Boser BPF-3310-Z User manual

BPF-3310-Z
10.4” Fanless Panel PC
with Touch Screen, Atom™ N270,
2W Stereo Speaker,
6 COM, 6 USB, 12V DC Adapter

Copyright Disclaimers
The accuracy of contents in this manual has passed through checking and review before
publishing. BOSER Technology Co., Ltd., the manufacturer and publisher, is not liable for
any infringements of patents or other rights resulting from its use. The manufacturer will
not be responsible for any direct, indirect, special, incidental or consequential
damages arising from the use of this product or documentation, even if advised of
the possibility of such damage(s).
This manual is copyrighted and BOSER Technology Co., Ltd. reserves all
documentation rights. Unauthorized reproduction, transmission, translation, and
storage of any form and means (i.e., electronic, mechanical, photocopying, recording)
of this document, in whole or partly, is prohibited, unless granted permission by BOSER
Technology Co., Ltd.
BOSER Technology Co., Ltd. reserves the right to change or improve the contents of
this document without due notice. BOSER Technology Co., Ltd. assumes no
responsibility for any errors or omissions that may appear in this manual, nor does
it make any commitment to update the information contained herein.
T
T
Tr
r
ra
a
ad
d
de
e
em
m
ma
a
ar
r
rk
k
ks
s
s
BOSER is a registered trademark of BOSER Technology Co., Ltd.
ISB is a registered trademark of BOSER Technology Co., Ltd.
Intel is a registered trademark of Intel Corporation.
Award is a registered trademark of Award Software, Inc.
AMI is a registered trademark of AMI Software, Inc.
All other trademarks, products and or product names mentioned herein are
mentioned for identification purposes only, and may be trademarks and/or
registered trademarks of their respective companies or owners.
© Copyright 2009 BOSER Technology Co., Ltd.
All Rights Reserved.
Edition 1.5, July 07, 2011

Table of Contents
Chapter 1 General Description ..................................1
1.1 Major Features....................................................................... 2
1.2 Specifications ........................................................................ 2
1.3 Dimensions ............................................................................ 4
Chapter 2 Unpacking ..................................................5
Chapter 3 Chassis Installation ...................................7
3.1 HDD Installation..................................................................... 7
3.2 WLAN Device Installation ..................................................... 8
3.3 Back Cover Installation......................................................... 9
3.4 Wall Mount Kit...................................................................... 10
Chapter 4 SBC Installation ......................................11
4.1 Before Installation ............................................................... 11
4.2 Board Layout ....................................................................... 12
4.3 Jumper List .......................................................................... 12
4.4 Connector List ..................................................................... 13
4.5 Configuring the CPU ........................................................... 13
4.6 System Memory ................................................................... 14
4.7 VGA Controller .................................................................... 14
4.8 Serial ATA Connector ......................................................... 16
4.9 Serial Port Connectors ....................................................... 17
4.10 Ethernet Connector............................................................. 19
4.11 USB Port............................................................................... 19
4.12 CMOS Data Clear................................................................. 20
4.13 Power and Fan Connectors................................................ 20
4.14 Keyboard/Mouse Connectors ............................................ 21
4.15 System Front Panel Control ............................................... 22
4.16 Watchdog Timer .................................................................. 23
4.17 Audio Connectors ............................................................... 25
4.18 CompactFlashConnector................................................ 25
4.19 Mini PCI Connector ............................................................. 26
4.20 8-bit GPIO Function............................................................. 27

Chapter 5 Award BIOS Setup .................................31
5.1 Starting Setup...................................................................... 31
5.2 Using Setup ......................................................................... 32
5.3 Main Menu............................................................................ 33
5.4 Standard CMOS Features................................................... 34
5.5 Advanced BIOS Features ................................................... 35
5.6 Advanced Chipset Features............................................... 36
5.7 Integrated Peripherals ........................................................ 38
5.8 Power Management Setup ................................................. 40
5.9 PnP/PCI Configurations...................................................... 41
5.10 PC Health Status ................................................................. 42
5.11 Frequency/Voltage Control ................................................ 42
Chapter 6 Driver Installation................................... 43
6.1 Chipset Driver Installation.................................................. 43
6.2 VGA Driver Installation ....................................................... 46
6.3 LAN Driver Installation........................................................ 49
6.4 Audio Driver Installation..................................................... 51
6.5 Touch Screen Driver Installation ....................................... 52
6.6 Wireless LAN Device Driver Installation ........................... 56

