BM PRO JAYCOMMAND TravelLINK User manual

OWNER’S MANUAL
TEAMBMPRO.COM

POWERING YOUR ADVENTURES
With over 50 years’ experience in
power solutions combined with
manufacturing and design facilities in
Melbourne, Australia, BMPRO are the
leading experts in RV power and control
management.
Inspired by the great outdoors, we
have created a range of rugged, smart
and reliable products to power your
adventures.
Our range of battery, power and RV
management control systems gives
you peace of mind when you are on the
road, so that you can relax in even the
most far flung destinations, knowing
you have control over your power
needs.
To learn more about the BMPRO range
of products, please visit our website
teambmpro.com
TEAM
BMPRO
.COM

SAFETY PRECAUTIONS
Please read the Safety Precautions before installing or using the system. Be
sure to observe all precautions without fail. Failure to observe these instructions
properly may result in personal damage, or personal injury which depending on the
circumstances may be serious and cause loss of life.
WARNING
Correct installation is the most critical factor in ensuring the safe use of the system. If
every consideration of these instructions has been satisfied, the system will be safe
to operate.
Do not drop or vigorously shake the product as this may cause damage. Do not shock
the product or its accessories as this may cause the product to fail, catch fire or
explode.
Stay away from magnetic equipment. Radiation may erase the information stored on
this product, causing it to become inoperative.
Electricity and water do not mix. Keep this product and your battery dry and do not
expose it to water or water vapor. Do not operate this product or battery near any sort
of liquid. Do not operate this product with wet hands.
Do not use this product in environments that are excessively hot, cold, dusty or humid
or where it will be exposed to magnetic fields or long periods of sunshine. Such
exposure may cause the product or your battery to fail, catch fire or explode.
Clean the housing of this product lightly with a dry or moist cotton cloth. Do not use
alcohol, thinners, benzene or any other chemical cleaner.
The system is a high precision electronic product. It contains no user-serviceable
parts inside. Do not try to dismantle, modify or repair it yourself. Disassembly, service
or repair by an unauthorized person will void the warranty.
Before using this product, check that cable connections to the battery are of correct
polarity. To protect against accidental short circuit, ensure that the shrouding
supplied with the batteries are always fitted to the battery terminals.
Do not install this product in the same compartment where flammable materials,
such as petrol is stored.
Product specifications are subject to change and improve without notice.

INFORMATION FOR THE USER
This device complies with Part 15 of the FCC Rules, and Innovation, Science and
Economic Development Canada’s license-exempt RSS(s). Operation is subject to
the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including what may have
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency and energy. If
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.
Le présent appareil est conforme aux CNR d’Innovation, Sciences et
Développement économique Canada applicables aux appareils radio exempts de
licence. L’exploitation est autorisée aux deux conditions suivantes:
1. L’appareil ne doit pas produire de brouillage;
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement
WARNING
Any changes or modification are not approved by BMPRO and will void compliance of
the product and the user’s authority to operate this equipment.
AVERTISSEMENT
Tout changement ou modification non expressément approuvé par BMPRO pourrait
annuler la conformité du produit et le pouvoir de l’utilisateur d’utiliser cet équipement.

CONTENTS
SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . 4
INFORMATION FOR THE USER . . . . . . . . . . . . . . . . . . . . . .5
ABOUT THE SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . 8
NODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
DISPLAY/CONTROLLER (MODEL DEPENDENT) . . . . . . . . . . . . . . .9
APP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
SMARTCONNECT . . . . . . . . . . . . . . . . . . . . . . . . . . .9
BLEXTENDER . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
ADDITIONAL MOTOR CONTROL . . . . . . . . . . . . . . . . . . . . .9
DESCRIPTION OF PARTS. . . . . . . . . . . . . . . . . . . . . . . . 10
DISPLAY (MODEL DEPENDENT) . . . . . . . . . . . . . . . . . . . . 10
DISPLAY NAVIGATION (MODEL DEPENDENT). . . . . . . . . . . . . . . 11
CONTROLLER (MODEL DEPENDENT) . . . . . . . . . . . . . . . . . . 13
CONTROL PANEL MENU FUNCTIONS (MODEL DEPENDENT) . . . . . . . . 15
PAIRING TO THE NODE . . . . . . . . . . . . . . . . . . . . . . . . 16
PAIRING TO THE NODE WITH A DISPLAY (MODEL DEPENDENT) . . . . . . . 16
PAIRING TO THE NODE WITH A CONTROLLER (MODEL DEPENDENT) . . . . . 17
BMPRO CLOUD (MODEL DEPENDENT) . . . . . . . . . . . . . . . . . . 19
CONNECTING TO THE BMPRO CLOUD. . . . . . . . . . . . . . . . . . 19
CLOUD CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . 21
DELETING A CLOUD ACCOUNT . . . . . . . . . . . . . . . . . . . . 21
WINEGARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
THE APP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
SIDEBAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
APP HOME SCREEN . . . . . . . . . . . . . . . . . . . . . . . . . 26
QUICK START (MODEL DEPENDENT) . . . . . . . . . . . . . . . . . . 26
TANKS SCREEN. . . . . . . . . . . . . . . . . . . . . . . . . . . 29
MOTORS SCREEN . . . . . . . . . . . . . . . . . . . . . . . . . . 29
CLIMATE SCREEN . . . . . . . . . . . . . . . . . . . . . . . . . . 32
LIGHTS SCREEN . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Designed by BMPRO, one of Australia’s leading power solution experts, the BMPRO product
range is proudly designed and manufactured in Melbourne, Australia, and represent a high-
quality product that will provide years of service.
DISCLAIMER: BMPRO accepts no liability for any loss or damage which may occur from the
improper or unsafe use of its products. Warranty is only valid if the unit has not been modified
or misused by the customer.
MANUAL PART 038756
REV 8.0
Copyright © 2023
6

