Blueair 3210 User manual

Blue
3210/3410
User Manual
Manuel utilisateur
Manual del usuario
Manuale per l’utente
Bedienungsanleitung
Gebruikshandleiding
Podręcznik użytkownika
Korisničko uputstvo
Kullanım Kılavuzu
Bruksanvisning
Brukerhåndbok
Käyttöohje
Brugervejledning
Panduan Pengguna
 

3
EN
Blue 3210/3410 4
Safety instructions 6
Get started 8
Filters 11
Care and maintenance 15
Disposal and recycling 17
Help and support 17
Warranty information 17
Specifications 18
Content
Please read this user manual carefully and keep it for future reference.
The latest version of this user manual can be found on www.blueair.com
Note: There may be local variations of these models.
Product name: Model number:
3210 3231101000
3410 3431101000

4
Blue 3210/3410
Blueair purifiers are available in two models. All models have a pre-filter and a HEPASilentTM
main filter to purify air. All Blue models have control functions and a built in sensor.
The air purifier is mainly composed of a motor, a fan and filters. The air purifier removes
contaminants from the air in a room to improve indoor air quality.
You can change the air purifier settings at any time, using the control panel on the air purifier.
Recommendations for best performance
• Use the air purifier in a room that does not exceed the room size recommendation.
• Place the air purifier in a location where air can circulate freely in, out and around the air
purifier.
• Do not place the air purifier closer than 10 cm to another object.
• During operation, keep doors and windows in the room with the air purifier closed.
• Only use original Blueair filters.
• Change the main filter when the filter replacement indicator appears on the control
panel.
• Follow the maintenance instructions in this user manual.

5
ATouch button FMain filter (Particle + Carbon filter)
BAir outlet GPre-filter
CAir quality indicator HAir quality sensor
DFan and motor IPower cable (not in picture)
EFilter shelf ring JUser Manual (not in picture)
E
F
A
B
C
D
H
G

6
Safety instructions
Blue 3210/3410 air purifiers are electrical appliances for indoor use
only, take the necessary precautions to reduce the risk of fire, electric
shock or injury.
• This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in
a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children
without supervision.
• Always disconnect the appliance from the power supply before
maintenance.
• Do not attempt to open or service the appliance yourself. Service
must be done by the manufacturer, service agent or similarly
qualified personnel using only original Blueair spare parts.
• Ensure that the power cable and the power plug are not at risk of
getting damaged. To avoid hazard, a damaged power cable must
always be replaced by the manufacturer, service agent or similarly
qualified person.
• If the appliance is damaged or malfunctions, turn it o, disconnect
it from the power supply and contact Blueair.
• The power plug must be firmly inserted in the power socket.
• When disconnecting the unit from the power supply, do not pull on

7
the power cord, pull on the power plug.
• Use the power cable provided with your Blueair air purifier to plug
directly and firmly into an appropriate, electrical outlet.
• Do not use an extension cord or a power strip. Refer to the rating
label on your appliance.
• Do not alter the power plug in any way. If the plug does not fit into
the outlet, contact qualified personnel to install the proper outlet.
• Do not use the included power cord for anything else but the
appliance.
• Do not allow objects to enter or block the air inlets and air outlets
as this can cause electric shock or damage the appliance.
• Do not place any objects on top of or directly against the
appliance.
• Do not sit on, stand, climb onto or hang from the appliance.
• Keep the appliance, including the power cable, at a safe distance
from heated surfaces and open fire.
• Keep the appliance and power plug away from water and other
liquids.
• Keep the appliance and power plug away from chemicals such as
pesticides and deodorants.
• Place the appliance on the floor. The appliance must be placed on
a stable surface.
• Do not use the appliance outdoors or in wet environments such as
bathrooms, laundry rooms or pool areas.

