Bowers & Wilkins Px7 S2 User manual

Px 7 S2 and Px8
Quick Start Guide
Bowers & Wilkins

Set-up could not be easier:
Just download the App using the link below and follow the instructions.
La configuration ne peut pas etre
plus simple : ii suffit de telecharger
!'application en utilisant le lien ci-dessous
et de suivre les instructions.
Das Setup konnte nicht einfacher sein:
Laden Sie sich einfach die App mit Hilfe des
Unks herunter und folgen Sie den Anweisungen.
-t? •~ 1-- J"'.!l:tft!!f!-C:'t o.1-;Z ""f 0)
1)
/? ~{fffl L T.77'
1)
~?i''r:'.7 / □- ~ L, H:i~1;::f.tE-:,T.< tc i!l \ o
bowerswilkins.com/downloadapp
[L
La configuraci6n no podr1a ser
mas facil: basta con que descargue
la App utilizando el enlace quefigura a
continuaci6n y siga las instrucciones.
La configurazione non potrebbe
essere piu semplice: scarica l'app
usando ii link sotto e segui le istruzioni.
iiflf!~: Rmt:3:ti=t1H!?iT~@JfH¥ff,
#W~i~Bfa.lhtfl=JWoJ o
~ GETITON
p• Google Play
@ ~ @ss
C) C)
_/ fi
I I
/
c:))) ~})
C>II
(}) u=u

G)
'•!.
--7r I. +-;~ -? '
Newproducts
discovered
PX HE ADPH ONES
iOS 12+
Bowers & Wilkins Px
Connect
, , Android 6.0+
,

Fast Pair
In one tap, Px7 S2 and Px8 enable quick, effortless Bluetooth pairing with your Android* devices.
*Android phones running Marshmallow and above/6.0+.
Les Px7 S2 et Px8 permettent un couplage
Bluetooth rapide et sans effort avec vos
appareils Android*.
·Telephones Android avec Marshmallow 6.0+.
Px7 S2 y Px8 permiten el emparejamiento
Bluetooth rapido y sin esfuerzo con sus
dispositivos Android*.
*Telefonos Android con Marshmallow 6.0+.
Px7S2 t:Px 8t;:t , r:7 ::,,$'•y7--C.- ~ ~ < m.i~ i.:
Bluet oot h X: 71 ) ::,,~ t. J'oJ~k tc,: IJ *9o
·"71 1/ i -;z~1J'/6.0t.Z.t ~ffi~Lt~Androidnt;*1niii o
B&W Group Ltd
Dale Road
Worthing West Sussex
BN11 28H England
EU Importer:
Bowers & Wilkins
Beemdstraat 11
5653 MA Eindhoven
The Netherlands
CopyrightC B&WGroup Ltd. E&OE
Px7 S2 und Px8 ermoglichen eine schnelle
und muhelose Bluetooth-Kopplung mit lhren
Android* -Ge rat en.
·Andro1d-Handys mit Marshmallow und hoher/6.0 +.
Px7 S2 e Px8 consentono un accoppiamento
Bluetooth rapido e senza sforzo con ituoi
dispositivi Android*.
·compatibile con Android Marshmallow 6.0+.
R~~~-~' Px7 S2ffiPx8HPoJ~I!XI, J:j
And roidi~~ t~~' ~*~8'9jg~gtjc~ o
*~ffl-=f-Andro1d¥fft*t1f6.0.&.l...X_t.Jt&*o
~ Po ur en savoir plu s :
www .que fa lredem es dechets .fr
1115946 / 2
)t CE UK
- CA

Px8
Wireless
Headphones

2
ENGLISH
www.bowerswilkins.com
Welcome to Bowers & Wilkins and Your Px8 Headphones
Thank you for choosing Bowers & Wilkins. When John Bowers rst
established our company, he did so in the belief that imaginative design,
innovative engineering and advanced technology were keys that could unlock
the enjoyment of audio in the home. His belief is one that we continue to share
and inspires every product we design, tailored for new audio experiences outside
of the home.
The Bowers & Wilkins Px8 are high performance over-ear headphones designed
to deliver the highest quality mobile personal audio experience combined with
the convenience of wireless operation and the serenity of noise-cancellation. This
manual will tell you everything you need to know to get the most from your Px8
headphones.
Your Px8 can play music streamed wirelessly from your mobile phone, tablet or
computer via Bluetooth, or conventionally connected by a jack cable to a suitable
analogue headphone output. Px8 can also play audio via a USB connection from
a computer and can be used for wireless telephony.
Px8 Real World Listening features include our latest innovations in Active Noise
Cancellation, Ambient Pass-Through and enhanced Wear Sensing technologies.
Our latest generation noise cancellation feature delivers an uncompromised
listening experience. Ambient Pass-Through enables external sounds, such as
conversation or safety announcements, to be heard clearly without any need
to remove the headphones. The Wear Sensing feature enables Px8 to respond
naturally, pausing and resuming the music simply by lifting either earpiece on
or off your ear. These features can be enabled and further customised via the
Bowers & Wilkins Music app, available for free on iOS and Android devices.
Px8 incorporates a rechargeable battery. When fully charged, depending on
the degree of Bluetooth, Active Noise Cancellation and Ambient Pass-Through
use, the battery pack can provide up to 30 hours of continuous wireless media
streaming with noise cancellation enabled at average playback volume levels.
ENGLISH

