BLUM TANDEM plus BLUMOTION 563.4570B User manual

Bottom mount holes
Runner All 563.
X358 (14-3/32")
TANDEM plus BLUMOTION 563.
Application
■Four-dimensional adjustment
■Elongated holes for depth adjustment
■Bottom mounting holes
■100 lb static load capacity
Product info
TANDEM plus BLUMOTION
New product
■ Full extension concealed drawer runners
■ Panel or blocked-out face frame cabinets
■ BLUMOTION soft closing
■ TANDEM smooth running action
■ Available in 18" and 21" lengths
■13 (1/2") to 16 (5/8") drawer thickness
■Made in the U.S.A.
Also features
NOTE: For 563. runners, rear brackets and sockets cannot be used.
Cabinet sides must be blocked-out flush with the inside of the frame.
Subject to technical modifications without notice. © 2012 Blum, Inc.
Dimensions in millimeters (inch equivalents as noted) LIT.TDM4103.06.12
3 (1/8")
X
67 (2-5/8")
9 (11/32")
12 (15/32")
19 (3/4")
9 (11/32")
Side adjustable locking device
■ Minimum inside drawer width 170 (6-11/16")
■ Height adjustment +3(1/8")
■ Side adjustment ±1.5 (1/16")
■ For use with 563/569 series runners only
Part no.
Right locking device T51.1901 R
Right and left
required per drawer
Left locking device T51.1901 L
Installation screw 606N or 606P
■
M
■
H
■
S
■
F
Depth adjustable locking device
■ Optional for inset applications
■ Offers 2.5 (3/32") out adjustment, preset at 0
■ Height adjustment +3(1/8")
■ Side adjustment ±1.5 (1/16")
■ For use with 563/569 series runners only
■ Minimum sub front thickness 13 (1/2")
■ Designed for 13 (1/2") bottom recess
■ Integrated 3(1/8") distance bumper
■ See LIT.TDM1100 for setback information
Part no.
Right locking device T51.1901.PS R
Right and left
required per drawer
Left locking device T51.1901.PS L
Installation screw 606N or 606P
■
■
■
■
■
Top view
Runner
Locking device
New features Basic components
Components
Runner set
One set required per drawer
For overall
cabinet depth Drawer length TANDEM plus BLUMOTION
533 (21") 457 (18") 563.4570B
610 (24") 533 (21") 563.5330B
Wood screw for installation 606N or 606P
System screw for installation 662.1150.HG
BLUMOTION
inside

Front view
Calculating outside drawer width
For drawer side thickness 16 (5/8") 15 (19/32") 14 (9/16") 13 (1/2") 12 (15/32")
Deduct from inside cabinet width 10 (13/32") 12 (15/32") 14 (9/16") 16 (5/8") 18 (23/32")
Example: For 21" opening width and a 5/8" thick drawer, 21" minus 13/32" = 20-19/32" drawer width
Maximum drawer thickness 16 (5/8")
Lengths available 18"- 21"
Static load capacity 100 lb
minimum top
clearance
6(1/4")
drawer side thickness
maximum 16 (5/8")
13 (1/2")
bottom recess
14 (9/16")
bottom clearance
37
(1-15/32")
21 (13/16")
drawer height
maximum =
opening minus
20 (13/16")
opening width
opening height
opening width minus 42
Subject to technical modifications without notice. © 2012 Blum, Inc.
Dimensions in millimeters (inch equivalents as noted) LIT.4103.06.12
Drawer and cabinet specifications
Drawer back preparation
NOTE: Material thickness may vary. Inside drawer width must equal opening width
minus 42 for TANDEM to align and run properly.
606N or 606P
screws
662.1150.HG
or
Runner mounting specifications
Runner close-up
TANDEM plus
BLUMOTION drawer length minimum inside cabinet depth runner length screw location
A
563.4570B 457 (18") 480 (18-29/32") 471 (18-17/32") 261 (10-9/32")
563.5330B 533 (21") 557 (21-15/16") 548 (21-9/16") 261 (10-9/32")
7 (9/32")
11 (7/16")
Ø6 x 10
bore for hook
35 (1-3/8") minimum rear notch
13 (1/2")
25 (31/32")
37 (1-15/32")
32 (1-1/4")
34 (1-11/32")
7(9/32")
9(11/32") typ.
Runner comparison
NOTE: Same hole pattern as the 563H
563.
563H
10 (13/32")
37 (1-15/32")
3(1/8") setback
runner length
A
inside cabinet depth
blocking for
frame applications
32 (1-1/4")
NOTE: The orange dots indicate fixing screw locations required to meet specified load ratings.
NOTE: Elongated holes are for
±4.5 (3/16") depth adjustment only.
Additional screws must be used to
secure the runner to the cabinet.
Side view
Rear view
Side view
Front view