Bosch FMM‑325A Series User manual

Fire Alarm Systems | FMM‑325A Series Analog Manual Stations
The FMM‑325A Series Analog Manual Stations are used in
the polling circuit of the Bosch Security Systems, Inc.'s
FPA‑1000‑UL, D9024, D8024, and D10024A Fire Alarm
Control Panels (FACP). They communicate with the control
panel (both power and data) over a two‑wire polling circuit.
The manual station's address on the polling circuit is set by
programming an EEPROM microchip. The D5070 Analog
Device Programmer is required to set the address.
All commercial buildings use manual stations. These manual
stations allow people evacuating a building to initiate an
alarm. The FACP identifies the alarm point on the polling
circuit and the alarm lever latches in the pulled position.
Certifications and Approvals
Region Certification
USA UL UNIU: Boxes, Non-Coded (UL38)
CSFM 7150-1615: 122
ADA Complies with Americans with Disabilities
Act ADA 4.28.3
NFPA Complies with National Fire Protection As-
sociation NFPA 72
Installation/Configuration Notes
Compatibility Information
The following products are compatible with the FMM‑325A
Series Analog Manual Stations:
Category Product ID Product Description
Control Panels: FPA‑1000‑UL Compact Fire Panel
D8024 Analog FACP
D9024 Analog FACP
D10024A Analog FACP
Programmers: D5070 Analog device programmer
Mounting Considerations
The FMM‑325A manual stations are for indoor use only.
The FMM‑325A Series Analog Manual Stations have die-cast
housings that flush mount on a single-gang back box. For
surface mounting, use an FMM‑100BB‑R Surface‑mount
Back Box.
FMM‑325A Series Analog Manual Stations
▶Compatible with advanced digital communication
protocol
▶Digital data communications and power provided over
two-wire circuit
▶EEPROM addressing in module unit
▶Rugged die‑cast housing and corrosion resistant
construction
▶Single‑gang mounting
▶Latching alarm lever
▶UL listed for commercial fire applications
▶Meets Americans with Disabilities Act (ADA)
requirements
www.boschsecurity.com

2 | FMM‑325A Series Analog Manual Stations
Parts Included
Quant. Component
1 Manual station
1 Point Contact Module
1 FMM‑100GR Scored Acrylic Breakrod
1 D102 Key (#1358)
1 Literature pack
Technical Specifications
Electrical
Current
Alarm: 28 mA
Polling: 22 mA ± 20%
Standby: 0.35 mA typical
Voltage
Input: 24 VDC nominal
Operating: 17 VDC to 41 VDC
Environmental Considerations
Temperature (operating): +14°F to +120°F
(-10°C to +49°C)
Mechanical Properties
Activation Force: 5 lb (2.3 kg)
Dimensions (H x W x D): 4.75 in. x 3.2 in. x 0.875 in.
(12.1 cm x 8.1 cm x 2.2 cm)
Material: Painted die‑cast metal
Ordering Information
FMM‑325A Single‑action Manual Station
Communicates with the FPA‑1000‑UL,
D9024, D8024, and D10024A FACPs (both
power and data) over a two‑wire polling circuit
FMM-325A
FMM‑325A‑D Double‑action Manual Station
Communicates with the FPA‑1000‑UL,
D9024, D8024, and D10024A FACPs (both
power and data) over a two‑wire polling circuit
FMM-325A-D
Accessories
D102 Replacement Key
Replacement key (#1358) for the D101 lock.
D102
FMM‑100BB‑R Surface‑mount Back Box
(red)
Red cast‑metal back box
FMM-100BB-R
FMM‑100GR Scored Acrylic Break Rods
Scored acrylic rods (12 per package)
FMM-100GR
Americas:
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: [phone]
Fax: [phone]
[email protected]
www.boschsecurity.us
Europe, Middle East, Africa:
Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: [phone]
[email protected]
www.boschsecurity.com
Asia-Pacific:
Robert Bosch (SEA) Pte Ltd, Security Systems
11 Bishan Street 21
Singapore 573943
Phone: [phone]
Fax: [phone]
[email protected]
www.boschsecurity.com
Represented by
© Bosch Security Systems Inc. 2010 | Data subject to change without notice
T1899690379 | Cur: en-US, V9, 4 Jul 2010