BOA 69-KEY-CARD User manual

electronic locks

www.boasecure.com | 516-576-0295
2
national service providers
BOA SECURITY TECHNOLOGIES, INC.
Located in Huntington, New York, we originally established our
business in 1997 under the name of BOA Handcuff Company,
Inc. At that time our business focus was solely our patented
High Security Handcuffs for Correctional Facilities worldwide.
In 2014 we rebranded our company and began competing for
business in the area we all knew best; Retail Cabinet and Showcase
Locks. However, we are much more than just a manufacturer,
distributor or service provider. We are integrators. We nd the best
product or mix of products to nd solutions for our customers.
We take pride in what we do and who we do it for. We do not
work on excessive margins as many of our competitors. We work
on smaller margins, do a great job and have built our business
accordingly. We service some of the best and biggest retailers
and correctional facilities in the world and would be proud to add
you to our list of happy clients.
WHAT:
Specialized Manufacturer, Distributor and Field Service Provider
of Locks used by Retailers for both their showcases as well as
interior and perimeter doors.
WHY:
We will save you money and ensure your security via a diversied
vendor base with equivalent if not better products and services.
WHERE:
BOA services our clients all through the United States and Canada.
WHEN:
Typical lead times for orders are 7-10 days after receipt of order.
Typical response times to “request for service” are within 24 hours.
If you require faster service, just tell us so.
Ramp up Time for transferring business to BOA from current
vendor is 45 days for BOA to prepare component inventory to
meet your immediate needs.
HOW:
Utilizing our extensive inventory of components (either
manufactured by us or simply distributed by us), we provide
showcase locks and door hardware that meet your specic needs
for plug and play replacement or new installations. In addition,
our Field Service Tech’s are ready to go at a moment’s notice
anywhere throughout the U.S. and Canada. Just send us an email
and we will take the issue off your plate.

516-576-0295 | www.boasecure.com
3
national service providers
Access control systems enable administrators to control access to secure areas via physical and electronic means. Our products are
offered in both offline, online and with wired or wireless solutions. They meet all the challenges posed by a high turnover of people
entering or exiting any facility. Our multiple product lines have either been developed by experts in the field and are often expanded on
by us to meet specific needs for standalone situations.
CONCEALED CARD ACCESS
ELECTRONIC LOCKING SYSTEM
#69-KEY-CARD-USER
#69-EFL-3-304LOCK #69-EFL-1-3MLOCK
MINI MAG DESIGN FOR CABINETS
#69-MCL-1MAGLOCK
(80 LBS PULL)
#69-FT200 CONTROLLER #69-FT200 CARD READER
Basic System Components:
— Controller
— Power Supply
— Card Reader
— Electronic Locks
— Access Cards
System Features:
— Modular locking system for doors and drawers.
— Low voltage operation - operates on 12VDC.
— Works with individual power supply units or central power supplies
with optional battery backup.
— Option for fail safe (unlocks when power is lost).
— Option for fail secure (remains locked when power is lost).
— Slam Function (allows door or drawer to close and secure
without requiring unlocking).
— Allows multiple locks to connect with controllers.
— No computer necessary for level or card programming.

www.boasecure.com | 516-576-0295
4
national service providers
69-FT200 CONTROLLER
#69-FT200 CARD READER
CONCEALED CARD ACCESS
ELECTRONIC LOCKING SYSTEM
Features:
— Up to 228 keys can be authorized at a single terminal.
— Indication of lock state through LEDs (red/green) and audible beep.
— Configurable locking state.
— Cycle operation: Can be configured for 1-120 seconds with optional
configuration key card (Pre-set default time 3 seconds).
— Toggle operation: Present key to open, re-present key to lock.
— If an authorized electronic key is presented to the unit, all locks
are activated simultaneously.
— Optional output extender: If an authorized electronic key is
presented to the unit, independent control of up to 8 electronic
locking units is possible.
— Optional LED interface (customer supplied).
— Direct connection of up to 4 EFL 3/EFL 3C
— Connection of 2 antennas
— Extension of functions possible using individual macros
Specifications:
Voltage required: 12-17 VDC or 11-14 VAC
Switching voltage rating: 14V
Current consumption Continuous: 75 mA
Peak: 750 mA
Output extender: 50 mA each
Temperature range (Inside only): 0 °C - 60 °C (32 °F - 140 °F)
Supplied with:
— (1x) electronic lock controller
— Mounting tabs
— Extension cord 1 m (39-3/8”)
35.4
(1 3/8")
40 (1 5/8" )
37 (1 1/2" )
2
(1/16")
3
(1/8")
8 (5/16")
35
(1 3/8")
X (less than
panel thickness)
35
(1 3/8")
EXTERNAL MOUNTING INTERNAL MOUNTING