ENERGY CENTER. . . . . . . . . . . . . . . . . . . . . . . . . . . 34
BATTERY AND FUEL . . . . . . . . . . . . . . . . . . . . . . . . . 34
GENERATOR (MODEL DEPENDENT) . . . . . . . . . . . . . . . . . . 34
AUTOMATIC GENERATOR START . . . . . . . . . . . . . . . . . . . . 35
SOLAR CONTROLLER . . . . . . . . . . . . . . . . . . . . . . . . 36
INVERTER (MODEL DEPENDENT) . . . . . . . . . . . . . . . . . . . 37
GENERAL SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . 38
SENSOR SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . 41
ENERGY CENTER SETTINGS . . . . . . . . . . . . . . . . . . . . . 42
MOTOR SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . 44
INVERTER SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . 45
SOLAR CONTROLLER SETTINGS . . . . . . . . . . . . . . . . . . . . 46
UNIT PREFERENCES. . . . . . . . . . . . . . . . . . . . . . . . . 48
DIAGNOSTICS . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
VOICE CONTROL (MODEL DEPENDENT) . . . . . . . . . . . . . . . . . 52
UPDATING FIRMWARE (MODEL DEPENDENT) . . . . . . . . . . . . . . . 53
SWITCH (MODEL DEPENDENT) . . . . . . . . . . . . . . . . . . . . . 54
CHECKING THE BATTERY IN YOUR SWITCH . . . . . . . . . . . . . . . 54
REPLACING THE BATTERY IN YOUR SWITCH . . . . . . . . . . . . . . . 54
FAQS AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . 55
PAIRING WITH THE NODE. . . . . . . . . . . . . . . . . . . . . . . 55
APP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
CONTROLLER (MODEL DEPENDENT) . . . . . . . . . . . . . . . . . . 56
SWITCH (MODEL DEPENDENT) . . . . . . . . . . . . . . . . . . . . 57
APPENDICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 58
LIMITED WARRANTY TERMS AND CONDITIONS . . . . . . . . . . . . . . 59
7

ABOUT THE SYSTEM
The system brings smart home technology to your RV, taking control and
management of your RV to new horizons!
8

DISPLAY/CONTROLLER (MODEL DEPENDENT)
The sleek, wall-mounted Display or Controller gives you the freedom to monitor
and control multiple RV functions.
Monitor: Water tanks, Temperature, Tire Pressure, Battery and LPG.
Control: Lighting, Slide-outs, Awnings, Jacks, Heating and Cooling Systems,
Generators and leveling.
NODE
The heart of the system, the Node, is an RV management system that powers and
monitors your RV features and accessories.
The Node communicates via RV-C to the Display or Controller (depending on
your model) and Bluetooth Low Energy with your smartphone, to receive the
commands to control power to all your RV features and accessories.
SMARTCONNECT
Your system is SmartConnect ready!
With SmartConnect Bluetooth sensors, you can remotely monitor various
aspects of your RV, such as tire pressure, propane tank levels and individual
temperatures.
Through the App these sensors are a great addition to enhance your overall
experience.
SmartConnect sensors are available through your local RV dealership. For more
details, refer to teambmpro.com/products/smartconnect
APP
The App allows you to monitor and control your RV on up to 4 personal devices via
Bluetooth.
The App is available both for Android and iOS.
BLEXTENDER
Your system is compatible with BMPRO’s BLExtender.
The BLExtender is a Bluetooth range extender, designed to allow you to use your
SmartConnect Bluetooth sensors from every corner of your RV without worrying
about losing Bluetooth signal.
For more details, refer to teambmpro.com/products/bluetooth-range-extender
ADDITIONAL MOTOR CONTROL
Your system supports additional motor control.
For more information about additional motor control, contact Jayco.
9