3
ENGLISH
1. Px8 Carton Contents
Px8 over-ear wireless headphones
Storage case
USB-C to USB-C charging cable
USB-C to 3.5 mm audio cable
Document pack
2. Getting to Know Your Px8
We recommend installing the
Bowers & Wilkins Music app on your iOS or Android
device. This allows
you to congure your
headphones in detail and
provides helpful hints and
tips to make the most of
your new headphones.
2.1 Switching Headphones On and Off
Diagram 1 illustrates power switch functionality.
Switching On
The power switch is located on the right earpiece.
Slide the power switch up to the middle position. An
audible cue will be played and the LED indicator will
light up.
Switching Off
Slide the power switch to the bottom position. An
audible cue will be played and the headphones will
power down when the LED indictor is no longer lit.
Bluetooth Pairing
Slide the power switch to the upper position and
hold for 5 seconds to enter Bluetooth pairing mode.
Refer to section 6 for further information on pairing
your headphones to a Bluetooth source.
2.2 Headphone Controls
Diagram 2 illustrates the headphone controls. The
buttons on the right earpiece are used for media
playback and telephony.
Media Playback
Function Action
Play or pause Press the Multi-function button once.
Play next
track
Press the Multi-function button
twice in quick succession. Note:
functionality dependent on source
device.
Play previous
track
Press the Multi-function button three
times in quick succession. Note:
functionality dependent on source
device.
Increase Volume Press the Volume + button.
Lower Volume Press the Volume - button.
Telephony
Function Action
Answer an
incoming call Press the Multi-function button once.
End a call Press the Multi-function button once.
Decline an
incoming call
Hold the Multi-function button for 2
seconds.
Switch between
two calls
With two calls active, press the Multi-
function button twice.
Merge two calls
With two calls active, hold
the Multi-function button for
1 second.
Toggle mute While on a call, press the Multi-
function button three times.
Diagram 2
Headphone controls
Quick Action button Volume -
Volume +
Power switch
Multi-function
Diagram 1
Power switch functionality
2.3 Status Indicator
The status LED indicator is located on the right
earpiece, the table below explains the illumination
states:
Illumination Operational state
White Battery charge > 30%
Amber Battery charge between 30% and 10%
Red Battery charge < 10%
Red ashing Battery charge insufcient for headphone operation
Blue ashing Pairing mode enabled
Blue (2 sec solid) Pairing successful
Blue ashing (calls) Incoming call
Green ashing Rapid charging
Green solid Battery charge full, trickle charging
bowerswilkins.com/downloadapp

4
ENGLISH
3. Intelligent Features
3.1 Environmental Controls
Active Noise Cancellation
Noise cancellation is a series of advanced
technologies that aids in removing undesired
noise from the surrounding environment. The Px8
headphones use built-in microphones to pick up and
cancel out ambient sound for a more comfortable
listening experience.
Note: Noise cancellation requires a good seal
between the headphones and your head for
optimal performance.
Ambient Pass-Through
Px8 also features an ambient “Pass-Through”
mode, which allows in some external sound from
the surrounding environment, allowing safety
announcements or conversations to be heard
without taking the headphones off.
By default, the Quick Action button on the left
earpiece will cycle through the following modes,
but the button can be customised from the
Bowers & Wilkins Music app. See Diagram 2 for
button location.
• Noise Cancelling On
• Pass-Through On
• Noise Cancelling and Pass-Through Off
3.2 Voice Assistance
Your connected device’s voice assistant can be
assigned to the Quick Action button on the left
earpiece from the Bowers & Wilkins Music app.
See Diagram 2 for button locations and section
8.2 on using the Bowers & Wilkins Music app.
3.3 Wear Sensors
Power Saving
Px8 incorporates our latest enhanced wear detection
sensors in both earpieces (see Diagram 3), enabling
intelligent battery conservation by pausing media
playback and entering low power standby mode
when removed from the head. When worn again,
Px8 automatically wakes and connects to the last
connected Bluetooth device.
Playback Control
During media playback, Px8 will automatically
pause when either earpiece is lifted from the ear.
If playback has been paused, placing the earpiece
back on the ear will resume playback.
The standby timer and wear sensor features can be
adjusted from the Bowers & Wilkins Music app.
Note: Take care when wearing your headphones;
hair or accessories trapped between your ears
and the earpieces, or wearing glasses that distort
the prole of your ears, may interfere with the
performance of the wear sensors.
4. Battery Charging and Power Saving
Your Px8 comes with the battery partially charged
and may be used immediately. For best practice we
recommend you fully charge the headphones before
rst use. Please allow up to 2 hours to fully charge.
The headphones can be used while charging.
To charge:
1. Use the supplied USB-C cable and connect
one end to a wall charger or powered
computer port.
2. Connect the other end of the cable to the
USB-C socket on the headphone’s right
earpiece.
Note: During charging, the headphone indicator
will ash green. When fully charged, the indicator
will remain illuminated. See section 2.3 for status
indicator details.
5. Wearing Your Headphones
Wearing your headphones correctly will help ensure
the best possible experience. See Diagram 5.
1. Identify the left and right earpieces by nding
the identication legends located on the interior
of each earpiece.
2. Wear the headphones accordingly with
the headband adjusted so that they rest
comfortably on your head.
Note: Wearing glasses that distort the prole
of your ears may interfere with headphone
performance. Similarly, hair trapped between your
ears and the headphone earpieces may interfere
with the wear sensor performance.
Diagram 4
USB-C cable connection
Diagram 3
Wear sensor location
Diagram 5
Wearing your headphones

