
place on the DreamWay and wash in
warm soapy water. Rinse and let air dry.
White lter inserts are available for
replacement each month as a separate
purchase, along with the black hook and
loop strap in both quarterly and annual
bundles.
Step 4C
Bring the ends of the black
straps to the top middle of
the silicone.
Step 4D
Now fasten together with
the hook and loop material
to hold it in place through
the center.
11312 US 15-501 North, Suite 107-206, Chapel Hill, NC 27517 • (833) EZ-BLEEP — [phone] •
bleepsleep.com ©2018 Bleep. All rights reserved. This product is protected by US and foreign patents.
For a list of patents related to this product please visit www.bleepsleep.com
100607