Bosch Home Appliances
When the brewing process is complete,
the status LED F (3c) stops blinking
The brewing unit can be opened at this
point Your beverage is now ready You
can sit back and enjoy it or prepare
another beverage
i
There may be short pauses during the
brewing process This is to achieve the
optimal avor extraction
If you don’t prepare any other beverages,
your machine automatically switches to
power-save mode
To save even more electricity, we recom-
mend turning your TASSIMO machine off
with the ON / OFF switch (1) after each use
Your TASSIMO appliance works only with
specially developed capsules known as
TASSIMO T DISCs
You can buy these T DISCs at various
retailers, or online at wwwtassimocom
T DISCs may be stored in their own pack-
aging or in other containers of your choice
They should be stored in a cool, dry place
It is not necessary to store T DISCs in
the refrigerator Do not keep them in the
freezer Provided the outer packaging is
intact, T DISCs may be used until the best-
before date which is printed on the outer
package
Once outer foil packaging is removed, use
T DISCs within 6 weeks
The machine is now ready to brew your
beverage
¡
– Always wait until the Status LED F
(3c) has stopped blinking before at-
tempting to open the brewing unit
– Do not open the brewing unit during
the brewing process
– The brewing unit locks automatically
for beverages with a higher brewing
pressure
– Do not touch the piercing unit
immediately after brewing
– Please note that the beverages are
very hot when dispensed
– T DISC is hot after brewing, please
handle with care
To brew your beverage with the
recommended settings as dened in the
T DISC bar code, go straight to Step 5
► You have the option to adjust the
to your taste with
the drink adjustment buttons:
(2a):
larger / longer drink for a milder avor
(2b):
smaller / shorter drink for a stronger
avor
If the drink adjustment was chosen,
either the or LED will light up until
you start the brewing proces
Press the Start / Stop button (2) once to
start the brewing process
► The status LED F (3c) and (if selected)
the or LED blinks while the
machine is brewing
► If you want a larger beverage, you
can add more water immediately after
the brewing process by pressing and
holding the Start / Stop button (2) or the
drink adjustment button + (2a)