Bosch High-Speed Positioning System User manual

Video | High-Speed Positioning System
High-Speed Positioning System
www.boschsecurity.com
uPans up to 100º per second, 360º continuous
rotation
uTilts up to 40º per second, -90º to +40º range
uWide range of camera-zoom combinations
uMulti-protocol including Biphase and Bilinx
uIP 66 rated, tough, attractive casing with up to 20 kg
balanced load
The Bosch High-Speed Positioning System is a
complete solution that is high on quality and
performance. It can pan 360° continuously at speeds
of up to 100° per second. An extensive range of
options lets you tailor the system to your specific
requirements.
Autopan and patrol functions are accurate to within
0.02°, with text labels assigned to presets for added
convenience. Insert privacy zones or sector blanking to
block private areas from being viewed. Automatic lens
scaling, which keeps zoom and speed synchronized,
ensures smooth video pictures throughout pan and tilt
movement.
A completely self-contained unit, the high-speed
positioning system is easy to install and maintain.
Multi-protocol capabilities, including Bilinx and
Biphase, also simplify connections. The tough,
protective casing can support 20 kg balanced load and
is IP66-rated – ideal for weathering the outdoor
conditions common in traffic and industrial
applications. All units have a sunshield. Versions with
integrated wiper are also available, including an
optional washer.
Functions
Autopan and patrol
With 0.02º tracking accuracy for preset positioning,
autopan and patrol functions are very precise. Assign
convenient text labels using up to 20 characters to
presets and different areas. Define highly flexible
tracking sequences by combining patrol positions with
different speed settings, up to a maximum 100° per
second pan and 30° per second tilt.
There are four local alarm inputs and two relay
outputs.
Multi-protocol
The high-speed positioning system operates with
Bosch hardware platforms – Divar, DiBos, Allegiant –
and is fully compatible with control protocols such as
Biphase and Bilinx. Biphase allows control of pan, tilt,
zoom, focus, and the wiper / washer. Bilinx offers the
same functionality as Biphase, with additional
communication capability.
High-speed pan and tilt with automatic scaling
The unit can reach a very fast panning speed of 100º
per second with 360º continuous panning in manual
mode. Tilt speeds achieve 40º per second in manual

mode. It also offers ample scope for changing the
horizontal view, with movement ranging between -90º
below and +40º above the horizon. To ensure smooth,
clear pictures during rapid movement, automatic
scaling synchronizes the P&T speed to the amount of
zoom.
Interconnections
• RS-232C connector for firmware upgrades / IP control
• RS-485 connector for control interfaces
• Biphase
• Bilinx
Certifications and approvals
Safety acc. to EN 60950 (CE)
Immunity acc. to EN 50130-4 (CE)
acc. to EN 55022 Class B (CE)
Emission acc. to EN 61000-3-2 (CE)
acc. to EN 61000-3-3 (CE)
Water/dust protection IP 66 acc. to EN 60529
Region Certification
Europe CE UPH-Z26H
Installation/configuration notes
UPH dimensions
258 (10.16)
514 (20.24)
584 (22.99)
90º
-40º
514 (20.24)
73
(2.87)
724 (28.50)
374 (14.72)
R350
(13.78)
R385 (15.16)
2 | High-Speed Positioning System

MTC-WUPH
593 (23.35)
520 (20.47) 110
(4.43)
Ø 9
Ø 101.6
140 (5.51)
50 (1.97)
145.7 (5.74)
150 (5.9)
170 (6.69)
MTC-PUPH
Ø 101.6 (4.0)
Ø 146 (5.75)
Ø 146 (5.75)
Ø 101.6 (4.0)
150 (5.9)
Ø 7 (0.27)
MTC-CORN-W
MTC-POLE-W
HAC-WAS05
347.5347.5 (13.68)
269269 (10.59) 200
200 (7.87)
458458 (18.03)
152152
(5.98)
135.5135.5
(5.34)
Ø 8
HAC-WAS30
Ø 8
683 (26.89)
225 (8.86)
347.5 (13.68)
269 (10.59) 200 (7.87)
458 (18.03)
152
(5.98)
135.5
(5.34)
Dimensions in mm (in.)
Parts included
Quantit
y
Component
1Head unit with pre-installed camera and lens
1 Base unit with power supply
1 Serial cable
1 Serial adapter
1 Installation manual
1 Power supply unit
1 Set of mounting accessories
• 4 mm Allen wrench
• Bracket with fixing screws
• Cable ties
• Tube
• Label
3 | High-Speed Positioning System

