Bosch FlexiDomeXF VDC-485V03-10 User manual

Video | VDC‑485 Series Dome Cameras FlexiDome XF
The FlexiDomeXF series are the ultimate solutions for
virtually any indoor or outdoor surveillance application.
These color dome cameras are high-performance, vandal-
resistant units with NightSense.
The cast-aluminum housing, polycarbonate dome, and
hardened inner liner can withstand the equivalent of 55 kg
(120 lbs) of force. The enclosure contains full-featured
color cameras with 1/3-inch CCD and integral varifocal
lenses. Ideal for outdoor use, the cameras are protected
against water and dust to IP 66 (NEMA‑4X) standards.
Installation is quick and easy, since the cameras come
completely assembled and ready to use. Using the
proprietary pan/tilt/rotation mechanism, installers can
select the exact field of view. Mounting options are
numerous, including surface, 4S (USA), wall, corner and
suspended ceiling.
The FlexiDomeXF cameras are an ideal solution for many
surveillance applications, even under the most challenging
lighting conditions. Their compact, sleek design and
virtually flush-mount appearance will complement any
decor. The camera enclosure provides the extra
protection necessary for applications such as in schools,
banks, prisons, parking garages, retail and industrial
buildings.
Functions
Technology
The FlexiDomeXF series incorporate the latest technology
adopted from the high-performance DinionXF Color
cameras. This technology ensures the highest possible
image quality at all times and under all conditions. Based
on a unique combination of 15-bit digital video processing
and XF-dynamic, these cameras provide excellent
sensitivity, with up to 32x extended dynamic range. This
delivers a sharper, more detailed image with outstanding
accuracy in color reproduction.
Operation
All cameras feature video motion detection, auto black,
default shutter and back light compensation for optimum
performance in all lighting conditions. The lens wizard and
focus aid make lens adjustment easy and straightforward,
and ensure proper focus throughout the 24-hour cycle. All
cameras incorporate Bilinx, a technology that allows
technicians to set up, control the camera settings, and
even update firmware remotely over the video cable.
Controls and Indicators
•OSD
•5-key operation
Interconnections
•Video connection BNC on flying lead
•Power connection on flying leads
VDC‑485 Series Dome Cameras
FlexiDome XF
▶High impact, vandal-resistant, weatherproof housing
▶NightSense for low light conditions
▶15-bit DSP technology
▶XF-Dynamic for wide dynamic range
▶540 TVL color resolution
▶SensUp 10 x extended sensitivity
▶Bilinx bi-directional communication
▶Patented dome shape for 90º vertical view
www.boschsecurity.com

2 | VDC‑485 Series Dome Cameras FlexiDome XF
Certifications and Approvals
Region Certification
Europe CE Declaration of Conformity VDx
355-455-485-495
USA FCC Declaration of Conformity VDx
355-455-485-495
Safety UL 1950; CSA 22.2 No. 950; EN 60950 (CE)
Immunity EN 50130-4 (CE)
Emission EN 50022 class B (CE); FCC, class B part 15
Water/dust protection IP 66 and NEMA‑4X
Installation/Configuration Notes
____
VD ____
C-485
____
03
04
09
V_
10
20
____ ____
S
____
1
C-485 Color (with NightSense)
203 3 to 9.5 mm F1.0 (Color version)
04 3.7 to 12 mm F1.6
09 9 to 22 mm F1.4
310 PAL color or CCIR mono
20 NTSC color or EIA mono
4Flush mount
S Surface mount
FlexiDomeXF model overview
Model Standard Lens
VDC-485V03-10 PAL 3 to 9.5 mm F1.0
VDC-485V03-20 NTSC 3 to 9.5 mm F1.0
VDC-485V04-10 PAL 3.7 to 12 mm F1.6
VDC-485V04-20 NTSC 3.7 to 12 mm F1.6
VDC-485V09-10 PAL 9 to 22 mm F1.4
VDC-485V09-20 NTSC 9 to 22 mm F1.4
BNC to UTP Transceiver
14
0.55
32
1.26
23.6 0.93
15
0.59
VDA-455UTP
Video Transceive r
Dimensions in mm (in.)
