Boya Omic User manual

Ultracompact 2.4GHz
Dual-Channel Wireless
Microphone System
2.4GHz 迷你双通道
无线麦克风系统
Omic
Instruction Manual
使用说明

Statement
Please read this manual carefully before using and strictly operate and store
it in accordance with the instructions. Please save the manual for your future
reference. If you need further assistance than the user manual, please consult
your retailer for help or email us: [e-mail]
Cautions
1. Non-professional teardown is strictly prohibited.
2. Please keep it away from heat sources such as radiators or spotlights.
3. Do not remove the battery without professionals’ help.
4. Please clean the device with only a soft, dry cloth.
5. When using and storing, please keep away from the dust and moisture.
6. For the best pick-up pattern, do not hold your hand against the microphone
capsule cover.
01

General Introduction
The BOYA Omic is an ultra-compact and portable 2.4GHz wireless
microphone system, compatible with computers, Android mobile
devices and more. It features automatic pairing and selectable noise
cancellation, delivering broadcast-quality sound with remarkable ease of
use. The Omic is ideal for content creation, live streaming, vlogging, mobile
journalism and much more.
The USB-C receiver are device powered and have
USB-C charging ports, which support charging and powering of devices
while in use.
The included charging case allows you to charge the transmitter(s)
anywhere, making the Omic kit easy to carry on.
Features
• Also available in 48kHz HD audio when noise cancellation enabled
• Wide-range 20-20,000Hz frequency response - deliver exceptional
high-quality sound
• In-built rechargeable lithium-ion battery provides 5+ hoursofrecording
• USB-C digital output – universal compatibility with
computers and Android mobile devices
• Up to 60m wireless operating range
• Magnetic belt clip is detachable
• The charging case features wireless charging
02

Product Structure
Wireless Transmitter (Omic TX)
① In-built microphone
② Status indicator
Status Indicator
Unpaired Blinking blue quickly
Paired successfully
Static blue
Mute Pulsing red
Noise cancellation
enabled
Static green
Low battery Static red
Charging Blinking red
Fully charged Red light o
③ Power button
• Press and hold to power on or o.
• Press to mute or unmute the
microphone.
• Press twice to enable or disable noise
cancellation.
④ Detachable magnetic belt clip
⑤ Charging contacts
03
1
2
35
4

USB-C Receiver (Omic RXU)
① USB-C connector
It can be connected to Android Smartphones,
Tablets, Computers and other USB-C devices.
② USB-C charging port
When the Omic RXU is plugged into an
external device, the external device can be
powered via this charging port.
NOTE: Most USB-C devices can be powered
and charged through this port while in use.
04
2
1

Charging Case (Omic CC)
①Slot for transmitter(s)
② Slot for receiver
③ Charging contacts
Status Battery Level Indicator
Low battery
＜10%
Charging
≤25%
26≤50%
51≤75%
76≤99%
Fully charged 100%
05
13 3 16
④ USB-C charging port
⑤Wireless charging sector
2
4
⑥ Charging indicator
5

How to use
1. The transmitter(s) will be turned on automatically as soon as it is taken out
of the charging case.
2. Plug the Omic RXU into a USB-C device.
3. Transmitter(s) and receiver will be automatically paired. The indicator of
the transmitter(s) is static blue.
4. Launch a video or audio recording app.
5. Select external microphone, if applicable (app dependent).
6. You are ready to record
Tips:
1. It is recommended to record a sample and play it back to check if the
audio level is acceptable before recording.
2. In order to improve the recording eect in a noisy environment, it is
recommended that press the power button on the transmitter(s) twice at
the same time to enable noise Cancellation.
3. After recording, put the transmitter(s) back into the case for charging.
Note:
Due to 2.4GHz wireless frequency, signal can be easily attenuated. Please try
to avoid obstacles, such as walls and buildings, and avoid close proximity to
devices with 2.4GHz signal, such as high-power Wi-Fi antennas, radios, etc.
06

07
Troubleshooting
If you encounter problems when using the unit, please refer to the following
checklist before contacting technical support. If the problem cannot be
solved, please contact the dealer's after-sales service department.
If there is no sound from the unit or no sound when connected to an
external device
①Make sure the connector on the receiver is well connected to your device.
②Make sure the transmitter(s) is not muted.
Current noise or other abnormal noise appears during monitoring
Make sure there is no interference near the unit. If the noise still exists after
changing the unit's position, please contact our customer service.
The operating range of the unit is limited and the sound is frequently intermittent
Make sure there is no interference between the transmitter(s) and receiver. If the
intermittent sound still occurs frequently, please contact our customer service.
Failed to charge the transmitter(s) via the charging case
①Make sure the charging contacts of both are in full contact. Wipe the
charging contacts with a clean cloth and try again.
②If you want to check whether the magnetic force is aging or whether
the charging contacts of the two are not in sucient contact, press
the transmitter(s) placed in the charging box to check whether it is in
a charging state. If the transmitter(s) is still failed to be charged, please
contact our customer service.