Declaration of Conformity -- CE Mark
BOSER Technology hereby acknowledges that compliance testing in
accordance with applicable standards of the EU’s EMC Directive,
89/336/EEC, was successfully completed on a sample of the equipment
identified below:
Equipment Class: Information Technology Equipment
Product Model Series: BPF-3310-Z
This Product Complies With: EN55022: Class A for Radiated emissions
EN50082-2: Heavy Industrial EMC Immunity
We, the undersigned, hereby declare that the equipment specified above
conforms to the above directives and standards.
Manufacturer:
BOSER TECHNOLOGY CO., LTD.

Safety Instructions
The safety recommendations outlined in this section are to be read,
understood and followed before operating the product. Keep this
information in a safe place for future reference. Failure to comply with any
of the following safety procedures could result in serious damage.
Do not operate product for any purposes other than its intended use
This product is intended for indoor use only
Do not operate product if power cord is damaged in anyway
Do not insert objects into openings
Do not immerse product in water or permit liquids to spill inside
Turn off power when unattended or not in use. Unplug product before
moving it or when it is not in use for an extended period of time. The
socket-outlet shall be installed near the equipment and shall be easily
accessible
Do not alter or extend electric plug. Plug is configured for appropriate
electrical supply
Do not overload electrical outlets beyond their capacity as this can result in a
fire
NOTE: DO NOT TOUCH THE PRODUCT OR ANY OTHER SENSITIVE
COMPONENTS WITHOUT ALL NECESSARY ANTI-STATIC
PROTECTIONS.

Life Expectancy of Constituent Parts
This section describes the life expectancy of constituent parts (backlight,
power supply, internal cooling fan and touch screen) which make up to
BPF-3310-Z.
TFT Display Backlight
Display brightness decreases over time with use. The expected operating
lifetime of the backlight time to reach 50% initial brightness) is 30,000 hours
(assuming continuous lit state at 25 degrees C). Actual lifetime result may be
different.
Touch Screen
The operating lifetime of the touch screen is approximately 1 million
operations (as tested by mechanical manipulation under 100g of force at a
rate of two presses per second)

1
Chapter 1
General Description
The BPF-3310-Z is an Industrial Panel PC features anti-vibration
design and is a best cost-effective alternation for users. This precise
streamline platform can be applied to Kiosk, DSA, transaction terminal,
POS, home security system, ATM system and voting machine parking
field and more.
It has a built-in ultra low power consumption Intel® Atom™ N270
processor 1.6GHz is responded to demands of cost-effective panel
system. All of BPF series Panel PC Support resistive touch screens,
highly expandable, it is an ideal for space-limited environments, and
furthermore it supports an optional rotational WLAN antenna for
wireless network connection.

2
1.1 Major Features
The BPF-3310-Z series comes with the following features:
¾Fanless, aluminum front panel design
¾10.4” TFT color panel display w/touch screen
¾Intel® Atom™ N270 processor
¾VGA, Gigabit Ethernet, Audio port
¾2W Stereo Speaker
¾1 x 2.5” SATA HDD space
¾1 x CF, 1 x mini PCI socket
¾6 x COM port, 6 x USB2.0 port
¾COM port voltage output
¾12V DC adapter
¾Option for Wireless LAN module
1.2 Specifications
zSystem
LCD
Size: 10.4”
Max. Resolution: 800 x 600 pixels
Brightness: 250 cd/m2
Max. Color: 262,144 colors
Pixel Pitch: 0.264 x 0.264 mm
Touch Screen
10.4” resistive
SBC Model
HS-8601
CPU
Intel® Atom™ N270 processor 1.6GHz
System Chipset:
Intel® 945GSE/ICH7-M
System Memory
1 x 200-pin SO-DIMM, DDR2 533MHz, Max. 2GB
Display Interface
1 x D-SUB 15-pin
1 x Brightness controller for CCFL
Audio Interface
Audio jack for MIC In, Line Out
2W Amplifier with Stereo Speaker