5
ENGLISH
6. Bluetooth Connection
6.1 Pairing
Your Px8 headphones are designed to stream media
wirelessly from Bluetooth audio devices, such as
smartphones, tablets or personal computers. To do
so, the headphones and source audio device must
rst be paired.
6.1.1 Pairing iOS System with
Bowers & Wilkins Music App Installed
We recommend adding your headphones to the
Bowers & Wilkins Music app. This allows you to
congure your headphones in detail and provides
helpful hints and tips to make the most of your new
headphones. Please refer to section 8 for details
on installing and using your headphones with the
Bowers & Wilkins Music app.
During the process of connecting your headphones
to the app for the rst time, you will also be
prompted to pair the headphones as an audio
accessory. Tap on the conrmation popup to
complete the pairing process.
6.1.2 Pairing Android Devices Supporting Google Fast
Pair Service (GFPS)
Note: Compatible with Android devices running
Marshmallow 6.0+.
To add your headphones:
1. Switch on your headphones and place them no
further than 10 cm (4 inches) away from your
Android device (with Bluetooth enabled).
2. The rst time you switch on your headphones,
Bluetooth pairing mode will be enabled, the
indicator will ash blue. If pairing mode is not
enabled, please slide and hold the power
switch to the upper (Bluetooth icon) position
for 5 seconds, let go when the indicator blinks
blue and an audible cue is heard.
3. A GFPS (Google Fast Pair Service) notication
will pop up showing that your device has
been detected and request to start the pairing
process.
4. Press the Connect button to enable pairing;
successful connection will be shown in popup.
5. Once paired, the popup will direct you to the
Google Play store to install the
Bowers & Wilkins Music App.
6.1.3 Pairing All Other Devices
1. The rst time you switch on your headphones,
Bluetooth pairing mode will be enabled, the
indicator will ash blue. If pairing mode is not
enabled, please slide and hold the power
switch to the upper (Bluetooth icon) position
for 5 seconds, let go when the indicator blinks
blue and an audible cue is heard.
2. Ensure the Bluetooth feature is enabled on the
audio device, Px8 will appear in the discovery
list; select it to pair.
3. The indicator will ash blue while pairing is in
progress, this will change to solid blue and an
audible cue will play when pairing is successful.
Your headphones will remember up to eight paired
Bluetooth devices. Repeat the above steps to pair
more devices.
Note: Your headphones will automatically exit
Bluetooth pairing mode if no device is paired
within 5 minutes. If pairing fails, the indicator will
rapidly ash blue; please try pairing again.
6.2 Multiple Bluetooth Connections
Px8 can be paired with up to two devices
simultaneously but note that you can only play audio
or take calls from one device at a time.
To switch between two devices:
1. Pause audio on the rst device, or use the
Px8 Multi-function button.
2. Play audio from the second device and the
headphone will automatically switch over.
When streaming audio, receiving a call on the
second device will automatically pause playback on
the rst device and the call will be routed to your
headphones.
You can manage connections in further detail using
the Bowers & Wilkins Music app.
Diagram 6
Bluetooth pairing

6
ENGLISH
7. Auxiliary Connection
In addition to Bluetooth, your Px8 can also connect
to audio sources using the supplied 3.5 mm audio or
USB cables.
7.1 Connecting with the 3.5 mm Audio Cable
The 3.5 mm audio cable enables your Px8 to be
used with a device supporting an analogue output,
such as a conventional headphone socket on
aeroplanes, smartphones or a traditional hi- system.
1. Insert the supplied USB-C to 3.5 mm audio
cable into the headphone’s USB-C socket on
the right earpiece.
2. Insert the other end into the appropriate socket
on your device.
3. Your Px8 will automatically disconnect from any
Bluetooth devices.
Note: Your headphones must have sufcient
charge and be switched on to play audio from an
analogue source device. The volume and play/
pause buttons will not function when you are
using the 3.5 mm interface.
7.2 Connecting with the USB Cable
The USB connection enables your Px8 to function
as a USB sound output device when connected to a
capable computer.
1. Insert one end of the supplied USB-C to
USB-C cable into the Px8 USB-C socket on
the right earpiece.
2. Insert the other end into the appropriate socket
on your computer.
3. Px8 will automatically disconnect from any
Bluetooth devices.
4. Find and select your headphones from the
computer’s audio output control panel.
Note: The headphone battery will also charge
when connected to a capable USB port.
8. Bowers & Wilkins Music App
The Bowers & Wilkins Music app is available for free
on iOS and Android devices and provides extended
setup and adjustments to features such as Active
Noise Cancellation, Ambient Pass-Through and EQ
settings. The app also provides further functions
such as device naming, connection management
and headphone software updates.
bowerswilkins.com/downloadapp
8.1 Connecting Your Headphones to the App
To set up your headphones in the app:
1. From your Android or iOS device, download
and install the Bowers & Wilkins Music app.
2. Ensure your headphones are switched on.
3. Launch the app, then read and follow the
instructions pertaining to app notication and
permissions.
4. The app should detect your headphones
automatically and invite you to set up your
headphones; follow the in-app instructions to
complete the setup process.
5. If your headphones are not detected
automatically, navigate to the Settings page
( icon), tap App product and follow the in-
app instructions.
8.2 Controlling Your Headphones
Commonly used features of your headphones are
accessible directly on the app homepage:
• Battery status
• Environmental controls (Noise Cancellation,
Pass-Through)
• Device connections (refer to the Connections
section below for further details)
8.2.1 Headphone Settings Page
Other settings can be adjusted from the Settings
page. Tap the icon at the bottom of the screen
to enter the Settings page, then select your
headphones from the list.
Environmental Controls
Set the desired environmental control from the
following options:
• Noise Cancelling On
• Pass-Through On
• Noise Cancelling and Pass-Through Off
EQ
Use the Treble and Bass sliders to customise the
tone of your headphones.
Connections
The two most recently connected Bluetooth
devices are shown in the Connections shortcut
buttons. The buttons will appear grey if not currently
connected. Tap the buttons to attempt reconnection.
If only one device is shown, tap ADD DEVICE to
place the headphones into Bluetooth pairing mode
to pair them with a new device.
Tap the CONNECTIONS heading to view more
detailed connection settings, including previously
connected devices (Px8 will remember up to eight
devices).
Once in the Connections page, swipe a device left to
delete a device from the list. Swipe a device right to
make it the preferred device to connect to when the
headphones are switched on.
Toggle Auto-connect to last device to prompt the
headphones to connect to the previously connected
device when they are switched on.
Tap PAIR A NEW DEVICE to place the headphones
into Bluetooth pairing mode and pair them with a
new device.
Quick Action Button
The left earpiece of your headphones features a
button that provides quick access to commonly
used functions. Customise the function of this button
from the app.
• Environmental Controls – each press of the
Quick Action Button cycles through:
• Noise Cancelling On
• Pass-Through On
• Noise Cancelling and Pass-Through Off
• Voice Assistant – press the Quick Action
Button to activate your device’s voice assistant.
Diagram 7
Connecting the 3.5 mm audio cable