516-576-0295 | www.boasecure.com
5
national service providers
#69-EFL-3-304 LOCK
Without door status contact
#69-EFL-3-305 LOCK
With door status contact
Features:
— Slam function.
— Fail secure.
— Flat design allows for mounting beneath or beside drawers.
— Electromotive locking mechanism cannot be influenced by
magnetic fields.
— Integrated contact “Lock closed/open”.
— Optional: Additional contact “locking piece engaged” for
door status monitoring.
— Mount with 2x #6 Flat Head screws (not incuded).
Specifications:
Voltage required: 12VDC ± 10% (not polarity sensitive)
Current consumption
Continuous: 10 mA
Peak: 100 mA for < 40 mS
Duty cycle rating: Continuous duty (no time limit)
Heat generated: 0.12 Watt
Temperature range: 4 °C - 49 °C (40 °F - 120 °F)
20%~95% RH non condensing
Tensile load limit:
Locking bolt: 1000 N (225lbf.) holding strength
Min. door width: 200mm (7-7/8”)
Connections: Cables not included
Supplied with:
— (1x) electronic locking unit
— (1x) lock bolt (69-EFL3-BOLT-X)
CONCEALED CARD ACCESS
ELECTRONIC LOCKS
BOLT LOCK BODY
90
(3 17/32")
48
(1 29/32")
12
(1/2")
19
(3/4")
12
(1/2")
32
(1 1/4")
The mounting plate of the locking piece can be
installed against a funiture handle on the opposite side
(drilling distance: 32 mm (1-1/4”). Multiple EFL3 locks
can be connected to the FT120 in parallel (keyed alike).
Drill jig required to mount the lock. Marking gauge is
recommended to mount the locking pieces.
#69-FT200 PIEZO BUZZER
For acoustic indication of the locking status, for FT
200 furniture terminal, also suitable for customized
message alerts such as alarms

www.boasecure.com | 516-576-0295
6
national service providers
#69-MCL-1 MINI MAGNET LOCK
Mini design for cabinets.
Must be used in conjunction with the
#69-EXT-RLY external relay unit!
Features:
— High tensile load retention.
— Fail safe operation.
— Silent operation.
— Compact and lightweight.
— Flexible mounting options.
— Releases under pre-load.
Supplied with:
— (1x) electronic magnet
— (1x) amature plate
— L-bracket
— Male amp connection (2m Cable)
— Mounting hardware
— Instructions
Specifications:
Physical & performance at 25 °C (77 °F)
Weight: 400 g (14 oz)
Max. holding load: 364 N (80 lbf.)
Environmental
Operating temperature: -15 °C - 40 °C (5 °F - 104 °F)
Storage temperature: -55 °C - 85 °C (-67 °F - 185 °F)
Humidity (operating): 95% RH at 50 °C (+122 °F)
Non-combustible
Corrosion resistant finish
Fluid/Dust resistance
Electrical
Voltage required: 12VDC
Power consumption: < 1.2 W
Continuous Current: 100 mA
Amature plate should “float”
to allow alignment with magnet.
Z-bracket
Magnet
Armature
plate
Door
Door
frame
L-bracket
(notincluded)
70
(2 3/4")
1
9
(3/4")
8
(5/16")
62
(2 7/16")
31
(1 1/4")
32
(1 1/4")
Lock
Armature plate
CONCEALED CARD ACCESS
ELECTRONIC LOCKS

