BON CHARGE Infrared PEMF Mat User manual

Infrared PEMF Mat Max USER MANUAL

Table of Contents
Benefits
Safety
Disposal
Welcome
Near Infrared Light Benefits
Key Points
Activating your Infrared PEMF Mat Max
Photosensitivity Test
Usage Instructions
Multiple Usages
What to Expect
Setting Up and Using Your
Infrared PEMF Mat Max
What’s In the Box?
Controller Configuration
Warnings and Cautions
Medical Warning
How to Operate Your Infrared PEMF Mat Max
Temperature Conversion Chart
Technical Specifications
Frequently Asked Questions
Activating PEMF Settings
Activating Red Light Therapy
What is PEMF?
When Can I Use My PEMF Mat?
What Setting Should I use?
How Do I Clean My Mat?
What Do I Wear When Using my PEMF Mat?
Activating FAR Infrared Light (Heat)
Setting the Timer
Cautions
Additional Cautions
Electrical Safety
Disclaimer
Maintenance, Cleaning and Disposal
Maintenance
Cleaning
Warranty and Returns
Warranty
Returns

Welcome
Congratulations on receiving your very own BON CHARGE Infrared PEMF
Mat Max. Before using your Infrared PEMF Mat Max please read this User
Manual in detail.
The Infrared PEMF Mat Max has been designed with your safety in mind.
However, it’s important to follow basic safety protocols when using this
device.
Benefits
The Infrared PEMF Mat Max has been designed to house multiple optimal
wellness components which are listed below:
Most Infrared PEMF Mats only have Near and FAR Infrared Light built in. At
BON CHARGE we know light well! Therefore, we have added 660nm red
light to your PEMF Mat Max so you can enjoy the incredible benefits of
red-light therapy whilst you PEMF.
Function Benefits
Improves deep sleep
Grounding effect
Level 1 (3Hz) – Delta waves
Level 2 (7.8Hz) – Schumann Resonance
Increase calmness and creativityLevel 3 (10Hz) – Alpha waves
Logical thinking, conscious
thought, and meditation
Level 4 (25Hz) – Beta waves
All the above(Level 5) All four PEMF settings at 1-2
second intervals
Skin restoration and repair660nm Red Light
Deep tissue restoration and repair850nm Near Infrared Light
Purification and relaxationFAR Infrared Light
Balance mood and calmAmethyst
Negative charged ionsGermanium
Balance energy fieldsTourmaline

Key Points
Activating Your Infrared PEMF Mat Max
Your Infrared PEMF Mat Max comes with everything you need to start
your journey to an optimal life. You are about to experience the epic
benefits of using PEMFs. For the best possible results, it is highly
recommended you read this manual prior to using your Infrared PEMF
Mat Max for the first time.
Photosensitivity Test
It is very important to do a photosensitivity test prior to long sessions
with your Infrared PEMF Mat Max. Turn on your Infrared PEMF Mat Max
and switch on the NIR and Red-Light settings. Shine the light on an
exposed part of your forearm, about 1 inch away, for 2 minutes. If you
experience any discomfort or redness on your skin, you must not use
your Infrared PEMF Mat Max until you have sought professional advice
from your doctor or healthcare provider.
Usage Instructions
You should lay your Infrared PEMF Mat Max on a stable surface prior to
use. You can wear clothes or no clothes during a session, it’s completely
your choice. When using the Red and Near Infrared Light settings we
would recommend the least amount of clothes possible for maximum
benefits. We recommend a minimum of 30 minutes per session, but the
device can be used for up to 12 hours in one session.
Multiple Usages
Infrared PEMF sessions works best when administered consistently. The
best results will be seen from daily use but as a minimum it is
recommend using your Infrared PEMF Mat Max at least 3 times a week.

What to Expect
Depending on which settings you use you can enjoy the following benefits,
when used consistently.
Function Benefits
Improves deep sleep
Grounding effect
Level 1 (3Hz) – Delta waves
Level 2 (7.8Hz) – Schumann Resonance
Increase calmness and creativityLevel 3 (10Hz) – Alpha waves
Logical thinking, conscious
thought, and meditation
Level 4 (25Hz) – Beta waves
All the above(Level 5) All four PEMF settings at 1-2
second intervals
Skin restoration and repair660nm Red Light
Deep tissue restoration and repair850nm Near Infrared Light
Purification and relaxationFAR Infrared Light
Balance mood and calmAmethyst
Negative charged ionsGermanium
Balance energy fieldsTourmaline

Setting Up and Using
Your Infrared PEMF Mat Max

What’s in the Box?
Controller Configuration
1 x Infrared PEMF Mat Max 1 x Carry Bag
1 x Power Cable + Controller
1. Power Switch (on/off)
2. QR Code for user manual
3. PEMF Button (on/off/levels)
4. Near Infrared (850nm) and Red Light (660nm)
5. FAR Infrared Light (Temperature adjustment)
6. Timer (1 hour to 12 hours)
1.
2.
3.
4.
5.
6.