7
ENGLISH
Device Management
Toggle Auto standby on to place the headphones
into a power-saving state after 15 minutes of
inactivity.
Toggle Wear sensor on to enable intelligent
playback control; lift an earpiece or remove your
headphones to pause playback. Place them back on
your ears to resume playback.
Rename product
Tap Rename product to choose a new Bluetooth
name for your headphones. Note that devices
already paired with the headphones may still
reference the previous name.
8.3 Headphone Software Updates
Bowers & Wilkins will occasionally make available
software updates that rene and optimise the
performance of your headphones or add new
features. The Bowers & Wilkins Music app will notify
you when a software update is available. Tap on the
notication and then follow the in-app instructions.
9. Power Cycle and Reset
The reboot/reset process may generate noise
in the headphones – do not wear during this
process.
9.1 Power Cycle
To reboot your Px8, remove the headphones
from your head and remove any cables from the
headphones. Simultaneously hold the Volume +
and Volume - buttons for 10 seconds until the
indicator LED extinguishes. Release the buttons
when the indicator lights up again. Rebooting your
headphones will not reset their internal settings or
clear the paired device history.
9.2 Factory Reset
You can clear the paired device history and restore
all settings to their factory defaults. Remove the
headphones from your head and remove any cables
from the headphones. With Px8 powered on,
simultaneously hold the Volume +, Volume - and left
earpiece Quick Action button for 10 seconds until
the indicator LED extinguishes. Release the buttons
when the indicator lights up again; the headphones
will be ready to pair to a device. Alternatively, you
can perform a factory reset from the headphone’s
settings page of the Bowers & Wilkins Music app.
10. Care & Maintenance
10.1 Storing Your Headphones
Taking care of your Px8 will ensure they continue to
deliver the best performance and experience.
When you are not using your headphones,
stow them in the included storage pouch. It is
recommended the headphones are rst powered off.
1. Retract the headband on each side so they are
in the smallest position.
2. With the buttons facing you, rotate the
earpieces inwards so they lay at.
3. Place the headphones into the storage case.
10.2 Cleaning Your Headphones
It is advised that you clean your headphones
regularly. Your Px8 can be cleaned by a soft, damp
microber cloth, gently wipe or dab clean.
The fabric on Px8 has been specially coated with
moisture and stain repellent. If dirt, stain or bre
residue accumulate on the fabric surface, please
clean as instructed above.
• Do NOT aggressively rub or use an abrasive
tool to clean, especially the fabric or leather.
• Do NOT use paper towels, napkins or tissue as
they will leave residue.
• Do NOT use cleaning detergents, soapy water,
polish or chemical cleaners.
• Ensure that no moisture get inside the
earpieces, buttons and interface ports.
11. Support
Should you require further help or advice regarding
your Px8, please visit the Bowers & Wilkins support
site: www.bowerswilkins.com/support.
11.1 Environmental Information
This product complies with international directives,
including but not limited to the Restriction of
Hazardous Substances (RoHS) in electrical and
electronic equipment, the Registration, Evaluation,
Authorisation and restriction of Chemicals (REACH)
and the disposal of Waste Electrical and Electronic
Equipment (WEEE). Consult your local waste
disposal authority for guidance on how properly to
recycle or dispose of this product.

