Bodum 05-3000-IM01 User manual

WARRANTY CERTIFICATE. 3000 SANTOS COFFEE MAKER
GARANTIESCHEIN. 3000 SANTOS KAFFEEMASCHINE
CERTIFICAT DE GARANTIE. CAFETIÈRE 3000 SANTOS
GARANTIBEVIS. 3000 SANTOS KAFFEMASKINE
Design: Carsten Jørgensen
Business stamp
Firmenstempel
Cachet de la
société
Firmastempel
Date
Datum
Date
Dato
3000 SANTOS
www.bodum.com
SANTOS
Coffee MakerKaffeemaschine
Cafetière Kaffemaskine
Instruction for use
ENGLISH
Gebrauchsanweisung
DEUTSCH
Mode d’emploi
FRANÇAIS
Brugsanvisning
DANSK
05-3000-IM01
1.5 l
Coffee Maker
Kaffeemaschine
Cafetière
Kaffemaskine

OPERATING PRINCIPLE
The water is heated in the jug. The steam generated forces the
water through the riser tube and into the funnel. The gentle heating
of the ground coffee enhances the coffee’s beneficial qualities.
The coffee is brewed at the ideal temperature and develops its full
aroma. Once the correct brewing time has elapsed, the heating ele-
ment switches off and the coffee flows back into the jug – it is now
ready to serve.
Brewing 10 cups takes approximately 11 minutes, depending
mainly on the coarseness of the coffee. The finer the grind, the
longer the brewing time.
Coffee can be kept warm in the jug for 2 hours after brewing.
The start time for automatic coffee brewing can be programmed.
Intended use. The "Santos" coffee maker is designed only for
brewing coffee with ground coffee beans. Coarse or finely ground
coffee may be used. BODUM®recommends using a grind suitable
for filter coffee. Instant coffee is not suitable.
Warning! Never use the unit to boil water!
Never heat up cold, brewed coffee.
The coffee maker is intended exclusively for household use and
may therefore be operated only in the household.
OPERATING PRINCIPLE
2
The "Santos" coffee
maker enables the
rapid brewing of
superb coffee. With
the special process
developed by
BODUM®, the coffee
retains its full aroma
– a fact that coffee
connoisseurs are
bound to appreciate.
OPERATING PRINCIPLE
3
1Funnel cover
2Filter
3Funnel
4Seal
5Swing
6Lid of jug
7Jug
8Level indicator with MIN
and MAX filling marks
9Power base
10 Cable storage
11 Programming display
12 ON/OFF button
13 AUTO button
14 Hours button
15 Minutes button
16 Time display
Parts marked with this symbol
can be cleaned in the dish-
washer.
1
2
3
4
7
8
6
10
9
5
11
14
12
13 15
16

SAFETY INSTRUCTIONS
WHAT TO DO:
SAFETY INSTRUCTIONS
4
For situations not
covered by these
instructions, please
contact BODUM®for
additional informa-
tion regarding safe
handling of this unit.
Please keep these
instructions in a safe
place!
SAFETY INSTRUCTIONS
5
SAFETY
INSTRUCTIONS:
Please read this
information carefully.
It contains important
instructions for use,
safe handling and
care of the unit.
Please also observe
the instructions in
the "Cleaning & Lime
Removal" section on
page 12.
Use the unit
exclusively in
the household
and only for
the intended
purpose (see
"Intended
use").
Damaged units
should be
taken immedi-
ately to the
nearest
BODUM®SHOP
or authorized
Bodum®dealer
for repairs.
Only operate
the unit with
the rated volt-
age indicated
(see label on
base of unit).
Always place
the unit on a
dry, stable and
horizontal sur-
face.
Always allow
the unit to cool
down before
cleaning.
Switch off the
unit before
removing the
plug from the
electrical out-
let. Always pull
only on the
plug and never
on the cable.

SAFETY INSTRUCTIONS
WHAT YOU MUST NOT DO:
SAFETY INSTRUCTIONS
6
SAFETY INSTRUCTIONS
7
Do not allow
children to oper-
ate the unit
without supervi-
sion. Children
do not recog-
nize hazards.
The power base
and parts of the
jug become very
hot during oper-
ation! Lift the
jug only by the
handle; do not
touch hot sur-
faces!
Under no cir-
cumstances
should you
operate units in
which parts are
defective or
missing.
Do not place
the unit or
parts near a
stove or oven or
in a microwave
oven.
To protect
against fire, el-
ectric shock or
injuries, never
immerse the
cable, plug or
power base in
liquids or allow
them to come
into contact
with liquids.
Never open the
power base or
the bottom of
the jug! Have
repairs per-
formed only
by authorized
experts.
Do not crush
the cable or
lead it around
corners or
sharp edges!
Store excess
cable in the
base of the
unit.
Operate the unit
with BODUM®
original parts
only. BODUM®
decline any lia-
bility or guaran-
tee if the unit is
fitted with any
other parts.

COFFEE PREPARATION
9
COFFEE PREPARATION
Before first use. Every unit is tes-
ted and carefully packed before
shipping.
Nevertheless, please check be-
fore use that the unit is complete
and is not damaged anywhere.
Before the first brewing. Flush the
unit without coffee. To do this, fill
the jug with water, boil and pour
out.
Always make sure that the jug is
filled with enough water for brew-
ing coffee. The MIN mark on the
level indicator must always be
reached, i.e. always fill with at
least enough water for 4 cups
(0,5l).
COFFEE PREPARATION
8
1. Pull the cable out of the
power base for at least 2/3
of its length.
5. Place the jug on the
power base.
2. Plug in the cable, leading
it as directly as possible.
6. Turn the funnel around
on its axis to fit it on the
jug. Note: Wetting the seal
facilitates fitting of the fun-
nel.
3. Fill the jug with the
desired amount of cold
water (approx. 1.5 dl per
cup).
7. Ensure that the funnel
sits securely on the jug and
that the seal is evenly com-
pressed.
4. The MIN mark on the
level indicator must be
reached!
8. Place the filter in the fun-
nel.

COFFEE PREPARATION
11
COFFEE PREPARATION
10
9. Ensure that the filter
snaps audibly in position!
15. Turn the swing outwards
from the power base.
10. Place the desired
amount of ground coffee in
the funnel. We recommend
7g per cup. (The supplied
scoop holds 7g).
11. Place the cover on the
funnel.
16. Hold the jug firmly by
the handle and tip the fun-
nel aside slightly.
Warning: Hot parts! Lift the
jug only by the handle.
12. Press the ON button.
Caution: The unit will
become hot and steam may
escape from the openings
in the cover.
17. Place the funnel on the
funnel holder on the power
base, or else in the sink.
13. As soon as there is no
water left in the funnel, the
coffee is ready.
18. The coffee can now be
enjoyed.
14. A funnel holder is inte-
grated in the power base.
Press lightly on the swing.
19. If you place the jug back
on the power base within 10
minutes, the unit will remain
switched on and will keep
the coffee warm for 2 hours.

Warning! Allow all
parts to cool before
cleaning! The plas-
tics selected by
BODUM®are perfectly
suited for coffee
machines. Use only
water and mild deter-
gents for cleaning and
no scouring or aggres-
sive cleaning agents.
Warning! The power
base and the jug may
never be placed in
the dishwasher or
immersed in liquids!
Parts marked with
the symbol
can be cleaned in the
dishwasher.
LIME REMOVAL
LIME REMOVAL
13
CLEANING
CLEANING
12
Remove the cover from the funnel and dis-
card the coffee grounds.
Remove the filter from the funnel.
Rinse and clean the funnel and filter with
water.
Clean the jug with warm water and washing-
up liquid.
Warning: Do not immerse the jug in liq-
uids. Do not clean the jug under running
water.
If the “Santos” is frequently used, BODUM®
recommends replacing the filter plate
monthly. Filter plates are available at any
BODUM®SHOP or authorized BODUM®deal-
er. Loosen the screw in the filter and
replace the filter plate.
Coffee has a slightly descaling effect.
If lime deposits are only slight, it is suffi-
cient to leave a little coffee in the jug after
each brewing cycle over a period of 2-3
days.
We recommend the use of ordinary com-
mercial lime-removing agents for the regu-
lar removal of lime from the jug.
Please follow the instructions on the lime
remover.
Warning: Unplug the power base before
cleaning and do not immerse in liquids or
clean under running water.
Replace the cable in the storage area in
the base.
Remove the swing from the power power
base. Rinse the swing with water.