Flush Mounting
158
6.22
39.5 1.56
85
3.35
95
3.7
Dimensions in mm (in.)
VDA-455SMB–Surface Mount Box
130.5
5.14
158
6.22
Dimensions in mm (in.) for surface mounting

VDC‑485 Series Dome Cameras FlexiDome XF | 3
VDA-WMT-DOME –Pendant Wall Mount
205 (8.07)
mm (in)
247 (9.71)
46 (1.81)
83 (3.27)
Ø133 (5.24)
Ø4.8 (0.19)
Ø158 (6.23)
113 (4.43)
113 (4.43)
VDA-PMT-DOME –Pendant Pipe Mount
656 (25.82) mm (in)
Ø158 (6.23)
88 (3.47)
88 (3.47)
Ø11 (0.43)
VDA-CMT-DOME –Corner Mount
90°
90 (3.54)
81 (3.21)mm (in)
25 (0.98)
107 (4.19)
146 (5.75)
180 (7.09)
3-3/4"NPT
Technical Specifications
Electrical
Power supply
Rated voltage 12 VDC or 24 VAC, 50/60 Hz
Voltage range 10.8 to 39 VDC or 12 to 28 VAC, 45 to 65 Hz
Power consumption 4 W (6 W with heater operating)
Imager Interline transfer CCD, 1/3-inch image format
Active picture elements
PAL models 752 H x 582 V
NTSC models 768 H x 494 V
Sensitivity (3200 K)
Model Usable pic-
ture
Usable pic-
ture
Full video
(30 IRE) (50 IRE) (100 IRE)
Color
VDC-485V03 Color 0.16 lx
(0.015 fc)
0.35 lx
(0.033 fc)
1.4 lx
(0.13 fc)
Color + 10 x
SensUp
0.016 lx
(0.0015 fc)
0.035 lx
(0.0033)
0.14 lx
(0.013 fc)
NightSense 0.056 lx
(0.0052 fc)
0.13 lx
(0.012)
0.5 lx
(0.046)
NightSense+
10 x SensUp
0.0056 lx
(0.00052fc)
0.013 lx
(0.0012)
0.05 lx
(0.0046)
VDC-485V04 Color 0.4 lx
(0.037 fc)
0.9
(0.083)
3.6 (0.33)
Color + 10 x
SensUp
0.04 lx
(0.0037 fc)
0.09
(0.0083)
0.36
(0.033)
NightSense 0.14 lx
(0.013 fc)
0.32
(0.03)
1.3 (0.12)
NightSense+
10x SensUp
0.014 lx
(0.0013 fc)
0.032
(0.003)
0.13
(0.012)
www.boschsecurity.com

4 | VDC‑485 Series Dome Cameras FlexiDome XF
Sensitivity (3200 K)
VDC-485V09 Color 0.28 lx
(0.027 fc)
0.62 lx
(0.058 fc)
2.48 lx
(0.23 fc)
Color + 10 x
SensUp
0.028 lx
(0.0027 fc)
0.062 lx
(0.0058)
0.248 lx
(0.023 fc)
NightSense 0.099 lx
(0.0092 fc)
0.23 lx
(0.021)
0.88 lx
(0.081)
NightSense+
10 x SensUp
0.0099 lx
(0.00092)
0.023 lx
(0.0021)
0.088 lx
(0.0081)
SensUp Automatic continuous up to 10 x, off selecta-
ble
Horizontal resolution 540 TVL
Signal-to-noise ratio >50 dB
AGC Auto, maximum level selectable 28 dB
Auto black On/off selectable
Electronic shutter Flickerless, on/off, default shutter
NightSense (XF only) Auto, forced, off selectable
Day/Night (DN only) Auto, monochrome, color selectable
Dynamic range 32 x dynamic range enhancement
Dynamic noise reduction Automatic, off, selectable
Sharpness correction Horizontal and vertical, symmetrical
Backlight compensation Off, programmable window and level selecta-
ble
White balance Automatic sensing (2500 to 9000 K), AWB
hold and manual
Video motion detector Four (4) areas, sensitivity selectable
Camera ID 16-character editable string, position selecta-
ble
Video output Composite video 1.0 Vpp, 75 ohm
Remote control Bi-directional coaxial communication
Synchronization Internal or LineLock*
Connector Flying leads (through the back)
* LineLock (only when AC-powered) synchronizes the camera
to the power line zero crossing for roll-free vertical interval
switching. Vertical phase delay can be adjusted (from 0° to
358°) to allow vertical synchronization in multi-phase power
installations.