8
Get started
Step 1
Plug the power cable
into a wall outlet.
Step 2
Press the button to
turn the air purifier
on and adjust the fan
speed mode.
The autostart feature automatically restarts the air purifier at the last set speed if it has
been unplugged, used with a power switch timer, or if a power failure occurs.
In auto mode the air purifier automatically controls the airflow based on air quality
information from the sensor.
Autostart
Auto mode
Available settings are: Auto, Night, Everyday, Boost and O.
The indicator lights on the touch button indicate the selected fan speed. The lights
automatically dim down completely 5 seconds after pressing the touch button, indicating a
deactivated fan speed control mode. Press the touch button once to reactivate on/o and
fan speed control. The indicator lights light up and you can adjust the fan speed mode again.
On/O and fan speed controls

9
Press once to turn the unit On and to set it to Auto mode.
On/Auto mode
Press twice to set to Night mode (low fan speed)
Night mode
Press three times to set to Everyday mode (medium fan speed).
Everyday mode
Press four times to set to Boost mode (high fan speed).
Press five times to turn the unit O.
Boost mode
O

10
Air quality information
The air quality levels for particulate matter (PM) are indicated using a color scale on the air
quality indicator. The air quality indicator is completely dimmed in Night mode.
Air quality level (PM 2.5)
PM2.5, Particulate matter, particles with diameter of size 2.5 micrometers or less.
Polluted
Moderate
Good

11
Button control functions
Filters
The air purifier is delivered with a fabric pre-filter and a main filter. The filters purify the air
from both particles and gases. For best performance, clean the pre-filters regularly and
change the main filter when the air purifier indicates filter change.
To find the right main filter for your air purifier, use the Blueair app or visit www.blueair.com.
The model number of your air purifier can be found on the rating label on the air purifier.
Change filter
When the indicator
light turns red (after 6
months of operation)
you should change the
main filter.
Filter replacement
indicator
Press the button down
for 7 seconds to reset
the filter replacement
indicator.
Blueair filter subscription program
Use the Blueair app or visit www.blueair.com to sign up for the Blueair filter subscription
program. (Not available in all markets)
Important! Always turn o and disconnect the appliance from the power supply before
changing filters, cleaning or carrying out maintenance procedures.

12
Clean and change the pre-filters
For best performance, clean the pre-filter regularly. Vacuum the exterior of the fabric pre-
filter with a soft brush attachment to remove dust. If the pre-filter requires a deeper clean,
wash it on a gentle, low-temperature cycle in the washing machine.
Important! Press the Velcro strips together on the pre-filter before machine wash.
Step 5
Wash the pre-filter in the
washing machine, according
to instructions on the pre-
filter´s label.
Step 1
Turn the unit o and unplug
it.
Step 3
Remove the top cylinder from
the unit.
Step 2
Carefully push the top
cylinder down while rotating
counterclockwise to unlock.
Step 6
Place the pre-filter back onto
the unit.
Adjust the pre-filter and the
panel to hide the power cord
in the back.
Step 7
Carefully push the top
cylinder down, at the
same time rotating it
clockwise to secure it back
into the lock.
Step 8
Plug in the unit.
Step 4
Open the pre-filter panel and
remove the pre-filter.

13
Change the main filter
When changing the filter, vacuum any dust that may have accumulated inside the unit.
Important! Use only original Blueair filters suitable for the model to ensure proper function
and performance of the air purifier, and to qualify for full warranty coverage.
Step 5
Open the pre-filter panel and
remove the pre-filter.
Step 7
Grip the filter handles and
pull upwards to remove the
main filter from the inner
structure.
Step 1
When the indicator light
glows red, it’s time to change
the main filter.
Step 3
Carefully push the top
cylinder down while rotating
counterclockwise to unlock.
Step 2
Turn the unit o and unplug
it.
Step 6
Carefully remove the filter
shelf ring.
Step 8
Position the new main filter
onto the inner structure.
The filter handles should
face upwards.
Step 4
Remove the top cylinder
from the unit.

14
Step 13
Press the touch button for
a duration of 7 seconds to
reset the filter replacement
timer.
This lets the air purifier know
that you have changed the
filter.
The indicator light flashes for
4 seconds, and then changes
from red to white.
Step 9
Press the filter shelf ring
firmly into position above the
main filter. The filter shelf ring
protects the top edge of the
main filter from damage.
Step 11
Carefully push the top
cylinder down while rotating
clockwise to secure the lock.
Step 10
Place the pre-filter back onto
the unit.
Adjust the pre-filter and the
panel to hide the power cord
in the back.
Step 12
Plug in the unit.