8
ENGLISH
Specications
Wearing Style Bluetooth Wireless Over-Ear Headphones
Technical Features Active Noise Cancellation
Ambient Pass-Through
Wear-Detection Sensor
Bluetooth® audio - Bluetooth 5.2 with aptX™ Adaptive
USB-C charging & audio interface
Bluetooth Codecs aptX™ Adaptive
aptX™ HD
aptX™
AAC
SBC
Bluetooth Proles A2DP
AVRCP
HFP
HSP
BLE GATT (Generic Attribute Prole)
Drive Units 2 x ø 40 mm dynamic full range custom carbon driver
Microphones 4 x mics for ANC
2 x mics for telephony
Input Impedance 33 Ω
Distortion (THD) <0.1% (1 kHz/10 mW)
Battery Type Rechargeable Lithium Ion
Battery Life & Charging 30 hrs Bluetooth with ANC, 7 hrs with 15 min charge, 2 hrs for full charge
Inputs Bluetooth, USB-C audio
In Box Accessories 1.2 m USB-C to 3.5 mm stereo jack audio cable
1.2 m USB-C to USB-C cable
Carrying case
Weight 320 grams without case

Px8 Over-Ear Noise Cancelling
Wireless Headphones
Technical Information

bowerswilkins.com
Px8 Over-Ear Noise Cancelling
Wireless Headphones
Technical Information
Technical Features
Wearing Style
Bluetooth Codecs
Bluetooth Profiles
Drive Units
Microphone
Distortion
Battery Type
Battery Life
Charge
Charge Time
Inputs
In-box Accessories
Dimensions (Carry Case)
Weight
Hybrid Noise Cancellation
Ambient Pass-Through
Wear-Detection Sensor
Bluetooth®audio - Bluetooth 5.2
with aptX™ Adaptive
USB-C charging & audio interface
Bluetooth Wireless Over-Ear Headphones
aptX™ Adaptive
aptX™ HD
aptX™
AAC
SBC
A2DP
AVRCP
HFP
HSP
BLE GATT (Generic Attribute Profile)
2 x ø 40mm dynamic full range custom
carbon driver
4x mics for ANC
2x mics for telephony
<0.1% (1kHz/10mW)
Rechargeable Lithium Ion
30 hours playback
USB-C
2 hours
15 min charge for 7 hours battery life
Bluetooth, USB-C Audio
1.2m USB-C to 3.5mm stereo jack audio cable
1.2m USB-C to USB-C cable
Carry Case
189mm (w) x 63mm (d) x 233mm (h)
320g (without carry case)

Px8
Safety & Warranty
Bowers&Wilkins

English -Important safety instructions
1 Read theseinstructions.
2 Keep these instructions.
3 Heed all warn,ngs.
4 Follow all instructions.
5 Clean onlywith a dry cloth.
6 Only useattachments/accessories specified by the manufacturer.
7 Ensure that the headphones are notworn with, or kept in the immediate
vicinity (closerthan 10cm)of, a pacemaker.
8 Do not Insert headphonejack plugsinto electricpower sockets.
9 Always supe,visechildren us,ng these headphones.
10 Theoperation of switches on yourhi fl system, or the action of plugging-in
the headphones, maycauseaudible clicks which, at high volume levels, may
affect yourheanng. AJways therefore set thevolume control to m,rnmum before
operating switches or ptugging-,n the headphones.
11 Do not useheadphones while driving or cycling.
12 Contains small parts which may be a chokinghazard. Nol suitable for children
aged 3 orunder.
13 This productcontains magneticmaterial.
14 Do not drop, siton, orallowheadphones to beimmersed in water.
15 A-,. Prolonged listening at high volume levels maycause hearing
~ damage.
16 This product is onlydesigned to work at an ambient temperature of up to
40°C.
17 This productcontains I.Jth,um batteries, d misused or damaged this can
become a hazard and is at risk of explosion.
18 Do not handle the product should the batteryleak.
19 Do notincinerate theproduct or leave 111n an extremelyhigh temperature
surrounding environment. This couldresult in theInternal battery exploding or
the leakage of flammable liquid or gas.
20 Do not subject the product to extremely lowa,r pressure. Thiscould result ,n
theinternal batteryexploding orthe leakage of flammable liquid or gas.
21 Do not attempt toaccess or replace the product'sbattery; the battery ,s
internal and notuserserviceable.
22 Refer to the productmanual for information on battery care.
23 Do not expose the product to rain or moisture.
24 Do not use the product near wat er, bathtubs, sinks, saunas, pools or
steam rooms.
25 Turn off the product beforeboarding aira-aft.
26 Do not position or store the product or accessories on ornear a vehicle air
bag; should the airbag exploded there isa risk of injury.
27 Dispose of thisproduct in accordance with localregulations. This product
must not bedisposed of with regularhousehold waste. Disposal of a battery
intofire or a hotoven, mechanicallycrushing or cutting of a batterycan result
in en explOslon.
Compliance markings are located underneath theleft and right removable ear
cush,ons.
For skilled person: CAUTION: Danger of explosion tt battery IS incorrectlyreplaced.
Replace onlywiththe same orequivalent type. Replacement of a battery withan
incorrect typecan defeata safeguard.
Warranty
Bowers & Wilkins products are designed and manufactured to the highest quality
standards. However, tt something does go wrong withthe product, B&W Group
Ltd. and ,ts national distributorswarrant free of chargelabour (exclusions may
apply) and replacement parts In any country served by an offlcial Bowers&
Wilkins d1stnbutor.
This warranty complements any national or regional legal obligations of dealers or
national distributorsand does not affect yourstatutory rights as a customer. Some
regional legal obligatiO<IS outside the control of B&W Group Ltd. mayreduce the
scope or time of the terms outlined below. In particular;
• Special warranty terms apply ,n theRussian Federation.
• Speafic import regulat,ons apply ,n Brazil.
• See reverse ofdocumentforspecific warrantyinstructionsthat apply
,n Australia.
Please contact the relevant national distributorfordetails.
Terms and Conditions
This warranty:
1 is valid onlyforproducts purchased from an authorised Bowers &Wilkins
retailer or dealer.
2 is valid from the dale of purchase for a period of five years for pass,ve
loudspeakers and twoyears forpowered loudspeakers, electronlCS and
headphones, except that exdus,ons apply In certain countries ,n hne with
national law. Please COrlSUtt theBowers & Wilkins d1Stributor In yourcountry for
detailedinformation.
3 is hm1led to the repair ofthe equipment. N01ther transportation, noranyother
costs, nor any risk forremoval, transportation and installation of products IS
covered by this warranty.
4 is only vahd for the original owner. It ,s nottransferable.
5 will not be applicable In casesotherthan defectsin materialsand/or
workmanship atthe llmeofpurchase and will not be applicable:
a for deteroration of componentparts, the nature of which is to become worn
or depleted with use, such as batteries and headphone ear pads.
b for any onleroperabtlityissues with third party products; unless we explicitly
speafythis intent,
c fordamages caused by incorrect installation. connection orpacking,
d for damages caused by any useother than correct use described ,n the
user manual, negligence,modifications, or use of partsthat are not made or
authorised by B&W Group Ltd.,
e fordamages caused by faulty or unsuitableancillary equipment,
f for damages caused by accidents, lightning, water, fireheat, war, public
disturbances or any othercause beyond the reasonable control ofB&W
Group Ltd. and ,tsappointed distributors,
g for productswhose serialnumber has beenaltered, deleted, removed or
madeillegible,
h ifrepairs ormodJfications have been executed by anunauthonsed person
How to claim repairs under warranty
Shouldyou have any concerns regarding the performance of your product, please
use the following procedure:
You can find all contact details by clicking on 'Contact Bowers & Wilkins' at the
bottom of the home page ofour web site and selecting the appropnate country.
2 Ourrepresentat,ve will discussyourconcerns. Ifrt Is found necessary to return
the productfor repair, youmay be gNen a Return Merchandise Authonsation.
You should not return theproduct without this authorisation, ifgiven.
To validate your warranty, you will need lo produce the onginal sales ,nvooce or
otherproof of ownership and date ofpurchase.
Environmental Information
This productcompiles with international direc!JV0S, 1nclud1ng but not hmrted to:
i. theRestricllonof Hazardous Substances(RoHS) Inelectrieal and
electronic equ,pment,
ii . theRegistration, Evaluation, Authorisationand restriction of
CH emlCals (REACH)
ill . thedisposal of Waste Electrical and Electronic Equipment (WEEE).
Consult your local waste disposalauthority for guidance on how property to
recycle ordisposeofthis product.