Optical
Varifocal Manual zoom and focus adjustment
Iris control Automatic iris control
Viewing angle
3 to 9.5 mm Wide 95º x 69º (H x V)
Tele 30.2º x 22.6º (H x V)
3.7 to 12 mm Wide 76.1º x 55.8º (H x V)
Tele 23.8º x 17.9º (H x V )
9 to 22 mm Wide: 31.2º x 22.8º (H x V)
Tele: 12.8º x 9.6º (H x V )
Mechanical
Dimensions See drawings
Weight 740 g (1.63 lb)
Mounting Flush on hollow surface with three (3) screws
in a 4S electrical box
Color White (RAL9010) trim ring with black inner
liner
Adjustment range 360º pan, 90º tilt, ±90º azimuth
Dome bubble Polycarbonate, clear with UV blocking anti-
scratch coating
Trim ring Aluminum
Environmental
Operating temperature -50 ºC to +50 ºC (-58 ºF to +122 ºF) (with
heater ‘ON’)
Storage temperature -40 ºC to +70 ºC (-40 ºF to +158 ºF)
Humidity 5% to 93% relative humidity
Impact protection IEC 60068-2-75 test Eh, 50 J
EN 50102, exceeding IK 10
Ordering Information
VDC‑485V03‑10 Vandal Resistant Color
Model
1/3-inch, PAL color, 540 TVL, 12 VDC/24
VAC, 50 Hz, w/3-9.5 mm F1.0 Varifocal lens,
white
VDC-485V03-10
VDC‑485V03‑10S Vandal Resistant Color
Model, Surface Mount
1/3-inch, PAL color, 540 TVL, 12 VDC/24
VAC, 50 Hz, w/3-9.5 mm F1.0 Varifocal lens,
white, surface mount
VDC-485V03-10S
VDC‑485V03‑20 Vandal Resistant Color
Model
1/3-inch, NTSC color, 540 TVL, 12 VDC/24
VAC, 60 Hz, w/3-9.5 mm F1.0 Varifocal lens,
white
VDC-485V03-20
VDC‑485V03‑20S Vandal Resistant Color
Model, Surface Mount
1/3-inch, NTSC color, 540 TVL, 12 VDC/24
VAC, 60 Hz, w/3-9.5 mm F1.0 Varifocal lens,
white, surface mount
VDC-485V03-20S
VDC‑485V04‑10 Vandal Resistant Color
Model
1/3-inch, PAL color, 540 TVL, 12 VDC/24
VAC, 50 Hz, w/3.7-12 mm F1.4 Varifocal
lens, white
VDC-485V04-10
VDC‑485V04‑10S Vandal Resistant Color
Model, Surface Mount
1/3-inch, PAL color, 540 TVL, 12 VDC/24
VAC, 50 Hz, w/3.7-12 mm F1.4 Varifocal
lens, white, surface mount
VDC-485V04-10S

VDC‑485 Series Dome Cameras FlexiDome XF | 5
Ordering Information
VDC‑485V04‑20 Vandal Resistant Color
Model
1/3-inch, NTSC color, 540 TVL, 12 VDC/24
VAC, 60 Hz, w/3.7-12 mm F1.4 Varifocal
lens, white
VDC-485V04-20
VDC‑485V04‑20S Vandal Resistant Color
Model, Surface Mount
1/3-inch, NTSC color, 540 TVL, 12 VDC/24
VAC, 60 Hz, w/3.7-12 mm F1.4 Varifocal
lens, white, surface mount
VDC-485V04-20S
VDC‑485V09‑10 Vandal Resistant Color
Model
1/3-inch, PAL color, 540 TVL, 12 VDC/24
VAC, 50 Hz, w/9-22 mm F1.4 Varifocal lens,
white
VDC-485V09-10
VDC‑485V09‑20 Vandal Resistant Color
Model
1/3-inch, NTSC color, 540 TVL, 12 VDC/24
VAC, 60 Hz, w/9-22 mm F1.4 Varifocal lens,
white
VDC‑485V09‑20
VDC‑485V09‑10S Vandal Resistant Color
Model, Surface Mount
1/3-inch, PAL color, 540 TVL, 12 VDC/24
VAC, 50 Hz, w/9-22 mm F1.4 Varifocal lens,
white, surface mount.
