Bluestream TTG-1EU User manual

TTG-1EU QUICK REFERENCE GUIDE
Contact: [e-mail] |[e-mail] |[e-mail]
01
TTG-1EU
Quick Reference Guide
Our TTG-1EU is a single Euro module mounting grommet, designed to be mounted
into a table top.
The module housing allows for any standard 50mm x 50mm, or 2x half width euro
modules to be neatly secured into this brushed aluminium faceplate.
Alternatively, the unit is supplied with a universal cable management enclosure,
allowing fixing for up to 3x AV, data or power cables to be routed or secured for
easy access on a boardroom table or desk as required.
Introduction
FEATURES:
• Fits all standard (50mm x 50mm), and half width (25mm x 50mm) Euro modules
• Supplied with a cable management enclosure for securing of up to 3x cables inside the grommet
• Premium black brushed aluminum faceplate finish
Specifications
External Dimensions (W x H x D): 90mm x 90mm x 92mm
Cut Out Dimensions (W x H): 73mm x 73mm
Shipping Weight: 0.45 Kg
Operating Temperature: 32°F to 131°F (0°C to 55°C)
Storage Temperature: - 13°F to 158°F (- 25°C to 70°C)
Package Contents
1x TTG-1EU
1x Plastic insert for cable management
2x Cable management plates
2x Table top mounting brackets
2x Wing-nut bolts
1x Cut template
1x Quick Reference Guide
REVA1_QRG_TTG-1EU_091221.indd 1REVA1_QRG_TTG-1EU_091221.indd 1 09/12/2021 15:1909/12/2021 15:19

TTG-1EU QUICK REFERENCE GUIDE
www.blustream.com.au |www.blustream-us.com |www.blustream.co.uk
02
Assembly of the TTG-1EU
1Attach the side support brackets (labelled ‘B’) to the metal frame to give ridigity to the chassis if these have not
already been attached, before installing into the mounting surface.
2Slide the metal chassis of the TTG-1EU (labelled ‘A’) into the hole cut of the mounting surface or table.
3Attach the triangular table top mounting brackets (labelled ‘C’) to the side of the metal chassis in either of the
mounting slots (labelled ‘D’) .
4Insert the wing nut bolts and feet as per the diagram below (labelled ‘E’) and tighten to clamp to the mounting
surface, be careful not to overtighten the screws.
5The assembled item should look like the diagram below on the right (labelled ‘F’)
Mounting the TTG-1EU
Use the supplied cut template to cut out the hole for the TTG-1EU to sit inside.
C
D
B
90mm (Height of table top kit)
90mm (Width of table top kit)
TTG-1EU Cut-Out Template
73mm (Height of cut-out)
73mm (Width of cut-out )
C
M
Y
CM
MY
CY
CMY
K
RevA0_TTG-1EU_Cut_out_Working.pdf 1 19/10/2021 09:16
E
F
A
REVA1_QRG_TTG-1EU_091221.indd 2REVA1_QRG_TTG-1EU_091221.indd 2 09/12/2021 15:1909/12/2021 15:19

TTG-1EU QUICK REFERENCE GUIDE
Contact: [e-mail] |[e-mail] |[e-mail]
03
Assembly of the TTG-1EU
Once the main unit has been secured to the surface it is being mounted to, the TTG-1EU has several options for inserts
to be mounted into it as follows:
• 1 x single Euro module insert (not included)
• 2 x half Euro module inserts (not included)
• Cable management plate for securing up to 3x cables inside the grommet (included)
Euro Module Mounting
Below is a diagram showing how a Euro module would be inserted into the TTG-1EU:
Cable Management Plate
When using the TTG-1EU for passing cabling through the opening of a work surface or table top, slide the plastic insert
for cable management (labelled ‘G’) into the top of the TTG-1EU.
The TTG-1EU is supplied with a bracket for securing up to 3x cables inside the grommet (labelled ‘H’). Use the two plates
together as per the below diagram to secure the cables inside the openings, ensuring you run your cables through the holes
before securing them into the TTG-1EU.
GH
Euro Plate Module
TTG-1EU
REVA1_QRG_TTG-1EU_091221.indd 3REVA1_QRG_TTG-1EU_091221.indd 3 09/12/2021 15:1909/12/2021 15:19

REVA1_QRG_TTG-1EU_211209
www.blustream.com.au
www.blustream-us.com
www.blustream.co.uk
Notes
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
REVA1_QRG_TTG-1EU_091221.indd 4REVA1_QRG_TTG-1EU_091221.indd 4 09/12/2021 15:1909/12/2021 15:19