Technical specifications
Electrical
Input voltage 24 VAC - 5 A / 230 VAC - 0.5 A
Input frequency 50 Hz
Integrated housing Thermostat heater, 20 W
Camera input 12 VDC - 800 mA
Lens input +6 to +15 VDC - 200 mA
Wiper (optional) input 24 VAC – 400 mA
Tour control Autopan; Preset; Patrol
Presets 250 selectable (max. 99 via keyboard)
Preset / area names 20 character string
Preset accuracy 0.02 º
Data set-up Flash memory
Serial RS-232, Sub-D for firmware upgrade
Protocols Bilinx, Biphase and third party protocols
on RS485
Supported platforms DiBos, Divar, Allegiant
Max addressable units 255 (dipswitch setting)
Firmware upgrades RS-232 interface
Configuration modes Via PC or OSD
Configuration interface RS-485
UPH-Z Series – 36x camera module
Number of effective pixels Approx. 440,000
Imager 1/4 in. Exview HAD CCD
Resolution 540 TVL (NTSC, PAL) typical
Minimum illumination 1.4 Lux (typical) at F1.6, 50 IRE
S/N Ratio More than 50 dB
Electronic shutter 1/1 to 1/10,000 s, 22 steps
White balance 2000 K to 10,000 K
Gain Off/Auto (with adjustable limit)
AE Control Auto, manual, priority mode, bright, EV
compensation, backlight compensation
Focusing system Auto (sensitivity: normal, low), One-Push
AF, manual, infinity interval AF, zoom
trigger AF
Video output 1.0 Vp-p, 75 Ohm
Masking
Privacy zone On/off (24 positions)
Max blocks display 8
Blocks resolution 160 H x 120 V
Lens
36 x optical zoom F=3.4 (wide) to 122.4 (tele), F1.6 to
F4.5
Digital zoom 12 x (312 x with optical zoom)
Angle of view (H) 57.8° (wide) to 1.7° (tele)
UPH-Z series – 26x camera module
Number of effective pixels Approx. 440,000
Imager Interline CCD 1/4 –inch format
Resolution ≥ 460 TVL
Minimum illumination 1.0 Lux (typical) at F1.6, 50 IRE
S/N Ratio More than 50 dB
Electronic shutter 1/1 to 1/10,000 s, 22 steps
White balance Auto, ATW, indoor, outdoor, One-Push,
manual
Gain Auto/manual (-3 to +28 dB, 2 dB steps)
AE Control Auto, manual, priority mode, bright, EV
compensation, backlight compensation
Focusing system Auto (sensitivity: normal, low), One-Push
AF, manual, infinity interval AF, zoom
trigger AF
Video output CVBS: 1.0 Vpp
Masking
Privacy zone On/off (24 positions)
Max blocks display 8
Blocks resolution 160 H x 120 V
Lens
26 x optical zoom F=3.5 (wide) to 91.0 mm (tele), F1.6 to
F3.8
Digital zoom 12 x (312 x with optical zoom)
Angle of view (H) 55° (wide) to 2.3° (tele)
Mechanical
Dimensions (H x W x D) 584 x 258 x 514 mm
(23 x 10.2 x 20.2 in)
Weight Approx. 14 kg (31 lb)
Mounting Top mount (OTT)
Color Light grey (RAL 7035)
Material Die cast and extruded aluminum, ABS
Rotation
4 | High-Speed Positioning System

