Eagle Group 357998 User manual

ASSEMBLY INSTRUCTIONS
Drawers with NSF Slides
Parts List
CAUTION
INSPECT CONTENTS IMMEDIATELY AND FILE CLAIM WITH DELIVERING CARRIER FOR ANY DAMAGE.
SAVE YOUR BOX AND ALL PACKING MATERIALS.
YOU ARE RESPONSIBLE FOR DAMAGE TO YOUR UNIT IF RETURNED IMPROPERLY PACKED.
EG9967 Revised 04/08
#qty description
#1 1 drawer pan
#2 1 drawer frame
#3 1 drawer enclosure
#4 1 pair of slides
#5 8 bolts
#6 8 nuts
#7 8 bearings
#1
#2
Eagle Foodservice Equipment, Eagle MHC, SpecFAB, and Retail Display are divisions of Eagle Group. ©2008 by the Eagle Group
• 100 Industrial Boulevard, Clayton, Delaware 19938-9905 U.S.A. • www.eaglegrp.com
• Phone: [phone] • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100
• Fax: [phone]
PART #357998
(continued on back page)
#3
#4
#6
#5
#7
Step 1 - Attach bearings to drawer frame.
Step 2 - Drop drawer pan into drawer frame.
drawer pan
drawer frame
drawer frame
bearing
bolt
nut

ASSEMBLY INSTRUCTIONS
Drawers with NSF Slides
Eagle Foodservice Equipment, Eagle MHC, SpecFAB, and Retail Display are divisions of Eagle Group. ©2008 by the Eagle Group
• 100 Industrial Boulevard, Clayton, Delaware 19938-9905 U.S.A. • www.eaglegrp.com
• Phone: [phone] • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100
• Fax: [phone]
(End)
front of table
drawer
enclosure
hat
channel
drawer pan
assembly
drawer
enclosure
Step 5 - Attach drawer enclosure to hat channels underneath adjoining table.
screw
front bearings
rear
bearings
slide
Step 6 - Place drawer pan assembly into drawer enclosure.
• On drawer enclosure, extend slides out as far out as possible.
• Lower rear bearings of drawer pan assembly into slides.
• Slide drawer pan assembly rearward to allow front bearings into slides.
Step 3 - Attach bearings to drawer enclosure.
drawer
enclosure
bearing
nut
bolt
slide
bearing
Step 4 - Attach slides to drawer enclosure.
Hang slides on bearings.
drawer
slide