How To Operate Your Infrared PEMF Mat Max
Step 1
Remove all components from the box. Lay the Infrared PEMF Mat Max on the
floor or other stable surface and connect the Power Cable/Controller to the
mat.
When connecting your PEMF Mat Max to the controller, please ensure that
you press the 2 pins in and direct your controller into the PEMF Mat in a
straight line. If this is done incorrectly or if the connection is wiggled, it will
cause damage to your controller that is not covered under the PEMF Mat
warranty.
When disconnecting your controller from the PEMF Mat, please ensure that
you press the 2 pins in and direct your controller out of the PEMF Mat in a
straight line. If this is done incorrectly or if the connection is wiggled, it will
cause damage to your controller that is not covered under the PEMF Mat
warranty.

Step 2
Plug the other end of the Power Cable/Controller into an appropriate
power outlet.
Step 3
Turn on the device by pressing and holding the
power button until the controller activates (to turn
off the device press and hold the power button a
further time until controller turns off)

PEMF settings are as follows:
P1 (3Hz) – Delta waves to improve deep sleep.
P2 (7.8Hz) – Earthing/Grounding – Earth's electromagnetic field (Schumann Resonance)
P3 (10Hz) – Alpha waves – Increase calm and creativity.
P4 (25Hz) – Beta waves - Logical thinking, conscious thought, and meditation
P5 - All four settings at 1-2 second intervals
Activating PEMF Settings
Click the icon to toggle through the
pre-set PEMF settings. Once you have chosen
your setting from the options the PEMF will be
activated on the device
Note: PEMF setting will turn off
automatically after 20 minutes
Activating Red Light Therapy
Click the icon to turn on Red Light
Therapy (660nm Red Light and 850nm Near
Infrared Light)

Activating FAR Infrared
Light (Heat)
FAR Infrared Light is controlled by the
section. To choose the level of FAR Infrared
Light (Heat) press the + button to turn up the
heat and the – button to reduce the heat. The
heat range is 0-70 degrees centigrade (see
conversion chart for Fahrenheit equivalents).
Holding down the buttons will speed up the
process if required.
Setting the Timer
The timer is controlled by the section. To
choose your desired session time press the +
button to increase the time and the – button to
decrease the time. The PEMF mat is set up for
1-hour minimum session times at 1 hour
intervals to a maximum of 12 hours use.

Centigrade °C Fahrenheit °F
50 °F
59 °F
10 °C
15 °C
68 °F20 °C
77 °F25 °C
Temperature Conversion Chart
86 °F30 °C
95 °F35 °C
104 °F40 °C
113 °F45 °C
122 °F50 °C
131 °F55 °C
140 °F60 °C
149 °F65 °C
158 °F70 °C

Frequently
Asked Questions

What is PEMF?
PEMF (Pulsed Electromagnetic Fields) works by sending beneficial
low-level frequencies of energy through your body. PEMF has been
shown to improve deep sleep, have a grounding effect, increase
calmness and creativity, and help with conscious thought and logical
thinking. PEMF in our Mat mimics the frequencies found in nature to
restore balance.
When Can I Use My PEMF Mat Max?
You can use your PEMF Mat whenever and wherever you wish. Our
customers have the best results using their PEMF Mats in the following
ways:
• Before bedtime
• Watching TV / reading a book
• Meditating
• After a workout
• Whilst doing Yoga / Pilates / stretching
• When you need creativity
• When you are feeling stressed

What Setting Should I Use?
It is best to listen to your body when choosing the best setting to use.
As a reminder the settings are below:
Level 1 (3Hz) – Delta waves to improve deep sleep.
Level 2 (7.8Hz) – Earthing/Grounding – Earth's electromagnetic field
(Schumann Resonance)
Level 3 (10Hz) – Alpha waves – Increase calm and creativity.
Level 4 (25Hz) – Beta waves - Logical thinking, conscious thought, and
meditation
Level 5 - All four settings at 1-2 second intervals
How Do I Clean My Mat?
The PEMF Mat is super easy to clean. Just turn off the device and once
it’s cooled down just wipe down with a damp cloth. Allow to cool and
dry before folding away.
What Do I Wear When Using My PEMF Mat?
To experience the full benefits of your PEMF Mat we always suggest
wearing minimal clothing. However, that is not always possible, and
you will still get great benefits. The PEMF Mat can heat up to high
temperatures if you select that option, so it is always best to wear
something light and comfortable if using high heat.

