BOSS ILLUMINATION MAGNUM 6 User manual

www.bia.lighting | [email protected]page 1 / 2
PRODUCT MANUAL
COPYRIGHT BIA ©2020 V11.20
WARRANTY STATEMENT This product is covered by a 5 year replacement warranty.
BIA guarantees this product to be free of defects from the date of purchase for the stated period above. If product fails within the warranty period, BIA will x
or replace the product. This excludes any costs associated with the removal or installation of product. This warranty is subject to the terms and conditions stated
on www.bia.lighting. Failure to comply with installation guidelines will automatically void the warranty. Please retain purchase receipt. For more information on
warranty please visit www.bia.lighting/warranty
BIA reserves the right to change specications and other information, modify products and discontinue items without prior notication.
PRODUCT VARIANTS
Power : 6W
12W
18W
24W
Dimmable
CCT : 3000K No
4000K No
6000K No
RGB PWM
Beam Angle: 10°
20°
40°
60°
PRODUCT SPECIFICATIONS
Input Voltage : 24V DC
Operating Temperature : -10 to 40°C
Material : Aluminium
MAGNUM
FLOOD LIGHT
Must be installed by
a licensed electrician.
Must be installed
in accordance with
relevant Australian
Standards.
PARTS INCLUDED
LED
Luminaire
IP67
30m Cables
ADDITIONAL INFORMATION
1. Luminaire angle is adjustable. Refer instructions overleaf.
2. Ensure all drivers, cables and joins are sufcient and installed to
the required IP rating.
3. If cleaning maintenance is required, disconnect from mains
supply and allow luminaire to cool. Use a clean microbre cloth,
slightly dampened with a mild dilution of detergent that is PH
neutral, alcohol free and non-abrasive.
4. Do not use harsh chemicals or solvents. Do not use high
pressure cleaners.
5. Care must be taken during installation and maintenance to
prevent accidental damage to the surface of the luminaire.
These damages may result in corrosion.
IK10
SOLD SEPARATELY
Driver
Disclaimer: Please read this product
manual carefully before installing the
product.
Warranty is void if installation
guidelines are disregarded, if the
product has been modied, or if
damage is caused by misuse or
improper installation.
Images, drawings and diagrams are for
illustrative purposes only.
BIA products are manufactured
and certied in accordance with all
mandatory Australian Standards.
Technical data and information subject
to changes. Please visit our website
for latest version.
x1 x1

www.bia.lighting | [email protected]page 2 / 2
PRODUCT MANUAL
COPYRIGHT BIA ©2020 V11.20
RGBW RGBW RGBW
DRIVER CONTROLLER
+
-
+
-
+
-
DRIVER
DIMENSION DIAGRAM
4
3
5
2
93mm50mm
70mm
112mm
Magnum 6
Magnum 18 Magnum 24
Magnum 12
170mm
148mm45mm
148mm
45mm
170mm
214mm
236mm
50mm
4
24V single 24V RGB
INSTALLATION INSTRUCTIONS
1. Before commencing installation, ensure the
main power is switched off.
2. Measure and prepare holes on installation
surface Insert wall plugs.
3. Secure base of luminaire onto the installation
surface with screws.
4. Connect and waterproof cables accordingly.
5. Loosen the nut screws on the sides to adjust
the angle of the luminaire. Tighten to secure
the angle.
6. Turn on main power.
IMPORTANT NOTE!
All connections made must be waterproofed
to the appropriate IP rating for the
application. Warranty is void if connection IP
ratings are not met.