516-576-0295 | www.boasecure.com
7
national service providers
ELECTRONIC LOCKING SYSTEM
ACCESSORIES
#69-FT120-MLA6
Multi-Lock Adapter
Enables the user to connect up to 6 EFL3s
Features:
— Easy wiring of the locks
— Modular connection of the MLA6 to a FT 120 V2 with cable
237.56.340 (included)
— Potential free clamp terminal delivers lock status signal
— Status of the monitoring contacts is available for third party
applications such as additional alarm, messages, etc.
— No wiring required to route the EFL3 monitor contacts
to the FT 120 V2
Specifications:
Housing dimensions: 136 x 42 x 22 mm
4 x 35 mm or 4 x 55 mm screws
(5 3/8” x 1 5/8” x 7/8”)
Connection from EFL3 lock: RJ10
Connection to FT120/B V2: Molex
Contact rating: 24V, 1A max.
Temperature Rnage: 0 to 50°C (+32° to +122°F)

www.boasecure.com | 516-576-0295
8
national service providers
#69-TRN-12VDC-2.5A
Power Supply
#69-EXT-RELAY
External relay unit
Use in conjunction with FT120
to control MCL1 mag units.
Features:
— Protected from damage if the output wiring is shorted
Supplied with:
— (1x) power supply
— AMP socket and 72” primary cord
Specifications:
Housing dimensions: 108 x 58 x 30 mm
(4-1/4” x 2-9/32” x 1-3/16”)
AC input voltage: 120 V ± 15%, 47 - 63 HZ
AC input current: 0.6 A
DC voltage output: 12 VDC ± 5%
Output current range: 0 - 2.5 A
Operating temp. range: 0 °C - 40 °C (32 °F - 140 °F)
Capacity: max. 50 EFL1 locks
ELECTRONIC LOCKING SYSTEM
ACCESSORIES
Powered switches reduce lock capacity. The
in-line power supplies are not provided with
mounting tabs. They are best placed on a
protected shelf or trough.
Alternate central power options for large projects
in battery back-up power supplies.

516-576-0295 | www.boasecure.com
9
national service providers
ELECTRONIC LOCKING SYSTEM
ACCESSORIES
#69-EFL3-CBL-1M (1 M / 39-3/8”)
#69-EFL3-CBL-3M (3 M / 118”)
#69-EFL3-CBL-5M (5 M / 196-3/4”)
Cables for EFL3(C)
#69-EXT-CBL-1M (1 M / 39-3/8”)
#69-EXT-CBL-2M (2 M / 78-3/4”)
#69-EXT-CBL-5M (5 M / 196-3/4”)
#69-EXT-CBL-10M (10 M / 393-3/4”)
Extension Cables
— Used between components on the secondary side (low-voltage side)
to the Power Supply.
— 5 and 10 meter extension cables are only for use with locking systems.
#69-DIST-6
Distribution Block 1:6
— Allows up to 6 locks to be connected to one output.
— One male plug wired to 6 female caps.
— For additional locks, a second block can be plugged into one of
the caps of the first block (adding 5 locks).
— This process can be repeated as long as the current ratings system,
the power supply, and control device (switch) are not exceeded.

www.boasecure.com | 516-576-0295
10
national service providers
#69-KEY-TAG-GRY-USER
#69-KEY-TAG-WH-USER
key tags
#69-KEY-TAG-GRN-ADD
#69-KEY-TAG-RD-DEL
Level 1 programming
Add (green) and Delete (red) RFID key tags
#69-KEY CARD-USER-WHITE
#69-KEY CARD-ADD USER-GREEN
#69-KEY CARD-DELETE USER-RED
Features:
— Contactless data transmission.
— Read/write transponder.
— No batteries required.
— Insensitive to magnetism,
mechanical vibrations,
humidity, moisture, & dust.
— Reuseable.
— Forgery proof.
— Water-resistant
— 4 Dialock® segments
— WxHxD: 28 x 56 x 1.7 mm (5/8” x 2-1/4” x 1/16”)
EFL SYSTEMS DIALOCK®
RFID KEYS TAG-IT™

