Bowers & Wilkins CDM 7 User manual

CDM 7
Floor-standing loudspeaker system
Product Summary
●The CDM 7 is an imposing floorstander which not only makes the best of the real wood
veneer finish, but also means extra volume. The 165mm Kevlar® mid/bass combined with
the additional 165mm Cobex® low-frequency driver, delivers a bass response as tactile as
the beautifully crafted cabinets themselves.
Technical highlights
B&W Loudspeakers Ltd reserves the right to amend details of the specifications without notice in line with technical developments. E & OE. All trademarks acknowledged.
www.bwspeakers.com
Description
Drive Units
Frequency Response
Sensitivity
Nominal Impedance
3-way 4th-order vented-box system
1 x 25mm (1in) alloy dome - high
frequency
1 x 165mm (6.5in) kevlar® -
bass/midrange
1 x 165mm (6.5in) Cobex bass
40Hz - 20kHz ± 3dB on reference axis
90dB spl (2.83V 1m)
8 ohms (minimum 4 ohms)
Power Handling
Dimensions
Net Weight
Finish
30 - 150W into 8 ohms on unclipped
programme
Height: 950mm Width: 220mm
Depth: 290mm
18.5kg
Cabinet: Real Wod Veneers, Black Ash,
Cherry, Red Ash
Grille: Black Cloth
Kevlar®: B&W developed and patented the method of using Kevlar® for
loudspeaker cones to reduce unwanted standing waves. DuPont originally
created Kevlar® for use in bulletproof vests.
●B&W's Tweeter on top technology ensures that the sound remains focused
and time-sensitive and that the stereo image is presented with unparalleled
three dimensional accuracy.