BodiMetrics O2 Vibe User manual

O2Vibe Fitness &
Sleep Monitor
Quick Start Guide
BodiMetrics LLC
1601 N. Sepulveda Blvd., Suite 839
Manhattan Beach, California 90266
www.BodiMetrics.com
Toll Free: [phone]
The O2Vibe has two modes: Sleep and Fitness. Both
modes offer continuous blood oxygen saturation (SpO2)
and heart rate tracking. Both modes also have
customizable vibrating alerts to remind you to walk to
meet your step goals or wake you if your SpO2 drops
below the threshold you set. The O2Vibe tracks SpO2,
Heart Rate, and Motion during Sleep and SpO2, Heart Rate
and Steps during light exercise to help you live a healthy
lifestyle
This product is not a medical device and should
not be used to diagnose or treat any medical
condition.
Do not use this device with MRI equipment as it
contains strong ferromagnetic materials.
Package Contents
(1) O2Vibe Main Unit
(1) USB Soft FingerRing Sensor
(1) USB Charging Cable (Micro D)
(1) Quick Start Guide
Using O2Vibe
Please charge the battery before the first use
Connect the device to the USB port of your personal
computer (PC) using the provided USB Charging Cable
until fully charged; typically takes less than 2 hours to fully
charge.
Power ON/OFF Process
Press and hold the button on the side for 1 second to
power ON the device, 3 seconds to power OFF the device.
Download & Install O2Vibe Mobile Application
Search Apple (iOS devices) or Google (Android devices)
Stores for free O2Vibe application and download to your
mobile phone; iPad or Tablet.
How It Works
1. Put your O2Vibe on your wrist.
2. Connect the finger ring sensor to the connector on the
device.
3. Slide the ring sensor onto your index finger or thumb as
pictured.
4. Press the button to turn on the device; then press button
again to change the operation mode to Sleep or Fitness
you desire. After a few seconds, your readings will begin
appearing on the device screen.
About device screens
SpO2 Oxygen saturation
Heart rate
Insert USB Thumb Sensor into O2Vibe port
Slide your finger into the sensor as pictured
Sleep Score is a score from 0 to 100 and based on the
number of times and length of time you SpO2 dropped
below the threshold you set. The second value is the
number of times SpO2 dropped below that threshold
during your night of sleep.
Operation Mode Navigation
The O2Vibe has two operation modes, Sleep Mode and
Fitness Mode, pressing the button allows you to switch
between this two modes within seconds after power is
turned ON.
Sleep Mode
Screen will be dark until you Press button on the side of the
O2Vibe to wake up the application to show status of
measurement and results. The screen will go dark after a
few seconds of no operation.
Fitness Mode
Screen is Always On; Press the button to change display to
show various measurements and results including steps,
HR and SpO2 metrics.
Sleep Score
MR

To Synch Your O2Vibe Device with Mobile App
1. Turn on your O2 Vibe by pressing button on side and
look for Bluetooth icon on your device.
2. Open the O2Vibe application on your mobile phone,
iPad or Tablet and choose your device listed to establish
a Bluetooth connection.
3. Your new records will show updating on your mobile
application.
To View Results and Settings on Mobile App
You can switch on/off vibration, adjust intensity and
threshold (SpO2) of vibration in the app. After each
measurement or when you turn on the device, the results
can be provided in the APP on your phone via Bluetooth.
Turn on the Bluetooth of your phone, enter the O2 Vibe
APP and choose your device on the screen; your phone will
connect automatically.
Note: The O2 Vibe device’s Bluetooth will automatically
turn on within the first 2 minutes. Or it will turn on
automatically after the measurement completes until you
power OFF.
To Upgrade O2Vibe Device Software
1. Turn ON your O2Vibe device.
2. Open the O2Vibe application on your mobile phone,
iPad or Tablet and choose your device listed to establish
a Bluetooth connection.
3. Touch Device -> Device update -> Update in your O2
Vibe application and wait until update is complete.
How to contact us?
BodiMetrics
1601 N Sepulveda Blvd, Suite 839
Manhattan Beach, CA 90266 USA
www.BodiMetrics.com
Toll Free: [phone]
Email: [email protected]
In Fitness Mode, you can press the button on the side of
the device to change screen to show the number of steps
you have taken.
Cloud
1. Touch the Cloud icon in the upper right-hand corner of
the app, and then create an account.
2. Sign into the O2Vibe APP, fill in your account and user
profile.
3. Data can be synced with the Cloud once you set up your
profile. To share data or records you must set up an
account under your profile.
Troubleshooting
Specifications
About O2 Vibe Screens
When you turn on the device, screen shows the time,
fitness or sleep mode, and battery capacity.
Four seconds later it shows measurement results if you
don’t perform any action. If there is no measurement
results, the pulse rate symbol will flash.
In Sleep Mode, if the Finger Sensor is disconnected from
the device, or the Sensor slips from your finger, it starts
countdown from 10 seconds.
If you don’t reposition the sensor or insert the plug into the
device in 10 seconds, it will stop measuring automatically
and show the O2 score and how many times the SpO2
dropped below the threshold. Two minutes later it will
automatically power off.
In Fitness Mode if the Finger Sensor is disconnected from
the device, or the Sensor slips from your finger, it starts
countdown from 30 seconds.
If you don’t reposition the sensor or insert the plug into the
device in 10 seconds, it will stop measuring automatically
and show the O2 score and how many times the SpO2
dropped below the threshold. Two minutes later it will
automatically power off
Fitness ModeSleep Mode