516-576-0295 | www.boasecure.com
11
national service providers
#69-WT210 CONTROLLER / READER
Wall terminal reader unit and controller in one compact unit.
Allows for installation in flush-mount sockets or cavity wall boxes.
Features:
— Red/green LEDs for indication of locking and unlocking
— Forms a complete offline access point in combination with
an electric strike or mag lock.
— Made from plastic, anthracite/silver color.
ELECTRONIC LOCKING SYSTEM
CONTROLLER / READER UNIT

www.boasecure.com | 516-576-0295
12
national service providers
ELECTRONIC LOCKING SYSTEM
PROGRAMMING
FIRST TIME POWER-UP PROGRAMMING:
1. Plug-in Power.
2. When the Reader Flashes Green, Introduce the Green (add)Card.
3. When the Reader Flashes Red, Introduce the Red (delete) Card.
STOP!
PROGRAMMING A USER CARD:
1. Now, present the Green (add) Card to the Reader.
2. When the Reader Flashes Green, introduce the White User Card.
STOP! Now Test the Function with a User Key.
CHANGING THE FT 120 OPEN TIME
The steps below assume that the Green (add) key, Red (delete) key, and User keys have been programmed in the FT 120 unit.
If not, then this step is required before changing the open time.
CYCLE MODE
Out of the box the FT 120 is set for an open time of 3 seconds (default). When a valid key is presented to the antenna the FT
120 will keep the lock open for 3 seconds and automatically relock. To change the default time the steps below will require
the Green (add) programming key and Open Time #74 Transponder. The open time can be adjusted from 1 to 25 (seconds).
1. Present the Open Time #74 transponder to the antenna. The red LED will start flashing.
2. Immediately present the Green key and an audible beep will be heard. Hold the
3. key in place for the desired open time by counting from 1 to 25 seconds.
4. Remove Green key when the desired open time is reach.
5. Test open time with a valid user key.
TOGGLE MODE
Out of the box the FT 120 is set for Cycle mode (if required see Cycle mode above). In Toggle mode a valid key is presented,
and the lock opens. A valid key must be presented again; to relock the lock. To configure this mode the steps below will
require the Green (add) programming key and Open Time #74 Transponder.
1. Present the Open Time #74 transponder to the antenna. The red LED will start flashing.
2. Immediately present the Green key and an audible beep will be heard.
3. Remove Green key immediately after the beep.
4. Test toggle mode with a valid user key.

516-576-0295 | www.boasecure.com
13
national service providers
ELECTRONIC LOCKING SYSTEM
PROGRAMMING
MULTI PROGRAM (7A) – SIMPLE PROGRAMMING:
This procedure allows you to create multi Green (add) and Red (delete) programming keys for simple programming.
To proceed with this function at least one Green (add) and one Red (delete) key must already be enrolled into
the lock or controller. The Green (add) key already enrolled will serve as the “authorization” key.
Steps below will require the following keys:
· Multi Program (7A)
· Pre-enrolled green / add – (used to authorize)
· Additional green / add
· Additional red / delete
1. Present and remove the Multi Program (7A). Both green and red LED will flash.
2. Immediately present and remove pre-enrolled green / add to authorize. Green
1. LED will flash.
2. Immediately present and remove additional green / add key(s)
3. When all green / add keys have been programmed the flashing green LED will
4. timeout after about 4-5 seconds and immediately start flashing red.
5. Immediately present and remove additional red /delete key(s)
6. When all red / delete keys have been programmed the flashing red LED will
7. timeout after about 4-5 seconds and return to a solid red.
8. Programming is complete.
All programming keys and any unused user key should be stored in a safe location.
INSTALLER NOTE: Since the wire color may change the clip end is generally positive.

www.boasecure.com | 516-576-0295
14
national service providers
ELECTRONIC LOCKING SYSTEM
WALL UNIT WIRING DIAGRAM
REX
REQUEST TO EXIT
MOTION DETECTOR
(above door, inside)
ACCESS CONTROL
READER
ELECTRIC STRIKE
DOOR RELEASE
OPTION A
ELECTROMAGNET
DOOR RELEASE
OPTION B