15
Care and maintenance
General
• Disconnect the air purifier from the power supply before maintenance.
• Do not allow foreign objects to enter the air inlets or air outlets. This may cause electric
shock or damage the air purifier.
• Never clean with gasoline, chemical solvents or corrosive materials as these agents may
damage the air purifier.
• Make sure the air purifier is completely dry before connecting it to power.
• Do not wash the main filter. The main filter is not washable or reusable.
Cleaning
• Wash the pre-filter according to the instructions on the pre-filter´s label or vacuum the pre-
filter with a soft brush attachment.
• Wipe the exterior of the air purifier with a soft, clean, damp cloth.
• Clean and check the power cable and power plug for wear or damages.
• Clean the sensor when changing the main filter.

16
Clean the air quality sensor
The inlet for the air quality sensor is located at the back of the air purifier.
Important! Do not use fingers or any unrecommended objects to clean inside the sensor inlet.
Step 3
Remove the top cylinder
from the unit.
Step 4
Press the button on the
inside of the unit to open
the lid covering the sensor
and remove the lid.
Step 5
Gently clean the sensor with
a cotton swab, and attach
the sensor lid
Step 2
Carefully push the top
cylinder down while rotating
counterclockwise to unlock.
Step 6
Carefully push the top
cylinder down while
rotating clockwise to
secure the lock.
Step 7
Plug in the unit.
Step 1
Turn the unit o and unplug
it.

17
Warranty information
The Blueair Limited Warranty applies only if the air purifier is installed, used and maintained
according to the instructions in this manual.
For warranty conditions, please visit www.blueair.com/warranty
Warranty and returns
If you purchased the air purifier at one of our authorized retailers, please contact the same
store to request assistance.
Help and support
If you have questions about your product, please visit www.blueair.com or contact your local
Blueair retailer.
To contact Blueair for personalized support, please visit www.blueair.com/customer-support
The crossed-out waste bin symbol on the appliance or on its packaging means that
at the end of its useful lifespan, the product must be disposed of separately from
ordinary household wastes.
This air purifier should be recycled as electronic waste and the filter recycled as plastic
according to local regulations. If you have questions regarding the disposal of this air purifier,
please contact your local authorities or Blueair dealer and ask for the correct method of
recycling.
Disposal and recycling

18
Specifications
Blue 3210 Blue 3410
Input Power, Frequency 100-240VAC 50/60Hz 100-240VAC 50/60Hz
Power consumption/
Rated input power 2-10W 3-35W
Sound level (min/max)1 18-48 dB 23-53 dB
Recommended room size217 m2 36 m2
CADR Smoke2210 m3/h 425 m3/h
CADR Dust2181 m3/h 425 m3/h
CADR Pollen2163 m3/h 415 m3/h
1 Sound pressure according to GB/T18801 and GB4214.1
2According to ANSI/AHAM AC-1-2019

19
FR
Blue 3210/3410 20
Consignes de sécurité 22
Prise en main 24
Filtres 27
Entretien et maintenance 31
Élimination et recyclage 33
Aide et support 33
Informations de garantie 33
Caractéristiques techniques 34
Contenu
Veuillez lire attentivement ce manuel d'utilisation et le conserver pour vous y reporter
ultérieurement.
La dernière version de ce manuel d'utilisation est disponible sur www.blueair.com
Remarque: il peut exister des variantes locales de ces modèles.
Nom du produit: Numéro de modèle:
3210 3231101000
3410 3431101000

20
Blue 3210/3410
Blue purificateur d'air est principalement composé d'un moteur, d'un ventilateur et d'un filtre.
Le purificateur d'air élimine les contaminants de l'air dans une pièce pour améliorer la qualité
de l'air intérieur.
Vous pouvez modifier les paramètres du purificateur d’air à tout moment, à l’aide du panneau
de commande du purificateur d’air.
Recommandations pour des performances optimales
• Utilisez le purificateur d'air dans un espace qui ne dépasse pas la taille de pièce
recommandée.
• Placez le purificateur d'air dans un endroit où l'air peut circuler librement à l'intérieur,
à l'extérieur et autour du purificateur.
• Ne placez pas le purificateur d'air à moins de 10 cm d'un autre objet.
• Pendant le fonctionnement, maintenez fermées les portes et les fenêtres de la pièce
où est installé le purificateur d'air.
• N'utilisez que les filtres Blueair d'origine.
• Changez le filtre principal lorsque l'indicateur de remplacement du filtre apparaît sur
le panneau de contrôle .
• Suivez les instructions d'entretien de ce manuel d'utilisation.