Blu Stream C88CS User manual

C88CS QUICK REFERENCE GUIDE
Contact: [e-mail] |[e-mail] |[e-mail]
C88CS
Quick Reference Guide
01
Our Contractor 8x8 HDBaseT™ matrix oers unprecedented performance and
value for the custom installation market. The C88CS is a HDMI 2.0 4K 60Hz 4:4:4
HDCP 2.2 matrix utilising CSC technology to deliverHDMI, bi-directional IR and
PoC up to lengths of 70m over a single CAT cable. The matrix also provides
advanced features including simultaneous HDBaseT™ / HDMI on output 1, video
down conversion on HDBaseT™ outputs and a web browser interface module for
control and configuration of the matrix.
Introduction
FEATURES:
• Advanced HDBaseT™ technology oering distribution of video and audio over a single CAT cable
• Advanced Colour Space Conversion (CSC) supports HDMI 2.0 18Gbps specification including HDR*
• Features 8 x HDMI inputs which can be independently routed to 8 x HDBaseT™ outputs
• Output 1 features simultaneous HDMI and HDBaseT™ output
• Video down-conversion on HDBaseT™ outputs allowing a display only capable of supporting lower video
resolutions (4K 60Hz 4:2:0 or 1080p) to receive 4K 60Hz 4:4:4 video content while still showing maximum original 4K
UHD resolution on remaining video outputs
• Supports 4K 60Hz 4:4:4 UHD video up to 40m
• Extends HDMI 1080p video up to 70m
• Supports all industry standard video resolutions including VGA-WUXGA and 480i-4K
• Supports all known HDMI audio formats including Dolby TrueHD, Dolby Atmos, Dolby Digital Plus and DTS-HD
Master Audio transmission
• Web interface module for control and configuration of matrix
• Supports bi-directional IR on all HDBaseT™ outputs
• Control via front panel, IR, iOS / Android App, RS-232 and TCP/IP
• Supports PoC (Power over Cable) to power compatible HDBaseT™ receivers
• Supplied with Blustream IR receivers and emitters
• 3rd party drivers available for all major control brands
• 1U design for 19” rack mount integration- mounting kit included
• Advanced EDID management and HDCP 2.2 compliant
*CSC feature compatible with RX70CS only

C88CS QUICK REFERENCE GUIDE
www.blustream.com.au |www.blustream-us.com |www.blustream.co.uk02
Front Panel Description
1IR Receiver - Built in IR sensor for IR pass through
2Output LCD - Shows the currently selected output
3Output Up / Down Button - Press to adjust the selected output up or down
4Input Up / Down Button - Press to adjust the selected input up or down
5Input LCD - Shows the currently selected input
1IR Control Input - 3.5mm stereo connector to connect to Blustream IR receiver for IR control of the matrix
2TCP/IP - RJ45 connector for TCP/IP and Web GUI control of the matrix
3RS-232 - DB9 connector for RS-232 control of the matrix
4IR Receiver Output - 3.5mm mono connector to connect to Blustream IR emitter. Used for local Source control
5IR Receiver Input - 3.5mm stereo connector to connect to Blustream IR receiver or Control Processor. Used to extend
IR from Matrix to HDBaseT™ Outputs 1-8
6HDMI Inputs - Connect to source devices
7HDMI Output - Connect to display device
8HDBaseT™ Outputs - RJ45 HDBaseT ™ port to connect to the HDBaseT ™ input port of the compatible Blustream
HDBaseT ™ receiver
9IEC Power Socket - Use supplied IEC power cable
Rear Panel Description
1 3 4 52
6 7 8 9
1 2 3 4 5
Web GUI Control
The C88CS features an in-built Web GUI which can be used for control and configuration of the matrix. By default the
matrix is set to DHCP, however if a DHCP server (eg: network router) is not installed the matrix IP address will revert to
below details:
Default Username is: blustream Default Password is: 1234 Default IP Address is: 192.168.0.200
For further information please see the C88CS User Manual - available to download from the Blustream website.