08
Specications
Omic TX Transmitter
Transmission Type 2.4GHz digital frequency
Modulation GFSK
Polar Pattern Omnidirectional
Antenna Ceramic antenna
Operating Range (Without Obstacle) Up to 50m
Distortion ≤0.1%
Frequency Response 20Hz-20kHz
Sampling Rate 48kHz
Bit Rate 16bit
Signal-to-Noise Ratio ≥80dB
Audio Input In-built microphone capsule
Battery Capacity 50mAh
Power Requirements In-built lithium-ion battery/Charging contacts
In-built Battery Life Approx. 5 hours
Charging Time Approx. 2 hours
Weight 15.5g
Dimensions 36×36×9.7mm
Operating Temperature 0°C to +50°C
Storage Temperature -10°C to +50°C

Omic RXD/RXU Receiver
Transmission Type 2.4GHz digital frequency
Modulation GFSK
Polar Pattern Omnidirectional
Antenna Ceramic antenna
Operating Range (Without Obstacle) Up to 50m
Distortion ≤0.1%
Frequency Response 20Hz-20kHz
Reference Audio Input Level -30~-42dBV (MIC input, 0dB gain)
Sampling Rate 48kHz
Bit Rate 16bit
Signal-to-Noise Ratio ≥80dB
Audio Output USB-C digital output
Power Requirements Powered by an external device
Weight 6g
Dimensions 35.5×18.5×10 mm
Operating Temperature 0°C to +50°C
Storage Temperature -10°C to +50°C
09

Omic CC Charging Case
Battery Voltage/ Capacity 3.7V/ 300mAh
Charging Time Approx. 3 hours
Charging Connector USB-C port or wireless charging
Times for Charging Microphone 2 times (2*TX)
Weight 90g
Dimensions 96×46.5×37 mm
Operating Temperature 0°C to +50°C
Storage Temperature -10°C to +50°C
10
Omic-D
2×Omic TX Transmitter
1×Omic RXD Receiver
2×Fur Windshield
1×USB-A to USB-C Cable
1×Omic CC Charging Case
1×Carrying Pouch
Omic-U
2×Omic TX Transmitter
1×Omic RXU Receiver
2×Fur Windshield
1×USB-A to USB-C Cable
1×Omic CC Charging Case
1×Carrying Pouch
In the Box

11
声明
请在使用前仔细阅读本手册，并严格按照说明进行操作和存储。请妥善
保存好说明书以供将来参考。如果用户手册不能帮助您解决某些问题，
请向零售商寻求帮助或给我们发送电子邮件：
[email protected]
注意事项
1. 请勿擅自拆开机壳；
2. 请勿将本机靠近热源，如散热器、聚光灯或其他产生热量的设备；
3. 电池不可自行更换；
4. 请使用柔软的干布清洁本设备；
5. 在使用和储存时，请注意防尘和防潮。
6. 为获得最佳拾音效果，请勿将手放在麦克风咪头上。

12
概述
博雅 Omic 是一款迷你便携的 2.4GHz 无线麦克风系统，兼容电脑、
Android 移动设备等。产品具有自动配对和可设置的降噪功能,可
提供出色的广播级音质，易于使用，适用于内容创作、直播、Vlog 拍摄、
移动新闻等应用场景。
USB-C 接收器由外接设备供电，并带有USB-C充电口，
支持一边录制一边给设备充电。
充电盒可为发射器提供移动电源，便于出行携带。
特点
• 双击降噪，48kHz 高清音质
• 20-20,000Hz 频响范围，高品质还原真实声音
• 内置可充电锂电池续航长达 5 小时，综合充电盒达 15 小时
• USB-C 数字输出——兼容电脑、Android 移动
设备等
• 无线操作距离达 50 米
• 磁吸背夹可拆卸
• 充电盒支持无线充电