516-576-0295 | www.boasecure.com
15
national service providers
ELECTRONIC LOCKING SYSTEM
WIRING DIAGRAMS
BASIC WIRING DIAGRAMS FOR EFL3 LOCKS
ReadeR
ReadeR
ONE LOCK SETUP
MULTIPLE LOCK SETUP

www.boasecure.com | 516-576-0295
16
national service providers
ELECTRONIC LOCKING SYSTEM
STRIKE
#69-STRIKE-ELEC-12/24-FS/NFS
Electric strike for wood and metal frames. Available in various finishes.
The 4500C series electric strike is designed for installation in 2”
UL 10C fire-rated frames with 1/2” drywall penetration. The 4500C
features a low profile 1-3/8” depth, heavy-duty stainless steel
construction. Its strength is derived from a unique keeper pin locking
design, enabling the 4500C to exceed the ratings of the frame, door
and locking hardware.
The 4500C includes a 4500 strike body and two interchangeable
faceplates to accommodate most cylindrical and mortise latch bolts
(without deadbolts).
Electrical:
— .24 Amps at 12 VDC/VAC
— .12 Amps at 24 VDC/VAC
— DC continuous duty/AC intermittent duty only
Certifications:
— UL 10C fire rated, 3-hour (fail secure only)
— CAN4-S104 (ULC-S104) fire door conformant
— UL 1034 burglary resistant listed
— UL 294 listed
— ANSI/BHMA A156.31, Grade 1 (#E09321, #E09322, #E09323)
— NFPA-252 fire door conformant
— ASTM-E152 fire door conformant
— California Fire Marshall Listed
Standard Features:
— Stainless steel construction
— Tamper resistant
— Static strength 1,500 lbs.
— Dynamic strength 100 ft-lbs.
— Endurance 1,000,000 cycles
— Field selectable fail safe/fail secure
— Dual voltage 12 or 24 VAC/VDC
— Two faceplates provided to accommodate
a variety of locksets
— Non-handed
— Internally mounted solenoid
— Accommodates up to a 3/4” latch bolt
— Strike body depth 1-3/8”
— Plug-in connector
— Trim enhancer
— Full keeper shims for horizontal adjustment
— Five-year limited warranty
* Parenthesis dimensions are in mm.

516-576-0295 | www.boasecure.com
17
national service providers
ELECTRONIC LOCKING SYSTEM
MAGS
#69-MAG-8371-SS
9-3/8”W x 1-7/8”H x 1”D (238mm x 48mm x 25mm)
Includes 3/16” (5mm) mounting bracket Armature Plate: 7-1/4”W x 1-1/2”H x 1/2”D (185mm x 38mm x 13mm)
Strength: Up to 750lbf Holding Force
Warranty: Lifetime Limited Warranty
Mode: Fail-Safe
Fire-Rated: CAN/ULC S104 UL 10C 1-Hour
Monitoring: Optional Door Status Sensor (DSS)/
Security Condition Sensor (SCS)
Available
These Surface Mag® locks are designed with a 1-7/8” width to keep
undersized openings within code. These locks are ideal solutions for
traffic control on narrow-style interior or perimeter doors. The RCI 8371
Surface Mag® is for single out-swinging doors. Energy: 520mA Field-
Selectable 12/24VDC (Max at 12VDC for 8371, 1.04A for 8372)
— Designed to overcome residual magnetism
— Hardened steel armature nut
— Includes 3/8” (9.5mm) armature plate
— Available in Brushed Anodized Aluminum (28) or
Brushed Anodized Dark Bronze (40) finish
— UL 294 Special Locking Arrangement Component (6th Edition)
— UL 10C Auxiliary Locks Listed for fire doors rated up to 1-hour
— CAN/ULC S104 Auxiliary Locks Listed for fire doors rated up to 1-hour
— California State Fire Marshal Listed (CSFM: 3774-2127:0100)

