BluDot Aside Quick start guide

Aside Storage Ladder
DESIGNED IN 2021
ASSEMBLY NOTES | REV 01
@BLUDOT
We design all our pieces in our Minneapolis studio. Follow
along on Instagram for some sneak peeks into the process.
NEED A HAND?
Contact us at [email protected] or
844.425.8368 for assistance.

2 | 844.425.8368 ASIDE STORAGE LADDER
Pt. 2011 Pt. 8055
2 2QTY QTY
Ladder
1QTY
Collar Cap
2 2QTY QTY
Parts & Hardware

[e-mail] |3ASSEMBLY NOTES
PT. 2011 X 2
PT. 8055 X 2
Collar X 2
22.5”
Be sure
countersunk side
is facing outward.
Step 01
HANG THE LADDER ON THE WALL.
Wall anchors and fasteners are included
for installation. Please consult your local
hardware professional to determine the
hardware best suited for your wall type.
Mark the mounting locations spaced 22.5”
apart, using a level to ensure that they are
horizontal.
If the mounting location is not located on a
stud, drill a 1/4” hole in the marked location
and insert the wall anchor by twisting it
clockwise. If one of the mounting locations
are located on a stud, this step of installing an
anchor may be skipped. Instead, drill a 7/64”
pilot hole in the marked position.
Attach the wall screws, collar, and ladder in the
order shown.

4 | 844.425.8368 ASIDE STORAGE LADDER
Step 02
ATTACH THE CAPS.
Attach the caps by threading them clockwise
on the collar.
Additional Information
CLEAN
Clean with a slightly damp, soft cloth. To remove dirt and fingerprints, use a quality
cleaner formulated for metal furniture. Wipe completely dry with a soft cloth.