13
产品结构
无线发射器（Omic TX）
① 内置麦克风
② 状态指示灯
状态 指示灯
未联机 蓝灯快闪
联机成功 蓝灯常亮
静音模式 红灯呼吸闪烁
降噪开启 绿灯常亮
低电量提示 红灯常亮
充电中 红灯闪烁
充满电 红灯熄灭
③ 电源键
长按开 / 关机；短按开启 / 关闭静音
模式；双击开启 / 关闭降噪功能。
④ 可拆卸磁吸背夹
⑤ 充电触点
1
2
35
4

14
USB-C 接收器（Omic RXU）
① USB-C 接头
可接入安卓手机、平板或其他带 USB-C
接口的设备。
② USB-C 充电孔
当 Omic RXU 接收器插入外部设备时，
可通过此充电端口为外部设备充电。
注意：此 USB-C 充电口支持给大部分
USB-C 设备充电。
2
1

15
充电盒（Omic CC）
① 发射器凹槽
② 接收器凹槽
③ 充电触点
④ USB-C 充电孔
⑤ 无线充区域
状态 电量 指示灯
低电量提示 ＜ 10%
充电中
≤ 25%
26 ≤ 50%
51 ≤ 75%
76 ≤ 99%
充满电 100%
13 3 162
4
⑥ 充电指示灯
5

16
状态 电量 指示灯
低电量提示 ＜ 10%
充电中
≤ 25%
26 ≤ 50%
51 ≤ 75%
76 ≤ 99%
充满电 100%
使用方法
1. 发射器从充电盒中取出将自动开机；
2.将Omic RXU插
入带 USB-C 接口的设备；
3. 发射器和接收器将自动完成配对，发射器指示灯呈蓝灯常亮；
4. 启动视频或音频录制应用程序；
5. 若应用程序适用，请选择外置麦克风；
6. 开始录音。
提示：
1. 建议在正式录音前做个简短的录音测试，检查音频水平是否可以接受。
2. 若录音环境嘈杂，还可以双击发射器电源键开启降噪模式，提高录制效果。
3. 录制结束后，可将发射器放入充电盒中进行充电。
注意：由于在 2.4GHz 频谱下，信号很容易受干扰，请尽量避开墙壁
和建筑物等障碍物，避免接近 2.4GHz 频率的设备，如大功率 Wi-Fi
天线、收音机等。

17
故障排除
在使用本机的过程中出现任何问题，请参照以下内容加以解决。如果此
手册仍然无法解决您遇到的问题，请与我们当地的经销商售后服务部联
系。
产品无声音
① 检查产品是否连接正常以及接头是否有松动。
② 请验证发射器是否开启了静音模式。
监听时有不干净的电流声或异常噪音等
请检查本机附近是否有干扰源；若本机更换使用位置后还是有噪音，请
联系客服咨询。
产品的使用距离受限且声音频繁断续
查看发射器、接收器之间是否有干扰源，将产品更换使用位置再次确认，
若声音还是频繁断续，请联系客服咨询。
充电盒无法给发射器充电
① 检查充电触点是否接触不到位，可用干净的布擦拭充电触点后再次进
行验证。
② 检查磁力是否老化、充电触点是否接触不到位，可通过手按压发射器
验证其能否进入充电状态。若仍然无法充电，请联系客服咨询。

18
参数
Omic TX 发射器
传输方式 2.4GHz 数字频段
信号调制 高斯频移键控
极性模式 全向型
天线类型
操作距离（无障碍） 50 米
失真 ≤ 0.1%
频率响应 20Hz-20kHz
采样率 48kHz
位深度 16bit
信噪比 ≥ 80dB
音频输入
内置咪头
内置电池容量 50mAh
供电方式 内置锂电池供电 / 充电盒触点充电
续航时长 约5小时
充电时长 约2小时
重量 15.5g
尺寸 36×36×9.7mm
工作温度 0℃ ~+50℃
贮存温度 -10℃ ~+50℃
陶瓷天线

19
Omic RXD/RXU 接收器
传输方式 2.4GHz 数字频段
信号调制 高斯频移键控
极性模式 全向型
天线类型
操作距离（无障碍） 50 米
失真 ≤ 0.1%
频率响应 20Hz-20kHz
采样率 48kHz
位深度 16bit
信噪比 ≥ 80dB
音频输出
USB-C 数字输出
供电方式 外接设备供电
重量 6g
尺寸 35.5×18.5×10mm
工作温度 0℃ ~+50℃
贮存温度 -10℃ ~+50℃
陶瓷天线