BOSS ILLUMINATION CASTLE II User manual

www.bia.lighting | [email protected]page 1 / 2
PRODUCT MANUAL
COPYRIGHT BIA ©2020 V11.20
WARRANTY STATEMENT This product is covered by a 5 year replacement warranty.
BIA guarantees this product to be free of defects from the date of purchase for the stated period above. If product fails within the warranty period, BIA will x
or replace the product. This excludes any costs associated with the removal or installation of product. This warranty is subject to the terms and conditions stated
on www.bia.lighting. Failure to comply with installation guidelines will automatically void the warranty. Please retain purchase receipt. For more information on
warranty please visit www.bia.lighting/warranty
BIA reserves the right to change specications and other information, modify products and discontinue items without prior notication.
PRODUCT VARIANTS
POWER : 100W
150W
200W
CCT : 3000K
4000K
5000K
PRODUCT SPECIFICATIONS
Input Voltage : 220-240VAC
Beam Angle : Type II
Operating Temperature : -10 to 40°C
Dimming : No
Weight : 3kg to 7.5kg
Material : Aluminium
CASTLE II
FLOOD LIGHT
Must be installed by
a licensed electrician.
Must be installed
in accordance with
relevant Australian
Standards.
PARTS INCLUDED
LED
Luminaire
IP66
ADDITIONAL INFORMATION
1. Luminaire angle is adjustable. Refer instructions overleaf.
2. Ensure all drivers, cables and joins are sufcient and installed to
the required IP rating.
3. If cleaning maintenance is required, disconnect from mains
supply and allow luminaire to cool. Use a clean microbre cloth,
slightly dampened with a mild dilution of detergent that is PH
neutral, alcohol free and non-abrasive.
4. Do not use harsh chemicals or solvents. Do not use high pressure
cleaners.
5. Care must be taken during installation and maintenance to
prevent accidental damage to the surface of the luminaire. These
damages may result in corrosion.
1.5m
AU Plug
Disclaimer: Please read this product
manual carefully before installing the
product.
Warranty is void if installation
guidelines are disregarded, if the
product has been modied, or if
damage is caused by misuse or
improper installation.
Images, drawings and diagrams are for
illustrative purposes only.
BIA products are manufactured
and certied in accordance with all
mandatory Australian Standards.
Technical data and information subject
to changes. Please visit our website
for latest version.
x1 x1

www.bia.lighting | [email protected]page 2 / 2
PRODUCT MANUAL
COPYRIGHT BIA ©2020 V11.20
INSTALLATION INSTRUCTIONS
1. Before commencing installation, ensure the main power is
switched off.
2. Use the luminaire brackets to measure ceiling holes. Drill
holes into the installation surface and insert wall plugs.
3. Mount the bracket onto the prepared holes and secure with
the screws provided.
4. Connect and waterproof cables accordingly.
5. Loosen the nut screws on the sides to adjust the angle of the
luminaire, tighten to secure the angle.
6. Turn on main power.
IMPORTANT NOTE!
All connections made must be waterproofed to the appropriate
IP rating for the application. Warranty is void if connection IP
ratings are not met.
DIMENSION DIAGRAM
100W
Weight: 3kg
150W
Weight: 5.5kg
200W
Weight: 7.5kg
4
3
5
2
280mm 310mm
250mm
446mm
506mm
350mm
85mm 90mm
70.5mm