BoLiving 519793 User manual

2020-07-03Rev 1 -
Java TV Unit
519793

! Read instructions carefully. Check no parts are missing.
! Assemble the furniture on a soft level surface to avoid damaging the furniture or your floor.
! Carefully identify each component, especially those that are similar.
! The most common mistake is getting things back to front.
! Separate and identify each component from the hardware pack and rest each one in it's
proper location before fastening.
! We recommend furniture be assembled near where they will be placed, to avoid moving the
product unnecessarily once assembled.
! If there is a need to move the furniture, please remove all loose items and have extra hands
to help lift the furniture to the desired location. Dragging the furniture will damage both the
furniture and the floor.
! Regularly check and re-tighten (if necessary) all bolts on furniture that you have assembled
yourself.
WARNING
Keep these instructions for future reference
ALLOW 60 MIN
Page 2
Unit 1, Ubique Business Park, March Way, Battlefield, Shrewsbury, SY1 3JE
2 Persons Required
Tools Required
DO NOT USE ON PRODUCT
Rattan
Rattan is a natural material that will expand and contract with changes in the surrounding humidity
and temperature. Each rattan piece in the furniture may also respond to these changes to a different
degree. Once humidity and temperature return to normal, each rattan piece would also return to its
original shape. This is a natural phenomenon and not a defect.

Parts list
1 x Top Panel (P1)
1 x Bottom Panel (P2)
2 x Side Panels (P3)
1 x Divider Panel (P4)
1 x Back Panel (P5)
1 x Door (P6)
1 x Door (P7)
1 x Big Middle Leg (P8)
1 x Small Middle Leg (P9)
4 x Legs (P10)
Page 3
Top Panel (P1)
Bottom Panel (P2)
Back Panel (P5)
Side
Panel
(P3)
Side
Panel
(P3)
Divider
Panel
(P4)
Leg (P10)
Leg (P10)
Leg (P10)
Leg (P10)
Big Middle
Leg (P8)
Small Middle
Leg (P9)
Door (P6)
Door (P7)

Page 4
Hardware Pack
15 x Cam Bolts
(H1)
15 x Cam
Nuts (H2)
14 x Dowels
30mm (H3)
2 x Handles
(H4)
22 x Screws
16mm (H6)
8 x Flat Washers
(H9)
8 x Spring
Washers (H10)
4 x Screws
28mm (H11)
1 x Allen Key
(H12)
4 x Felt Feet
(H5)
8 x Bolts
55mm (H8)
6 x Back Panel
Connectors (H7)
1 x Adjustable
Foot (H14)
4 x Guides
(H16)
1 x Screw
38mm (H13)
4 x Rollers
(H15)

Step 1
Page 5
You will need
Attach 1 x felt foot (H5) onto each leg (P10) as shown.
Step 2
You will need
8 x Bolts
55mm (H8)
Attach each leg (P10) onto bottom panel (P2), using 2 x bolts (H8), 2 x flat washers (H9)
and 2 x spring washers (H10). Tighten the bolts with allen key (H12).
Screw 3 x cam bolts (H1) into bottom panel (P2), using a phillips head screwdriver.
4 x Felt Feet
(H5)
X4
H5
8 x Flat
Washers (H9)
8 x Spring
Washers (H10)
1 x Allen Key
(H12)
(P10)
H12
H8
H10
H9
(P2)
(P10)
3 x Cam Bolts
(H1)
Phillips Head
Screwdriver
(P10)
(P10)
(P10)
(P10)
H8
H8
H1
H1
(P2)

Step 3
Page 6
You will need
Screw 1 x adjustable foot (H14) to big middle leg (P8).
Insert 2 x dowels (H3) into middle legs (P8) & (P9).
Use a mallet to gently tap the dowels into place if needed.
Attach small middle leg (P9) to big middle leg (P8)
with 1 x screw (H13), using a phillips head screwdriver.
1 x Screw
38mm (H13)
Phillips Head
Screwdriver
H3
Mallet
2 x Dowels
30mm (H3)
H3
H14
H13
(P8)
(P8)
(P9) (P9)
1 x Adjustable
Foot (H14)
Flat Head
Screwdriver
3 x Cam
Nuts (H2)
Step 4
You will need
Position middle legs (P8) & (P9) onto bottom panel (P2).
Insert 3 x cam nuts (H2) into middle legs (P8) & (P9).
Rotate the cam nuts so the arrows pointing towards
the incoming cam bolts and turn clockwise to lock with
a flat head screwdriver.
Turn the assembled unit over.
(P2)
H2 H2
(P8)
(P9)