3
Ethernet Interface
1 x RJ-45 for Gigabit Ethernet
1 x mini PCI wireless LAN module (option)
Storage
1 x 2.5” SATA HDD space
1 x Type II CF socket
Expansion Interface
1 x Type III Mini PCI socket
Watchdog Timer
Software programmable time-out intervals from 1~255 sec. or
1~255 min.
H/W Status Monitor
Monitoring temperatures, voltages status
Power
12V 84W DC adapter with lockable jack
Operating/Storage Temperature
0~+45 degrees C/-20~+70 degrees C
Certification
FCC/CE Class A compliance
IP65 front panel protection compliance
Dimensions
29.2(L) x 22.6(H) x 5.0(W) cm
Cut Out Size
26.1(L) x 19.9(H) cm
zI/O Interface

4
1.3 Dimensions
Dimension measure in cm

5
Chapter 2
Unpacking
After unpacking the Panel PC, place it on a raised surface and carefully
inspect the Panel PC for any damage that might have occurred during
shipment. Ground the board and exercise extreme care to prevent
damage to the board from static electricity.
The BPF-3310-Z delivery package contains the following items:
BPF-3310-Z x 1, w/Power Cable x 1
Utility CD Disk x 1, including User’s Manual
It is recommended that user keeps all the parts of the delivery package
intactness and store them in a safe/dry place for any reasons that
require for returning the product. In case you find any missing and/or
damaged items from the list, please contact your dealer or sale
representatives immediately.

6
This page intentionally left blank.

7
Chapter 3
Chassis Installation
This chapter illustrates how to install components into the Panel PC
system. Please refers to system board’s manual for external interface.
NOTE: If you want to use COM 1(pin-9) to provides +5V power out, please
set the JP3 short 1-2 of system board.
If you want to use COM 2(pin-9) to provides +5V power out, please
set the JP2 short 1-2 of system board.
3.1 HDD Installation
1. Follow the photo instruction to install the HDD onto the HDD
mounting bracket.

8
2. Follow the photo instruction to install the HDD_KIT onto the
chassis.
3.2 WLAN Device Installation
1. User can install the Network antenna module as below.

9
3.3 Back Cover Installation
1. Follow the photo instruction to install the back cover into the
chassis.

10
3.4 Wall Mount Kit
1. Follow the photo instruction to install the wall mount kit into
the chassis.

11
Chapter 4
SBC Installation
This chapter provides the information on how to install the hardware
using the HS-8601. This chapter also contains information related to
jumper settings of switch, and watchdog timer selection etc.
4.1 Before Installation
After confirming your package contents, you are now ready to install
your hardware. The following are important reminders and steps to
take before you begin with your installation process.
1. Make sure that all jumper settings match their default settings
and CMOS setup correctly. Refer to the sections on this chapter
for the default settings of each jumper. (JP7 Îopen)
2. Go through the connections of all external devices and make
sure that they are installed properly and configured correctly
within the CMOS setup. Refer to the sections on this chapter
for the detailed information on the connectors.
3. Keep the manual and diskette in good condition for future
reference and use.

12
4.2 Board Layout
4.3 Jumper List
Jumper Default Setting Setting Page
JP1 CF Use Master/Slave Select: Slave Open 25
JP2 COM 1 Voltage Output Select: RI Short 1-2 17
JP3 COM 2 Voltage Output Select: RI Short 1-2 17
JP4 Panel Voltage Select: +3.3V Short 1-2 14
JP5 Touch Screen Wire Select: 5-Wires Open 14
JP7 Clear CMOS: Normal Operation Open 20
CN12 COM 4 Use RS-232 or RS-422/485 Select:
RS-232 Open 17