Bolton Furniture AMBA2120 User manual

4/12/17 1 of 3 Wood Stool
Wood Stool
Thank you for purchasing our Stool. We have found it helpful to have a second person present
during the assembly of this product.
Assembly Instructions
Lay out all parts on a "non-abrasive"surface to avoid scratching furniture.
E
4
8
M6*45mm
BOLT
D
QTY.DRAWING DESCRIPTIONNO.
1
F
M6*70mm
BOLT
G
4
4
H
8
I
8
J
1
K

4/12/17 2 of 3 Wood Stool
Step 1
Step 2
Step 3
DO NOT TIGHTEN FIRMLY AT THIS TIME.
Step 4
Lay Top Seat (A) upside down and attach Side Assembly (B) to underside of Seat
using 4 - M6 x 45mm Bolts (D), 4 washers (F) and 4 Lock Wahsers (E).
Insert Cross Dowels (H) in to edge of Cross Rail ( C). Glue and insert Wooden Dowel (I) into
edge of Cross Rail ( C).
Put Glue (K) into the dowel Hole in Side Assembly (B). Align Dowels in
Cross Rail to Dowel Holes in Side Assembly. Attach 2 Cross Rails ( C)
using 4 - M6 x 70MM Bolts (G). Align the Bolts thru the hole in Side
Assembly (B) into the Cross Dowel in the Cross Rail ( C). TIGHTEN
THESE BOLTS FIRMLY! IT IS GOOD TO SEE GLUE SQUEEZE
OUT - CLEAN UP EXCESS GLUE WITH DAMP CLOTH.
Read through these instructions thoroughly before beginning assembly. We have found this to be
of great value when first assembling this product.
Remove all parts and hardware from packing material. Wooden pieces should be placed on a non
abrasive surface (like the carton or carpet) to prevent damage to the finish.
F
E
D
A
B
F
E
D
C

4/12/17 3 of 3 Wood Stool
Step 5
TIGHTEN ALL BOLTS FIRMLY AT THIS TIME.
CARE
Clean with mild soap and wipe dry.
For best service, to order replacement parts go to www.alaterrefurniture.com.
Use the order form on the web site to order your replacement parts. Thank You!
Put Glue (K) into the dowel Hole in Side Assembly (B). Align Dowels in Cross Rail to Dowel
Holes in Side Assembly. Attach 2 Cross Rails ( C) using 4 - M6 x 70MM Bolts (G). Align the
Bolts thru the hole in Side Assembly (B) into the Cross Dowel in the Cross Rail ( C). TIGHTEN
THESE BOLTS FIRMLY! IT IS GOOD TO SEE GLUE SQUEEZE OUT - CLEAN UP
EXCESS GLUE WITH DAMP CLOTH.
Attach Side Assembly (B) to underside of Seat using 4 - M6 x 45mm Bolts (D), 4
washers (F) and 4 Lock Wahsers (E).
REPLACEMENT PARTS:
E
F
F
E
D