Step 5
Page 7
You will need
Screw 6 x cam bolts (H1)
into bottom panel (P2),
using a phillips head screwdriver.
6 x Cam Bolts
(H1)
Phillips Head
Screwdriver
Step 6
You will need
Step 7
You will need
Insert 4 x dowels (H3) into
divider panel (P4) as shown.
Insert 4 x dowels (H3)
into each side panel (P3) as shown.
Use a mallet to gently tap the dowels into place if needed.
(P2)
H1
6 x Cam Bolts
(H1)
Phillips Head
Screwdriver
Screw 6 x cam bolts (H1) into top panel (P1),
using a phillips head screwdriver.
(P1)
H1
H1
H1
H1
H1
(P3)
12 x Dowels
30mm (H3) Mallet
H3
H3
H3
H3
H1
H1
H1
H1
H1
H1
H3
H3
H3
H3
(P4)
X2

Step 8
Page 8
You will need
Position panels (P3) & (P4) onto bottom panel (P2) as shown.
Insert 6 x cam nuts (H2) into panels (P3) & (P4),
turn clockwise to lock using a flat head screwdriver.
Step 9
Slide back panel (P5) into the grooves in panels (P2) and (P3).
Flat Head
Screwdriver
6 x Cam
Nuts (H2)
(P3)
H2
(P3)
(P4)
H2
H2
H2
H2
(P2)
(P5)
Laminated
edge
(P3)
(P4)
(P3)
(P2)

Step 10
Page 9
You will need
Position top panel (P1) onto panels (P3), (P4) & (P5) as shown.
Make sure the groove in top panel (P1) is on the same side as the side panel (P3).
Insert 6 x cam nuts (H2) into panels (P3) and (P4), using a flat head screwdriver
turn clockwise to lock.
Step 11
You will need
Flat Head
Screwdriver
6 x Cam
Nuts (H2)
(P3) (P4)
(P3)
(P1)
H2
H2
H2
H2
H2
H2 (P5)
If necessary, gently adjust the top panel (P1) sideways in either direction
until XX and YY are equal.
Holding it in place, fix 6 x back panel connectors (H7) to assembled unit
with 6 x screws (H6) as shown, using a phillips head screwdriver.
Phillips Head
Screwdriver
6 x Screws
16mm (H6)
6 x Back Panel
Connectors (H7)
H7
H7
H7
H7
H7
H7
(P5)
(P1)
(P1)
XX=YY
XX
YY
XX
YY
H7 H7
H6 (P5)
(P1)
(P5)
(P1)

Step 12
Page 10
You will need
Attach 2 x guides (H16) to each door (P6) and (P7) with 4 x screws (H6),
using a phillips head screwdriver as shown.
Attach 2 x rollers (H15) to each door (P6) and (P7) with 4 x screws (H6),
using a phillips head screwdriver as shown.
4 x Guides
(H16)
Phillips Head
Screwdriver
16 x Screws
16mm (H6)
4 x Rollers
(H15)
(P7)
(P6)
H16
H6
H6
H6
H6
H6
H6
H6
H16
H15
H16
H6
H16
H15
H15
H6
(P7)
H6
H16
(P6)
H15
H15
H6

Step 13
Page 11
If necessary, push the button shown to retract the tabs on guides (H16) on door (P7).
Position door (P7) so that its rollers fit into the inner track on panel (P2).
Tilt door (P7) into position. Push the button on guides (H16) again
to extend the tabs into the guide tracks on panel (P1).
Repeat with door (P6) on the outer track.
(P1)
(P2)
(P1)
(P7)
H16
H16
(P7)
(P7)
H16
H15
(P6)
(P2)
(P7)
(P7)
(P2)
H15
(P7)

Step 14
Page 12
You will need
Step 15
Job complete!
In the interest of our environment please dispose
of all packaging thoughtfully.
4 x Screws
28mm (H11)
Phillips Head
Screwdriver
2 x Handles
(H4)
Attach 1 x handle (H4) onto each door (P6) & (P7) with 2 x screws (H11),
using a phillips head screwdriver as shown.
H4
H11
H4
(P6)
(P7)
H4
(P7)
H11
H11