TIMER FUNCTIONS
15
The unit can be
switched on or off
at any time with
the ON/OFF button.
Coffee can also
be brewed without
the time being pro-
grammed.
Time-setting mode:
If you set the time
for the first time,
the time display
and the clock sym-
bol will flash.
If you change the
set time, the clock
symbol will flash.
If you do not press
any button for 5
seconds, the set
time is automati-
cally stored.
TIMER FUNCTIONS
Setting the time Changing the time
No times are set
and no automatic
functions are
active when the
unit is plugged in-
to the mains. The
following sections
describe in detail
how the times and
functions can be
set.
TIMER FUNCTIONS
14
The unit starts
automatically
in time-setting
mode and the
display flashes.
Press one of
the right-hand
buttons for 2
seconds.
Change hours
and minutes.
Wait until the
clock symbol
stops flashing.
Input the pres-
ent time in
hours and min-
utes.
Plug the unit
into the mains.
Turn on the unit
by pressing the
ON button.
If you do not
press any button
for 5 seconds, the
set time is auto-
matically stored.

Activate automatic start time. The unit switches on at the desired
time and coffee is prepared automatically. The AUTO lamp goes
out, the display ON appears, and the ON lamp is lit.
Once coffee has been prepared, the unit remains switched on for
2 hours. However, it can also be immediately switched off by hand.
If coffee is to be automatically prepared again the following day,
the automatic start time must be reactivated.
Coffee can always be brewed even if the automatic start time is
activated.
TIMER FUNCTIONS
17
Programming automatic start time. The start time for automatic
coffee brewing can be programmed as desired. The unit switches
on automatically at the desired (programmed) time, the brewing
process is started and coffee is prepared. The selected start time
is automatically activated after programming.
TIMER FUNCTIONS
16
Switch on the
unit and press
the AUTO but-
ton for 2 sec-
onds.
Input the
desired hour for
the automatic
start time.
Input the min-
utes for the
automatic start
time.
If you do not
press any button
for 5 seconds,
the set time is
automatically
stored.
Press the AUTO
button for 2
seconds.
The display
AUTO appears
and the AUTO
lamp is lit.
AUTO time-setting
mode:
If you set the
AUTO start time,
the AUTO lamp
and the AUTO sym-
bol will flash.
If you do not press
any button for 5
seconds, the set
time is automati-
cally stored.

SERVICE & GUARANTEE
19
SERVICE & GUARANTEE CONDITIONS
All BODUM®products are made of high-quality, durable materials.
However, should parts require replacement, please contact one of
the following:
your BODUM®dealer - the BODUM®SHOP - the BODUM®representa-
tive in your country, or our home page at www.bodum.com.
Guarantee. BODUM®guarantees the "Santos" coffee maker for 2
years from date of purchase against material defects or malfunc-
tions which can be traced back to defects in manufacturing or
design.
Repair is free of charge provided all guarantee requirements are
fulfilled. No refunds can be made.
Guarantee requirements. The guarantee certificate must be com-
pletely filled out by the seller at the time of purchase.
Only agents authorized by BODUM®may perform guarantee ser-
vices.
BODUM®makes no guarantee for damage which can be attributed
to use for unintended purposes, incorrect handling, normal wear
and tear, defective or incorrect maintenance or service work, incor-
rect operation or manipulation by unauthorized persons.
TECHNICAL DATA:
Mains voltage:
230V 50Hz or
120V 60Hz
Rated power:
1200W
Cable length exten-
dible to 80cm
Net contents:
0.5 – 1.5 liters
17 – 50 ounces
TIMER FUNCTIONS
18
Deactivation of automatic start time
If the unit is
switched on,
the display ON
appears, and
the ON lamp is
lit.
The automatic
start time is
then no longer
active.
AUTO time-setting
mode:
If you set the
automatic start
time the AUTO
lamp and the
AUTO symbol will
flash.
Press the AUTO
button for 2
seconds.