Australia -Warranty
Subject to the following terms, Sound Unrted will repair or replace any part of anyeligible Bowers & Wilkins product that Is
defectivewithin the warrantyperiod Indicated In the table below orrefund you the cost of the replacement. The benefits to a
consumer given by thiswarranty are In addrt,on to otherrights and remedies of the consumer under a law In relat,on to the goods
or services to which the warrantyrelates.
Eligibility
To claim the benefit of this warranty you must;
1 Be the Original purchaser of a genu ine Bowers & Wilkins product (this warranty Is not transferable)
2 Produce proof of yourpurchase
3 This warranty Is limited to defectsthat arise;
a In the course of normal domestic 1nstallat1on and use and
b within the warranty period identified for the product In the tablebelow, commencing on the date of original purchase.
4 This warrantyexcludes;
a defects arising from misuse. accident. neglectorimproper care, fluctuation inelectrical current, incorrectorfailed
softwareupgrade, damage or malfunct,onfrom incorrect assembly or installation, defectsfrom alteration or modificat,on,
unauthonsed serv,ce orrepair;
b appearance rtems SUCh as cabnetry marks or damage;
c products on wh,ch the senal number has been defaced or removed; and
d claims made laterthan 21 days after the defec t first appears.
5 Note: In makinga claim underthiswarranty, you agreethat If, following r0C0tpt of your claim under this warranty,
Sound United or rts authorised service centredeterminethat yourclaim In respect of a product is 1nval 1d or you haveprovided
false, inaccurate or misleading Information with your claim, Sound United or rts authorisedS8MCe centre may charge you for
any labour, parts or transport costs incurred.
How to Claim
In order to make a claim underthiswarranty, take the following steps:
1 Attach your proof of purchasedocument(s) to the adiacentcard and complete the details.
2 Contact Sound Unrted by telephone or email(contactdetails below)
3 Deliver the product(s) the subject of yourclaim to the Authorised Service Centre nominated by Sound Unrted Details of the
AuthOnsed ServicesCentres areavailable at the belowaddress
4 You must bear any expense you incurIn claiming this warranty.
Notice: Our goods come with guarantees that cannot be excluded under the Australian ConsumerLaw. You areentitledto a
replacement or refund lor a maierfailure and compensat,on for any other reasonably foreseeable loss or damage. You arealso
entitled to have the goods repaired or replaced if the goods fail to be of acceptablequality and the failure does not amount to
a major failure.
Brand Category
Passive Loudspeakers
Active Loudspeakers
Onclud1ng subwoofer and
Bowers & Wilkins Wireless
Music Systems)
Headphones
Accessones
Sound United Sales and Marketing
Suite303, 754 Pacific Highway, Chatswood,
2067 New South Wales, Australia
Tel: [phone]
1nfo-au.bw@soundunrted. com
Warranty Period
5 Years
2 Years
2 Years
1 Year
r X ---------------------------------,
Make: Date of Purchase:
Bowers & Wi l ki ns
Model No.: Where Purchased:
Serial No.:

EU Declaration of Conformity
English
Bowers&Wilkins hereby declares thatthis product Is In compliance with the
essential requirements and other relevant prov,s,ons of Directive 2014/53/EU,
2011/65/EU, andamendment Directive (EU) 2015/863. Thecomplete Declaration
of Conformrty can be found at www.bowerswilkins.com/compliance.
Franc;als
Bowers&Wilkins declare. parla presente, qua ce produ1t estconforme aux
pnncipales exigencesetautres clauses pertinentes de la Directl\/8 2014/53/UE,
2011/65/UE et de la modlficat,on de la Directive (UE) 2015/863. Vous trClUV8<eZ
le texte integral de la DeclaratiOn de conform1te sur le site www.bowerswilkins.
com/compliance.
Deutsch
Bowers&Wilkins erklart hiermit, dass diesesProdukt dengrundlegenden
Anforderungen und anderen relevanten Bestimmungen der Richthnle 2014/53/EU,
2011/65/EU und derAnderungsrichllirne (EU) 2015/863 entspricht. Dievollstandige
Konform1tatserklarung finden Sie unterwww.bowerswilkins.com/compliance.
Espanol
Bowers&Wilkins declara por la presente queesteproductocumplecon t.>s
requIsItos esencialesy otras d1spos1C10t10s relevantes de la Directiva 2014/53/UE,
2011/65/EU yla erirnienda de la Directtva (EU) 2015/863. Puede consultar la
decterac16n de confoonidad completaenwww.bowerswilkins.com/comphance.
Portugues
A Bowers& Wilkins declara por este me,o queesteproduto esta em conform1dade
com osrequisites essencia1s e outras dispoSiQOes relevantes da Diret1va
2014/53/UE, 2011/65/UE ea Diretiva de emenda (UE) 2015/863. A Declara~ao de
Conformidade completa encontra-seem www.bowerswilkins.com/comptiance.
Italiano
Conla presents, Bowers & Wilkins d1chiara cha questoprodottoeconforme a,
requisiti essenziali e ad altredisposizioni pertinent, delta Dlrettiva 2014/53/UE,
2011/65/UEe della D~ettiva dimodifica (UE) 2015/863. La Oichiarazione di
conformrta completa e d1sponibile suwwwbowerswilkins.com/compliance.
Nedertands
Bowers& WIikins verklaart hiert>iJ dat drt productvoldoet aan de essentiele
vere,sten en andere relevante bepal1ngen van richthJn 2014/53/EU, 2011/65/EU en
geamendeerde richtlijn (EU) 2015/863. Decompleteconformite,tsverklaring Is te
widen opwww.bowerswilkins.com/compliance.
Cesky
Spolecnost Bowers & Wilkins lfmto prohla§uje, fe jejiprodukt je v souladu se
zakladnim1 poiadavky a dal§im1 plislu§nym1 ustanovenimi smemice 2014/53/EU,
2011/65/EUa nctvei,zujici sroomice (EU) 2015/863. Piny text prohla§enio shode
naleznetena www.bowersWllkins.com/comphance.
Slovencina
SpolocnosrBowers &Wilkins tymto prehlasuJe. le lentovyrobok 10 v suladeso
zakladnym1 pof1adavkam1 a cfal§imi prislusnyrrn ustanovenIamI smerrnca
2014/53/EU. 2011/65/EUa zmeny smemice (EU) 2015/863. Kompletne vyhlaserne
o zhodenajdete na adresewww.bowerswilkins.com/comphance.
Magyar
A Bowers& Wilkins ezuton kijelenti, hogy a termek megfelel a a 2014/53/EU,
a 2011165/Eu 1ranyelv es az (EU) 2015/863 m6dosit6 iranyelv alapvet6
k6vetelmenye,nek es egyeb vonatkoz6 rendelkezeseinek. A teljes megfelel6seg1
nyilatkozat a k6vetkez6cimen talalhat6:www.bowersw1lkins.com/compliance.
Polski
Firma Bowers & Wilkins niniejszym oswiadcza, ie ten produkt 1est zgodny
z zasadniczymi wymaganiaml iinnymi stosownymi postanowienoamI dyrektyw
2014/53/UE, 2011/65/UE oraz dyrektywy zmienial<lcel (UE) 2015/863 Petrn1
deklarac~zgodnosci moina znaletc pod adresem www.bowerswilkins.com/
compliance.
EJJ.JJvucti
Ms TO nap6v '1 E:TOlpsio Bowers & Wilkins 6,iAWVEI 6n OUT6 TO npo16v
ouµµop(l>WVETOl µi: n, ouo1w6s1, anarn'tos1c; KOi Tl, 6M£:c; oxi:ruct, 610T6~cu:
TWV 0611)11WV 2014/53/EE, 2011/65/EE KOi TllC: TPOTIOTIOl'lTlKl'tC: 06,iyiac; (EE)
2015/863. HTIAl)pri, 61')AwOT) ouµµ6P<1>W011<: slv01 6108tmµ,i OTT1 6m6urnmKl't
61cu8uvOT) www.bowersw1lktns.com/comphance.
PYccK"111
HaCTOAlJ.IVIM KOMn8H ll1 s:l Bowers & Willems 38ABJ1A8T, l.fTO 3TOT npOAYKT OTB0'-i88T
cne4via11bMblM rpe6oeaHll'IR M 1o1 npcr-ti.1M cooreeTCTByK>UlVIM nono:ite:eHviAM
A>1peKrnebl 2014/53/EU, 2011 /65/EU "' ee nonpaaK" (EU) 2015/863. nonHylO
Ae1C11apa4"10 cooraercre"'• MO)l(HO He.:;n, HS ca.:;re www.bowerswilkins.com/
compliance
UK Declaration of Conformity
English
Bowers & Wilkins hereby declares that this productisin compliancewith
theessential requirements and other relevant provisions of Radio Equipment