DISPLAY (MODEL DEPENDENT)
1 3
2 4
5
ALL INTERIOR LIGHTS ALL EXTERIOR LIGHTS INTERIOR & EXTERIOR WATER PUMP MAIN A/C
1. Page Navigation Button
Move between function screens, eg. From Tanks to Water screen.
2. Menu Navigation Button
Navigate between items within a page, e.g. in the Water page move from
Pump to Elec Heater.
3-4. Action Buttons
The function for each of the action buttons changes depending on the
selected menu item. These functions will be displayed on the screen, eg.
OK, EXT, RET, On, Off.
5. Redundancy Buttons
Turn lights and water pump on or off. The climate button takes you to the
main climate page.
Adjusting the Lights
QUICK press toggles between off and the previous stored brightness.
LONG press sets the light brightness to 100%.
DESCRIPTION OF PARTS
10

DISPLAY NAVIGATION (MODEL DEPENDENT)
Use the Page Navigation Button to move from page to page.
Use the Menu Navigation Button to move between menu items within a page.
Climate
Room: The ambient room temperature.
Set: User-controlled temperature setting.
Range: 33ºF – 90ºF (1ºC to 32ºC)
Modes: Off / Fan / Cool / Auto-Cool / heat PUMP /
FURNACE / HEAT-BOTH
Fan: Settings: HIGH / LOW
AC Controls are RV model dependent.
NOTE: This indicates a fault with one of the
climate outputs or the temperature sensor.
A sensor fault is also indicated by no room
temperature value being shown, eg. -- F
Motor
Press the EXT or RET Action buttons to control
the motors.
This menu list is RV model dependent.
Water
From the Water screen, the Pump, the Electric
and Gas Heaters can be switched on and off.
NOTE: A warning will appear if the Gas Heater
fails to ignite after three attempts.
Tanks
The Tanks display shows the levels of fresh, gray
and black water tanks. Levels are displayed as:
FULL
2/3 FULL
1/3 FULL
EMPTY
11

Advanced
Forget All Dv: Forget ALL Bluetooth Devices.
Pair Switch: Pair BLE Switches.
Forget All Sw: Forget all BLE Switches.
SW: Node software version.
Settings
Pair Device: Press OK to pair to a device.
Advanced: Press OK to go to the Advanced menu.
Temp. Unit: Toggle between Fahrenheit & Celsius.
D-SW: Indicates the software version on the
Display.
Energy
ON: Press and hold the ON action button, until the
generator turns on.
OFF: Press and hold the OFF action button, until
the generator turns off.
NOTE: A generator warning will appear if the
generator fault LED is actively blinking.
If Furnace Mode is selected, the AC-Fan option
displays.
AC-Fan: Settings: OFF / LOW
12

CONTROLLER (MODEL DEPENDENT)
1. Controller Home Screen Button
2. Connection Bar
When connected to Bluetooth, the icon will appear on screen.
When connected to the cloud, the icon will appear on screen.
Both icons will appear when both services are available.
3. Settings Icon
Access to the App General Settings.
This button is only available on the Home screen.
4. Return
Navigate to the previous screen.
5. Main Screen Button
Navigate to the Controller’s tablet Android screen.
6. Recent Applications
Display a list of recently used / background applications on the Controller.
7. Reset Pinhole
To reset the Controller, vertically insert an item (eg. a paper clip) into the reset
pinhole.
NOTE: The item must be inserted vertically as the reset hole is in a plastic
housing.
8. Control Panel (Model Dependent)
To provide quick access to lights, water pump and motor operation while the
Controller is in use.
Any button press on the Control Panel will turn the tablet on if it has turned
off.
1
2
3
4 5 6 7
8
910 11 12 13
13

10.Motor Operation (Model Dependent)
To extend (EXT) and retract (RET) any motors installed in the RV.
NOTE: These buttons are also used during the pairing process between the
Node and devices such as the Controller and smartphone.
11.& 13. Navigation Buttons (Model Dependent)
Use navigation buttons to scroll through the Control Panel menu functions
For more information on available functions, refer to the Control Panel Menu
Functions section.
12.Menu Display (Model Dependent)
Displays the current menu function.
9. Lights (Model Dependent)
Turn lights and water pumps on/off:
All Interior Lights
All Exterior Lights
All Lights
or Water Pump Control
Adjusting the Lights
QUICK press toggles between off and the previous stored brightness.
LONG press sets the light brightness to 100%.
14

