Rockville RWM65U User manual

Problem Solution
No sound or faint
sound
•Verify all sound system connections or adjust
channel volume as needed.
•Verify that the receiver is connected to the mix-
er/amplier.
•Turn on microphone.
•Make sure the batteries are installed correctly.
•Charge or change battery.
•Make sure AC adapter is securely plugged into
electrical outlet.
•Make sure receiver is powered on.
Audio artifacts or
dropouts
•Change receiver and microphone to a different
group and/or channel.
•Identify nearby sources of interference (cell
phones, Wi-Fi access points, signal processor,
etc...) and shutdown or remove source.
•Charge or change microphone battery.
•System must be set up within recommended
range and receiver kept away from metallic
surfaces.
•Microphone must be used in line of sight from
receiver for optimal sound.
Distortion Reduce microphone channel volume.
Sound level
variations when
switching to dif-
ferent sources
Adjust microphone volume as necessary.
Transmitter
information does
not appear on the
Receiver LCD
Microphone is off.