Blossom LED M6 2030 User manual

LED M6 2030 / LED M6 2436
LED M6 2030 / LED M6 2436

SCREW
(x2)
WALL PLUG
(x2)
WIRE CONNECTOR
(x2)
Electrical Drill 1/8” Drill Bit Pencil Phillips
Screwdriver Tape Measure Level
LED M6 2030 / LED M6 2436
LED M6 2030 / LED M6 2436

Live / Black
Field Wire
Ground / Green
Neutral / White
Neutral to white
Live to black
Ground to green.
• 5mm copper free silver mirror
• High output LED lighting:
CRI 90+, 2700-6400K CCT, IP44
• Color Temperature changing and
dimmable touch switch for surface LED
• Vertical and horizontal mount options
• Defogger
LED M6 2030 / LED M6 2436
LED M6 2030 / LED M6 2436

PLACEMENT
Select the desired position of the mirror.
Level and mark the location.
SUPPORT LOCATION
Measure the center of the holes and mark the
drilling locations ensure marking are leveled.
A
A
B
A
B
C
2 - 3mm
INSTALL SCREWS
screw and the wall.
A
B
PLACEMENT
Place the mirror against the wall and slide down as
shown in image B.
LED M6 2030 / LED M6 2436
A

[email protected]
www.BlossomUS.com
Touch to turn the task light and defogger on or off.
Press and hold to change the color temperature of task light.
Press and hold to dim or brighten the task light.
Please visit our website for more information.