www.boasecure.com | 516-576-0295
18
national service providers
ELECTRONIC LOCKING SYSTEM
MAGS
#69-MAG-SHEAR
Securitron SAM Shear Aligning Magnalock
1200 lbs. [544 kg] holding force Shear Aligning Magnalock mounts
fully concealed into wood, steel or aluminum doors. SAM can also
be installed in any position on the door - top, side or bottom and is
ideal for swing through and sliding doors.
Product Features
Features:
— Patented instant release circuit - no residual magnetism
— Fully sealed electronics - tamper proof and weatherproof
— Mounted using steel machine screws
— Architectural brushed stainless steel finish (US32D/630)
— All ferrous metal surfaces plated to MIL specification
— Hardware accessories available to configure any opening
type including mounting brackets
— Automatic dual voltage - no field adjustment required
— Lock options include BondSTAT magnetic bond sensor
and integrated door position switch
— UL Listed
— MagnaCare® lifetime replacement, no fault warranty
Specification:
— Current Draw and Voltage: 320mA at 12VDC; 170mA at 24VDC
— O L 10C Listed
— UL/cUL GWXT.R13976 /GWXT7.R13976
— UL/cUL FWAX7.SA6635
— UL/cUL FWAX2.SA6635 /FWAX8.SA6635
— UL/cUL ALVY.BP7041
— UL Certificate of Compliance (CoC)
— CSFM 3774-0923:0101
— CSFM 3774-0923:0102
— CSFM 3774-0923:0103
— CAN4-S104, CAN/ ULC-S533 Listed
— ANSI/UL 294 Listed
— ANSI/BHMA A156.23, Grade 1;E08561-1000, E08571-1000,
E08581-1000, E08591-1000
— CSFM - California State Fire Marshal Approved
— CE:EN 50081-1(92), EN 61000-6-2(99) Approved
— Operating Temperature: -40 to +140F [-40 to +60C]
* Parenthesis dimensions are in mm.

516-576-0295 | www.boasecure.com
19
national service providers
ELECTRONIC LOCKING SYSTEM
MOTION DETECTOR LOCK RELEASE
#69-RTE-MOTION
For use in request-to-exit (REX) applications.
Complies with Environmental Class II (EN50130-5)
Provides PIR 2.4 m x 3 m (8 ft x 10 ft) coverage, timers,
door monitor with sounder alert, and pointable coverage.
Operating Temperature: -29°C to +49°C (-20°F to +120°F) For UL Certificated installations,
0°C to +49°C (+32°F to +120°F)
Radio Frequency Interference
(RFI) Immunity: No alarm or setup on critical frequencies in the range from 26 MHz to 1000 MHz at 50 V/m
Dimensions: 4.5 cm x 17.1cm x 4.4 cm (1.80 in. x 6.75 in. x 1.75 in.)
Material: High impact ABS plastic enclosure
Power Loss Default: Programmable fail-safe or fail-secure modes.
Timer: Programmable reset accumulative or non-reset counting mode.
Current Draw: 8 mA nominal standby current, 39 mA at 12 VDC in alarm
Voltage: 12 VAC or VDC to 30 VAC or VDC
Alarm Output: Two Form C relay contacts each rated 1 A at 30 VAC or VDC for resistive loads
Indicators: 1 activation LED

www.boasecure.com | 516-576-0295
20
national service providers
ELECTRONIC LOCKING SYSTEM
REQUEST TO EXIT BUTTON
#69-RTE-BUTTON
991 Pneumatic Time Delay Exit Pushbutton
— Red, 1-5/8” (41mm) diameter button with engraved
“PUSH TO EXIT”
— Tamper-resistant, cannot be burned or pried off
— Quickly mounts to single gang box (Standard) or
narrow-stile door frames (Narrow)
— 0-45 seconds adjustable time delay
— Made in the USA
— Brushed Stainless Steel (32D) faceplate
— 2 Year Limited Warranty
— Standard: 2-3/4”W x 4-1/2”H (70mm x 114mm)
— Narrow: 1-3/4”W x 4-1/2”H (41mm x 114mm)
— UL 508 recognized microswitch
— Listed to CSA C22.2 NO. 14-10