horizontal 360º continuous
vertical -90º to +40º
Speed Manual Patrol / Autopan
horizontal (pan) 0.1º to 100º/s 0.1º - 100º/s
vertical (tilt) 0.1º to 40º/s 0.1º – 30º/s
Static / dynamic torque
horizontal 20 Nm
vertical 20 Nm
Transmission Toothed belt
Environmental
Operating temperature -20 ºC to +50 ºC (-4 ºF to +122 ºF)
Storage temperature -20 ºC to +60 ºC (-4 ºF to +140 ºF)
Humidity <90% relative humidity (noncondensing)
Enclosure protection IP 66
Ordering information
UPH‑Z26H‑10 HS P&T with 26x D/N Camera Module
24 VAC 50/60 Hz, Biphase and Bilinx, 26x zoom AF,
PAL
Order number UPH-Z26H-10
UPH‑Z26HW‑10 HS P&T + wiper with 26x D/N Camera
Module
24 VAC 50/60 Hz, Biphase and Bilinx, 26x zoom AF,
PAL
Order number UPH-Z26HW-10
UPH‑Z26H‑50 HS P&T with 26x D/N Camera Module
230 VAC 50 Hz, Biphase and Bilinx, 26x zoom AF, PAL
Order number UPH-Z26H-50
UPH‑Z26HW‑50 HS P&T + wiper with 26x D/N Camera
Module
230 VAC 50 Hz, Biphase and Bilinx, 26x zoom AF, PAL
Order number UPH-Z26HW-50
UPH‑2D10‑10 HS P&T with 1/2" DinionXF D/N Camera
24 VAC, 10x zoom, IR, 8.5 – 85 mm, PAL
Order number UPH-2D10-10
UPH‑2D10W‑10 HS P&T + wiper with 1/2" DinionXF D/N
Camera
24 VAC, 10x zoom, IR, 8.5 – 85 mm, PAL
Order number UPH-2D10W-10
UPH‑2D10‑50 HS P&T with 1/2" DinionXF D/N Camera
230 VAC, 10x zoom, IR, 8.5 – 85 mm, PAL
Order number UPH-2D10-50
UPH‑2D10W‑50 HS P&T + wiper with 1/2" DinionXF D/N
Camera
230 VAC, 10x zoom, IR, 8.5 – 85 mm, PAL
Order number UPH-2D10W-50
UPH‑2D15‑10 HS P&T with 1/2" DinionXF Camera
24 VAC, 15x zoom, 8 – 120 mm, PAL
Order number UPH-2D15-10
UPH‑2D15W‑10 HS P&T + wiper with 1/2" DinionXF
Camera
24 AC, 15x zoom, 8 – 120 mm, PAL
Order number UPH-2D15W-10
UPH‑2D15‑50 HS P&T with 1/2" DinionXF Camera
230 VAC, 15x zoom, 8 – 120 mm, PAL
Order number UPH-2D15-50
UPH‑2D15W‑50 HS P&T + wiper with 1/2" DinionXF
Camera
230 VAC, 15x zoom, 8 – 120 mm, PAL
Order number UPH-2D15W-50
UPH‑3D10‑10 HS P&T with 1/3" DinionXF D/N Camera
24 VAC, 10x zoom, IR, 8.5 – 85 mm, PAL
Order number UPH-3D10-10
UPH‑3D10W‑10 HS P&T + wiper with 1/3" DinionXF D/N
Camera
24 VAC, 10x zoom, IR, 8.5 – 85 mm, PAL
Order number UPH-3D10W-10
UPH‑3D10‑50 HS P&T with 1/3" DinionXF D/N Camera
230 VAC, 10x zoom, IR, 8.5 – 85 mm, PAL
Order number UPH-3D10-50
UPH‑3D10W‑50 HS P&T + wiper with 1/3" DinionXF D/N
Camera
230 VAC, 10x zoom, IR, 8.5 – 85 mm, PAL
Order number UPH-3D10W-50
UPH‑3D15‑10 HS P&T with 1/3" DinionXF Camera
24 VAC, 15x zoom, 8 – 120 mm, PAL
Order number UPH-3D15-10
UPH‑3D15W‑10 HS P&T + wiper with 1/3" DinionXF
Camera
24 VAC, 15x zoom, 8 – 120 mm, PAL
Order number UPH-3D15W-10
UPH‑3D15‑50 HS P&T with 1/3" DinionXF Camera
230 VAC, 15x zoom, 8 – 120 mm, PAL
Order number UPH-3D15-50
UPH‑3D15W‑50 HS P&T + wiper with 1/3" DinionXF
Camera
230 VAC, 15x zoom, 8 – 120 mm, PAL
Order number UPH-3D15W-50
Accessories
MTC‑WUPH Outdoor Wall Mount
for UPH series
Order number MTC-WUPH
MTC‑PUPH Outdoor Pole Mount
for mounting a UPH series unit to the top of a pole
Order number MTC-PUPH
5 | High-Speed Positioning System

MTC‑CORN‑W Corner Adapter for MTC‑WUPH
Order number MTC-CORN-W
MTC‑POLE‑W Pole Adapter for MTC-WUPH
for mounting a UPH series unit to the side of a pole
Order number MTC-POLE-W
6 | High-Speed Positioning System
Represented by:
Americas: Europe, Middle East, Africa: Asia-Pacific: China: America Latina:
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: [phone]
Fax: [phone]
[email protected]
www.boschsecurity.us
Bosch Security Systems B.V.
P.O. Box 80002
5617 BA Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: [phone]
[email protected]
www.boschsecurity.com
Robert Bosch (SEA) Pte Ltd, Security
Systems
11 Bishan Street 21
Singapore 573943
Phone: [phone]
Fax: [phone]
[email protected]
www.boschsecurity.asia
Bosch (Shanghai) Security Systems Ltd.
201 Building, No. 333 Fuquan Road
North IBP
Changning District, Shanghai
200335 China
Phone [phone]
Fax: [phone]
www.boschsecurity.com.cn
Robert Bosch Ltda Security Systems Division
Via Anhanguera, Km 98
CEP 13065-900
Campinas, Sao Paulo, Brazil
Phone: [phone]
Fax: [phone]
[email protected]
www.boschsecurity.com
© Bosch Security Systems 2013 | Data subject to change without notice
2206216843 | en, V2, 04. Oct 2013