Bolia Vadis User manual

Pia Würtz 19.02.2015
Vadis

As wall materials vary, raw plugs and screws for fixing to wall are not included.
For advice on suitable raw plugs, contact your local hardware store.
Tools and parts not included How to:
1: Mark with a pencil where you want the product.
For this setup you only need to use the holes marked with a circle.
Make sure to be very precise
2: Drill the 7 holes.
3: Place the right type and size of plugs in the hole. Fasten the screws
leaving af small space between wall surface and screw head
(like shown on the drawing).
Mount the shelves on the screws.The products are handmade and slight variations in the location of the mounting holes can occur.
Cut out the template. Very important: Make sure the template matches your product and adjust it if necessary.
Place the templates on the wall.
We recommend 5 mm space between the shelves.
3
2
Max. load: 3 kg
1
2
3
3
2
1
1
2
3
This way down
This way down
This way down

Paper size: A3
1
Paper size: A3
This way down

2
This way down
Paper size: A3

3
Paper size: A3
This way down

1
This way down
Paper size: A4

2
This way down
Paper size: A4

3
Paper size: A4
This way down