C88CS QUICK REFERENCE GUIDE
Contact: [e-mail] |[e-mail] |[e-mail] 03
EDID Control
EDID (Extended Display Identification Data) is a data structure that is used between a display and a source. This data
is used by the source to find out what audio and video resolutions are supported by the display. By pre-determining
the video resolution and audio format of the source and display device you can reduce the time needed for EDID hand
shaking thus making switching quicker and more reliable.
Configuration of the EDID settings for each input can be achieved using the following RS-232 commands to specify the
required EDID:
EDIDxxDFzz
Where xx = Input: 00 refers to ALL inputs; 01-08 = specific input
zz = EDID as shown below
zz = 00: HDMI 1080p@60Hz, Audio 2ch PCM (Default)
01: HDMI 1080p@60Hz, Audio 5.1ch DTS/DOLBY
02: HDMI 1080p@60Hz, Audio 7.1ch DTS/DOLBY/HD
03: HDMI 1080i@60Hz, Audio 2ch PCM
04: HDMI 1080i@60Hz, Audio 5.1ch DTS/DOLBY
05: HDMI 1080i@60Hz, Audio 7.1ch DTS/DOLBY/HD
06: HDMI 1080p@60Hz/3D, Audio 2ch PCM
07: HDMI 1080p@60Hz/3D, Audio 5.1ch DTS/DOLBY
08: HDMI 1080p@60Hz/3D, Audio 7.1ch DTS/DOLBY/HD
09: HDMI 4K@30Hz 4:4:4, Audio 2ch PCM
10: HDMI 4K@30Hz 4:4:4, Audio 5.1ch DTS/DOLBY
11: HDMI 4K@30Hz 4:4:4, Audio 7.1ch DTS/DOLBY/HD
12: HDMI 4K@60Hz 4:2:0/4K@30Hz 4:4:4, Audio 2ch PCM
13: HDMI 4K@60Hz 4:2:0/4K@30Hz 4:4:4, Audio 5.1ch DTS/DOLBY
14: HDMI 4K@60Hz 4:2:0/4K@30Hz 4:4:4, Audio 7.1ch DTS/DOLBY/HD
15: HDMI 4K@60Hz 4:4:4, Audio 2ch PCM
16: HDMI 4K@60Hz 4:4:4, Audio 5.1ch DTS/DOLBY
17: HDMI 4K@60Hz 4:4:4, Audio 7.1ch DTS/DOLBY/HD
18: DVI 1280x1024@60Hz, Audio None
19: DVI 1920x1080@60Hz, Audio None
20: DVI 1920x1200@60Hz, Audio None
21: HDMI 1920x1200@60Hz, Audio 2ch PCM/6ch PCM
22: User EDID 1
23: User EDID 2
RS-232 Configuration
The RS-232 port is used for configuration and control of the product, as well as pass through of RS-232 commands to a
compatible Blustream HDBaseT™ receiver / matrix device.
The default RS-232 communication settings are:
Baud Rate: 57600
Data Bit: 8
Stop Bit: 1
Parity Bit: none
For a complete RS-232 command list please see the C88CS User Manual - available to download from the Blustream
website.

C88CS QUICK REFERENCE GUIDE
www.blustream.com.au |www.blustream-us.com |www.blustream.co.uk
04
REVA0_QRG_C88CS_201006
Package ContentsSpecifications
C88CS
• 1 x C88CS
• 1 x Rack Mounting Kit
• 1 x Remote Control
• 8 x IR Emitters
• 9 x IR Receivers
• 1 x Serial Cable - DB9 to DB9
• 1 x IR Control Cable - 3.5mm-3.5mm Cable
• 1 x Quick Reference Guide
• IEC Power Cable(s)
Maintenance
Clean this unit with a so, dry cloth. Never use alcohol, paint thinner or benzene to clean this unit.
NOTE: Specifications are subject to change without notice. Weights and dimensions are approximate.
C88CS
• Video Input Connectors: 8 x HDMI Type A, 19-pin, female
• Video Output Connectors: 1 x HDMI Type A, 19-pin, female, 8 x
HDBaseT™ RJ45 connectors
• RS-232 Serial Port: 1 x 3-pin phoenix conenctor
• IR Input Ports: 9 x 3.5mm stereo jack
• IR Output Ports: 8 x 3.5mm mono jack
• Rack Mountable: 1U rack height, rack ears included
• Casing Dimensions (W x H x D): 437mm x 44mm x 377mm
(without feet)
• Dimensions (W x H x D): 437mm x 53mm x 384mm
• Shipping Weight: 6.25kg
• Operating Temperature: 32°F to 104°F (-5°C to +55°C)
• Storage Temperature: -4°F to 140°F (-25°C to +70°C)
• Power Supply: Internal 100-240V AC
FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION - changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
CANADA, INDUSTRY CANADA (IC) NOTICES
This Class B digital apparatus complies with Canadian ICES-003.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
CORRECT DISPOSAL OF THIS PRODUCT
This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the return and collection systems or contact the retailer where the product was
purchased. They can take this product for environmentally safe recycling.
Certifications