CONTROL PANEL MENU FUNCTIONS (MODEL DEPENDENT)
The menu functions on the Controller’s Control Panel allow you to operate
various motors, quickly switch off loads and pair or clear the Node.
The following functions apply depending on what is available in your RV.
Awnings
Navigate to the desired awning:
A1 (Awning 1)
A2 (Awning 2)
then press EXT or RET to operate.
Slide-outs
Navigate to the desired slide-out:
S1 (Slide-out 1)
S2 (Slide-out 2)
S3 (Slide-out 3)
S4 (Slide-out 4)
S5 (Slide-out 5)
S6 (Slide-out 6)
then press EXT or RET to operate.
Pairing
To pair the Node with the Controller, your
own smartphone, or to clear the Node of
any pairings.
For more information, see Pairing to the
Node with a Controller and FAQs and
Troubleshooting.
Off (Model Dependent)
Navigate to OF, then press EXT to turn
power OFF to all appliances.
The OF function will not shutdown
generators connected to the Node.
Navigate to the OF function, then
press EXT to confirm that power to all
accessories should be turned off.
NOTE: The Controller will turn off after
10 seconds. The Controller can be turned
back on by pressing any of the Light
buttons on the Control Panel.
Ramp Door
Navigate to the desired ramp door, then
press EXT or RET to operate.
Jacks
Navigate to the desired Jack:
J1 (Landing Jack)
J2 (Front Stabilizing Jack)
J3 (Rear Stabilizing Jack)
then press EXT or RET to operate.
15

For additional support, refer to the FAQs and Troubleshooting section.
When your smartphone is paired with the Node, the Bluetooth icon is displayed on
the App home screen.
PAIRING TO THE NODE WITH A DISPLAY (MODEL DEPENDENT)
Pairing your smartphone to the Node is simple. The App will guide you through
the process.
The Node can be paired to a total of four devices.
1. Launch the App on your phone and choose the device installed in your RV
2. Press the Page Navigation Button to navigate to the Settings page.
3. When “Pair Device” is highlighted, press the OK function button and your
smartphone will begin pairing to the Node.
2 3
1
CONGRATULATIONS,
YOU’RE CONNECTED!
PAIRING TO THE NODE
16

PAIRING TO THE NODE WITH A CONTROLLER (MODEL DEPENDENT)
Pairing your Controller, smartphone or tablet to the Node is done in three easy
steps. The App will guide you through the pairing process.
NOTE: The Controller will have been paired to your Node at the factory. You
should only need to pair your own device or smartphone to the Node.
While the Node can be paired to a total of four devices (including the Controller),
you can only pair one device at a time to the Node.
1. Launch the App on your phone.
2. Using the <or >buttons on the Controller, navigate to the PA menu item.
3. When ‘PA’ appears on the display, press the EXT button to start the pairing
process to the Node. ‘PA’ will blink for a maximum of 30 seconds or until a
device is connected.
WARNING
Only press the EXT button once, do not hold the button down. Holding the button down
for too long may cause all devices to unpair from the Node.
17

Cannot Pair to the Node
If you are pairing a mobile device to the Node and pairing fails, or "--" appears
on screen, it is mostly likely that four devices are connected to the Node
simultaneously. To resolve this, either:
9Close the app on one of the devices that are connected to the Node and try
again, or
9Clear the memory of the Node of all the previously paired devices.
4. When pairing is successful, you will be taken to the App home screen and the
Bluetooth icon will be visible.
CONGRATULATIONS, YOU’RE CONNECTED!
For additional support, refer to the FAQs and Troubleshooting section.
18

BMPRO CLOUD (MODEL DEPENDENT)
Systems with a Controller have cloud control, which allows you to remotely
connect, monitor and control your RV from your smart device.
CONNECTING TO THE BMPRO CLOUD
To connect to the BMPRO Cloud for the first time:
1. Connect your Controller to the Internet via Wi-Fi.
2. Launch the App.
3. From the App home screen, press the Settings icon.
4. Press Remote Connection.
5. Press Create account.
6. Enter your full name, email address and a password of your choice.
WARNING
You can only connect to the BMPRO Cloud if your RV is equipped with a Controller.
WARNING
Keep your password in a safe place and only share details with others if you want them
to access and control your RV!
19

7. Press Create account.
8. An email will be sent to your account to verify your email address. Click on the
link provided in the email to complete verification.
9. Now connect your smart device using your BMPRO account details to get
started.
Press RESEND VERIFICATION EMAIL to complete the email verification process.
Forgot Your Password
If you have forgotten your Cloud account password, press Forgot your password
in the login screen, enter your email address and press SEND EMAIL.
Account Not Verified
If the email address was not verified, the following message will appear:
20