VDC-485V09-10S
VDC‑485V09‑20S Vandal Resistant Color
Model, Surface Mount
1/3-inch, NTSC color, 540 TVL, 12 VDC/24
VAC, 60 Hz, w/9-22 mm F1.4 Varifocal lens,
white, surface mount.
VDC‑485V09‑20S
Accessories
VDA‑455SMB
Surface mount box, high impact for
VDC-455, VDM-455, VDC-485, VDN-498,
NDC-455 and NDN-498
VDA-455SMB
VDA‑455UTP
Adaptor for UTP twisted pair output
VDA-455UTP
S1460 Service/Monitor Cable
for FlexiDome analog and IP (2.5 mm connec-
tor to BNC), 1 m
S1460
UPA-1509-60 Power Supply
120 VAC, 60 Hz, 15 VDC, 9 VA Out
UPA-1509-60
UPA-1509-50 Power Supply
220 VAC, 50 Hz, 15 VDC, 9 VA Out
UPA-1509-50
UPA-2420-50 Power Supply
220 VAC, 50 Hz, 24 VAC, 20 VA Out
UPA-2420-50
UPA-2450-50 Power Supply, 220 V, 50 Hz
220 VAC, 50 Hz, 24 VAC, 50 VA Out
For use with certain 24 VAC camera models.
UPA-2450-50
VDA-455TBL Tinted bubble
Tinted bubble for FlexiDome series
VDA-455TBL
VDA-455CBL Clear bubble
Clear Bubble for FlexiDome series
VDA-455CBL
Ordering Information
VDA-WMT-DOME Wall Pendant Mount
Bracket
Wall pendant mount bracket for FlexiDome
cameras
VDA-WMT-DOME
VDA-CMT-DOME Corner Mount Bracket
Corner mount bracket for FlexiDome cameras
VDA-CMT-DOME
VDA-PMT-DOME Pendant Pipe Mount
Bracket
Pendant pipe mount bracket for FlexiDome
cameras
VDA-PMT-DOME
Software Options
VP‑CFGSFT Configuration Software
for cameras using Bilinx, includes VP-USB
Adaptor
VP-CFGSFT
www.boschsecurity.com

6 | VDC‑485 Series Dome Cameras FlexiDome XF
Americas:
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: [phone]
Fax: [phone]
[email protected]
www.boschsecurity.us
Europe, Middle East, Africa:
Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: [phone]
[email protected]
www.boschsecurity.com
Asia-Pacific:
Robert Bosch (SEA) Pte Ltd, Security Systems
11 Bishan Street 21
Singapore 573943
Phone: [phone]
Fax: [phone]
[email protected]
www.boschsecurity.asia
Represented by
© Bosch Security Systems 2011 | Data subject to change without notice
T3269993227 | Cur: en-US, V22, 12 Oct 2011