Regulations 2017 and The Restriction of theUse of Certain HazardousSubstances
in Bectrica and BectronieEquipment Regulations 2012. Thecomplete Declaration
ofConformitycan be found atwww.bowerswilkins.com/en-gb/compliance.
Additional Countries
USA
FEDERAL COMMUNICATIONS COMM ISSION INTERFERENCE STATEMENT
This equipment has been testedand found to complywith thehmijs fora Class B
digital d0V1Ce, pursuant to part 15 ofthe FCC Rules. These limits aredesigned
to provide reasonable protect,on against harmfulinterference in a residential
installation. ThiS equipment generates, uses and can radiate radio frequency
energy and, if notinstalled and used In accordanlCe with the 1nstruct10ns,
maycause harmful 1nterterence to radio communicat,ons. However, there is
no guarantee that interterencewill notoccurin a partJcular 1nstal l at1on. If this
equipment does cause harmful1nterterence to radio or telev,siOn reception, which
can be determined by turning theequipmentoff and on. the useris encouraged to
try tocorrect the ,nterterence by one or more of the following measures:
-Reorient or relocate thereceMng antenna.
-Increase theseparation between the equipment and receiver.
-Connect the equipment intoan outlet ona circuit different from that to which the
receiver is connected.
-Consult thedealer or anexperienced rad,o/TV technician for help.
FCC Caution: Any changes ormodificationsnotexpresslyapproved by the
partyresponsible for compliance could VOid the user's authori1y to operate this
equipment.
IMPORTANT NOTE: FCC Radiation Exposure Statement:The product complies
with the FCC portable RF exposure limit set forth foranuncontrolled env,ronment
and Is safe for intended operation as described in this manual. The further RF
exposure reductiOn can be achieved if the productcan be keptasfar as possible
from the user body or set the d8V1Ce to lower outputpowerif such function is
available.
This transmittermustnot be co-located oroperating In conjunct,on with any other
antenna or transmitter.
This device complieswith Part 15 of the FCCRules. OperatiOn Is subject to the
following twoconditions: (1)This device maynotcause harmful 1nterterence, and
(2) this devicemustaccept any interterence rece,,ved. 1nduding intertererice that
may cau,se undesired operation.
Canada
IndustryCanada statement :
This device contains licence-exempt transmitter(s)/receiver(s) that complywith
Innovation, Science and Economic Development Canada'slicence-exempt RSS(s).
Operation is subject to the following twoconditions:
1. This devicemaynotcause interterence.
2. This devicemust acceptanyinterterence, including interterence that maycause
undesired operation of the device.
L:emetteur/recepteur exempt de licencecontenu dans le present appareil est
conformeaux CNRd·Innovation, Sciences etDeveloppement economique
Canada appllCables auxappareils radio exempts de licence. L'explooatiOn est
autorisee auxdeuxcondrtiOnssuivantes :
1. L:appare,I ne dollpas produ1re de brouillage;
2. L:appareil doit accepter tout brou1llage radioelectrique subi, memesi le
brouillage est susceptibled'encompromettre le fonctionnement.
CANICES-3 (B)/NMB-3(8)
Radiation Exposure Statement :
The product complies with the Canadaportable RF exposure limrt set forth for an
uncontrolledenvironment and Issafe for intended operationas descnbed In this
manual. The further RF exposure reduction can be achieved rt the productcan be
keptas far aspossible from the userbodyorset the device to lower output power
if such function is available.
Declaration d'exposition aux radiations:
Le produ1t est conforme aux limrtes d' exposition pourles apparells portables RF
pourles Etats-Unis et le Canada etablies pour un environnement non contrO!e.
Le prodult est sOr pour un fonctionnement tel quedecrit dansce manual. La
reduction auxexpositions RF peut etre augmentee si l'appareil peut~tre conserve
aussI lo,n que possible du corps de l'utilisateurouquele dispositifestregle surla
puIssance de sortie la plus faible si une telle fonct,on est disponible.

B&W Group Ltd
Dale Road
Worthing West Sussex
BN11 2BH England
EU Importer:
Bowers& Wilkins
Beemdstraat 11
5653 MA Eindhoven
The Netherlands
Copyright <C> B&W Group Ltd. E&OE
~ Pour en savoirplus :
www .quefairedemesdechets. fr
!CE
G
CJ1
co
~
----
<.v
UK
CA