Technical Specifications

Model BON CHARGE Infrared PEMF Mat Max
Size
PEMF Settings
Light Wavelengths
74.8 inches (190cm) x 31.5 inches (80cm)
5 settings
660nm Red
850nm Near Infrared
FAR Infrared
LEDs
Voltage
48pcs
Flicker
AC 110V (USA/Canada)
Warranty
<0.1%
1 Year
Certification FDA, CE, ISO9001, ISO13485
Material PU Leather, Nylon Meshing, Nano Charcoal Cotton, Oxford
Waterproof Fabric, EMF Protection Layer, Amethyst,
Germanium and Tourmaline.
Weight 42 pounds (19kg)
EMF 0.2-0.6mG
Specifications

Medical Warning
Consultant your doctor or physician before using this device.
Safety
• Do not stare directly into the LEDs or its reflection in the mirror. This can cause
temporary irritation to the eyes.
• Do not allow children to use the device unsupervised or without clearance from
your medical practitioner.
• This device is an electrical device and to avoid electric shocks you must adhere
to the following:
• Do not drop the device in liquid.
• Do not wash this device with any liquids.
• Do not touch with wet hands.
• Do not use the device on wet or damp skin.
• Do not tug or pull on the charging cable when charging the device.
• Do not use the device if it has been dropped, left outside, or exposed to liquids.
• Do not use on or near hot surfaces.
• Do not operate near flammable or combustible products or where vapours may
be present. Explosion or fire may occur.
• Do not use this device on people with disability, sleeping, or unconscious
people.
• Do not use this device on open wounds.
• Do not use in conjunction with salves, balms, or ointments.
• Do not modify or attempt to modify this device.
• Do not attempt to repair this device.
Cautions
BON CHARGE advises that before using your Infrared PEMF Mat Max you must
seek professional doctors advice. This includes if:
• You are pregnant.
• Are taking drugs known to cause sensitivity of skin to light .
• Have any suspicious or cancerous lesions.
• Recently had a steroid injection or use topical steroids.
• Have a serious medically diagnosed condition.
• Have a heart condition or Pacemaker.
Warnings & Cautions

Additional Cautions
• If you experience discomfort or have a concern about the device, stop use
immediately and contact your doctor.
• For indoor use only.
• Use only equipment provided with your device.
If you have any questions, please contact us at [e-mail]
Electrical Safety
• Do not place or operate the device near to water or liquids.
• Do not place near or pour running water over device.
• This device is not to be used in the vicinity of water.
• Do not store device in temperatures exceeding 140F/60C.
• Do not use your device if damaged, this may result in electric shock or injury.
Disclaimer
BON CHARGE PEMF Mat is not intended to diagnose, cure, or prevent specific
diseases or medical conditions. These products are only intended to be used on
mild conditions that have been medically diagnosed.
Our PEMF Mat and information contained is not intended as medical advice or a
substitute for medical advice.
BON CHARGE does not intend these products to cure any physical or skin
conditions solely from their use. A qualified health professional or doctor should
always be consulted prior to using the products, and professional medical attention
should be sought regarding any serious or life-threatening conditions.
These statements have not been evaluated by the Food and Drug Administration.
This product is not intended to diagnose, treat, cure, or prevent any disease.

Disposal
This device must not be deposed of with your
normal household rubbish. This device requires
disposal via your designated waste collection
point.
Maintenance
• Store the device only when it has cooled down to room temperature.
• Fold the device correctly and store in the bag provided.
• Ensure the controller is unplugged from the device before storing.
• Do not store in hot and humid conditions.
• Do not put heavy objects on the device.
Cleaning
• Ensure your PEMF Mat is switched off and unplugged at the wall socket.
• Clean the surface with a damp cloth.
• Avoid using any polishes or bleaches as they may damage your device.
Maintenance, Cleaning and Disposal
Warranty and Returns
Manufacturer’s Warranty (Infrared PEMF Mat Max)
BON CHARGE warrants that this device (Infrared PEMF Mat Max) will function and
perform within the specifications for one year from the date of delivery.