Cult 5059413396106 Installation guide

Pages 1 of 10
ASSEMBLY & PRODUCT CARE
1 DRAWER DESK
5059413396106 - 5059413121999
Thank you for purchasin this product. Please read the instructions carefully before use to
ensure safe and satisfactory operation of this product.
Pre-assembly preparation
Please ensure instructions are read in full before attemptin to assemble this product
You will need
Screwdriver (not included)
Please check the pack contents before attemptin to assemble this product. A full checklist of
components is iven in this leaflet. If any components are missin , please contact the retailer
from whom you bou ht this product.
This product is HEA Y, it should be assembled as near as possible to the point of use. TAKE
CARE WHEN LIFTING to avoid personal injury and (or) dama e to the product.

Pages 2 of 10
This product takes approximately 15 MINUTES to assemble with 2 PEOPLE.
The fittin s pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG
CHILDREN.
Read this leaflet in full before commencin assembly.
Parts checklist
Part
Description
Qty
1
Cabinet
1
2
Le
4

Pages 3 of 10
Fittings checklist
Fixing Description Qty
A
Bolt M6x40
8
B
Spring Washer
8
C
Flat Washer
8
D
Wood Handle
1
E
Metal Handle
1
F
Bolt M4x30
2
G
Allen Key 4mm
1

Pages 4 of 10
Step by step assembly instructions
Step One
Turn all the Drawers Stopper” and remove the drawer out of the cabinet.
Step Two
Lay part (1) upside down base on soft material to protect the top.
1

Pages 5 of 10
Step Three
- Place part (2) as shown
- Use: Bolt M6x40 (A), Flat Washer (B), Spring Washer (C) and Allen Key to connect the
Legs and Cabinet together.
IMPORTANT: Hand ti hten only to avoid dama e to the le s.
A
B
C
2
1

Pages 6 of 10
Step Four
Choose the Wood handle (D) or Metal Handle (E) to assem drawer. Use screwdriver and Bolt
M4x30 (F).
Step Five
Put the drawer and turn the drawer stopper to it original position.

Pages 7 of 10
Finish.
IMPORTANT: PLEASE NOTE WHEN LIFTING OR MOVING THE TABLE ALWAYS DO SO
FROM THE UNDER FRAME AND NOT THE TABLE TOP

Pages 8 of 10
Safety Instructions
Never dra furniture when movin it, always lift it.
When liftin or movin a table always do so from under frame and not the table top.
Periodically check all fixin s to ensure none have come loose and re-ti hten where necessary.
Please take care when handlin or movin the furniture as careless handlin may cause
dama e or injury.
Furniture can be dan erous if incorrectly installed. Assembly should be carried out by a
competent person. No liability will be accepted for dama e or injury caused by incorrectly
insalled or assembled furniture.
It is recommended that before movin heavy objects to a new location they are completely dis-
assembled to avoid personal injury or dama e to the furniture. Please be careful to retain all
fittin s when doin this.
IMPORTANT: If an Anti-topple device is included with this unit, you must install it in accordance
with the instructions provided usin fixin s suitable for the wall type. If unsure, please seek
advice of a professional.
Care and Maintenance
WHEN CARED FOR PROPERLY, THIS HAND CRAFTED FURNITURE WILL PROVIDE YOU
WITH YEARS OF ENJOYMENT IN YOUR HOME.
How to care for Wood furniture (unpainted)
Furniture with a hard lacquer, wax polish or painted surface should be dusted with a dry cloth.
Waxed furniture will need to be iven a coat of beeswax a couple of times a year to help
maintain its luster.
Spray polishes are best avoided as they contain silicones which may spoil the furniture’s
surface by buildin up over time.
Make sure all surfaces are protected from heat and liquids by mats and coasters. Wipe up spills
immediately and ensure that a mat or pad is placed under paper if you are writin .
Extendable dinin tables should be left extended for the first few months to avoid an uneven
appearance. Likewise, lamps and ornaments should also be moved re ularly.

Pages 9 of 10
Our furniture will endure most temperatures in the home but it is best to avoid placin furniture
next to heat sources such as radiators or fires. Be particularly careful with solid wood as the lack
of humidity caused by central heatin can cause dama e such as warpin .
How to care for Painted Wood furniture
Hand painted brush stroke finish's will hold up to everyday wear and tear quite nicely. However,
it is important to remember that your piece is still a wood piece of furniture and should be cared
for as such.
Painted furniture still requires re ular dustin with a damp cloth. When very soiled wash with a
solution of mild, non-abrasive deter ent and warm water. Wrin a cloth nearly dry and work on a
small section at a time, then rinse with clear water dryin after..
Never leave water to settle on the surface as this will cause dama e. Any liquid spilled onto the
item should be cleaned up immediately usin an absorbent cloth.
AVOID chemical cleaners or liquid furniture polish includin direct contact with reasy
substances
As with all natural wood products, there will be some movement within the parts as the furniture
acclimatises to its surroundin s, you may see sli ht chippin and cracks where panels meet,
this is a completely natural occurrence with ALL painted products usin natural solid timbers.
Painted surfaces can be carefully touched up with matchin paint.
There will be various brush lines, slubs, and little inconsistencies in the painted finish, this is all
part of the relaxed handfinished look and feel of hand painted collections.
How to care for Glass furniture
If the product component is chipped or broken, please consult the manufacturer, retailer or
a ent with re ard to obtainin a manufacturin specification and shape for replacement lass
quotin the model number and batch number.
Do not use the lass as a choppin surface. Do not strike the lass with hard or pointed objects.
Do not sit or stand on horizontal lass surfaces.
Do not place very hot or very cold items a ainst or in close proximity to lass surface(s).
The surface should be protected with coasters, trivets or placemats.
All spills should be blotted up immediately. Do not wipe the spill or this may spread it. Clean the
surface with a clean soft cloth (non-abrasive) and mild deter ent or stone soap.
How to care for Metal furniture
Metal furniture requires minimal maintenance:

Pages 10 of 10
Cleanin your metal furniture is very simple. Use a soft cotton cloth and clean with mild
deter ent or water, usin a towel immediately dry the furniture afterwards.
Metal furniture is usually dama ed due to rust, as a precaution a soft wax after cleanin will help
seal it.
If it has a few spots of rust, you can treat it with rust remover, followin the manufacturers
uidelines. (some finishes are made to look like rust)
Smud es and smears can be removed from metal furniture by usin a window cleaner and a
paper towel.
Indoor metal furniture is not recommended for outdoor use.
How to care for Marble furniture
The surface should be protected with coasters, trivets or placemats.
All spills should be blotted up immediately, do not wipe the spill as this may make it spread.
Clean the surface with a clean soft cloth (non-abrasive) and mild deter ent or stone soap. Do
not use cleaners containin acids.
WHEN CARED FOR PROPERLY, THIS HAND CRAFTED FURNITURE WILL PROVIDE YOU
WITH YEARS OF ENJOYMENT IN YOUR HOME.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE