Boyo VTB-100 Installation manual

VIVID TV BOX
VTB-100
Operation Manual
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

Introduction
The compact unit easily turns your LCD, CRT monitor, plasma display or projector into a
multimedia center. ith a built-in TV tuner and multiple video ports, you can connect
DVD players, digital cameras, VCRs or even game consoles. It provides S-video,
composite (RCA) video connectors, audio pass-through and front-panel headphone
support.
ith advanced scaling technology, the unit provides 3:2 pull down correction that
eliminates jitter from DVD movies that originated from motion picture films. Motion and
adaptive de-interlacing also improves the clarity and sharpness of the overall image
producing sharp, clear, saturated images.
Users can also adjust contrast, brightness, color, hue and channel from the remote control
and on-screen menu.
Precautions
1. Do not expose this product to direct sunlight.
2. Keep the unit away from radiator, heat sources and magnetic field.
3. Do not place it in very dusty or humid locations.
4. Use this unit in a horizontal position only.
5. Do not put heavy objects on top of the converter.
6. Put the unit in an open space that has good ventilation.
7. If the unit is acting abnormally keep the unit away from TV or other electronic
equipment.
8. Unplug the unit from the power supply when it is not to be used for a long period
of time.
Features
•Stand-alone, Plug-n-Play. No software drivers required and no messy PC installation
routines.
•No PC compatibility problems & special firmware design for some famous PDPs
(Plasma Displays).
•Built-in TV tuner, support up to 125 channels with Fine Tuning function.
•Provide user-friendly OSD (on screen display) to control functions.
•Automatic source standard detection (NTSC/PAL/SECAM for video or S-Video).
•Auto-scan air/cable TV channels, channel rename, and channel editing functions.
•Full screen TV display, support VGA (640x480), SVGA (800x600) and XGA
(1024x768) display resolution.
•DE-INTERLACE function provides can provide high quality pictures with sharp &
stable image output to VGA/DVI out.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

•Localized TV system menu selection.
•Compatible for multi-signal inputs: TV tuner, Video, S-Video, Component (Y, Cb,
Cr) & VGA.
•Support Sleep Timer Setting.
•Available in NTSC/Multi-PAL (BG, DK, I)/SECAM model.
•Re-mapping function for programming your favorite channels.
•Fully functional infrared remote control.
•Supports 3:2 pull-down for film mode.
•Supports MTS for NTSC system & NICAM for PAL.
•Supports 15pin D-Sub graphic card (VGA in); 15pin D-Sub monitor (VGA out) and
DVI Monitor (DVI out).
•Supports Teletext (optional) for PAL
•Supports protection of Channel setting: V-Chip (optional) for NTSC system/USA.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

Front Panel
1. POWER
Pressing this button to switch the unit On or Off.
. VIDEO SOURCE SELECTION
Select the video source between TV/Cable, S-Video, AV,
Component (Y, Cb, Cr) or PC
3. POWER LED / INFRARED RECEIVER
Lights when the TV BOX is powered up and ready to operate. Receive the Infrared
signal from the remote control
4. : Decrease the sound volume
5. : Increase the sound volume
6. : : Adjust channel decrease
7. : Adjust channel increase
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

Rear Panel
1. DC In- Connect to a 12V power supply.
. VGA Out- Connect your 15 Pin Monitor to the VGA output.
3. VGA In- Using the 15 pin VGA cable provided, connect one side to the VGA
output on your pc and the other side to the VGA In of your unit.
4. Video-In -Please connect the external video from VCR, LD/VCD/DVD or video
game console to the Video In port.
5. S-Video- Please connect it to the S-Video In port when the external Video device is
S-Video.
6. Component (Y, Cb, Cr) Input- Please connect them to the Component (Y, Cb Cr)
In port when the external video device has Y, Cb, Cr Output’s support.
7. RF In (VHF/UHF)- Please connect your RF cable to RF IN port to receive antenna
or cable TV signal.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

Side Panel
1. Line In- Connect the audio from sound card to Line In port. Thus you should be
able to have sound from PC/external speakers even when your TV Box is in stand-
by mode.
. Line Out- Connect the Line Out to your PC/external speakers.
3. AUDIO (R&L) In- Please connect the external audio to the Audio In port.
4. DVI Out (Optional)- Use the DVI Cable (male to male) to connect to DVI
supported Monitor or other video devices.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

Connection and Installation
1. To prevent damage to your equipment due to ground potential
influence, make sure that all devices on the installation are properly
grounded. Consult your dealer for technical details if necessary.
2. Please turn off the power of all devices before connection.
To install the unit for the analog TV and A/V device connection, please refer to the
diagram below.
Notes:
* Audio/Video connection: For audio connection, pleas use RCA audio (LTR) connector.
For video connection, please choose either RCA video connector or S-Video connector.
* Moreover, for connection to a stand alone, please omit those connections associated
with PC.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

Operation Instruction
Initial Settings
For all function settings of the unit, you can use the supplied remote control unit.
Please refer to the following steps below:
1. Install 2 AAA batteries into the Remote Control.
2. Power on the unit or press the Power button on the Remote Control
3. Press the “Source” button to select signal source.
4. Press the “Autoscan” button to scan and memorize all the channels.
5. After the auto scan is finished, please press channel “+”,”-“ or channel number keys
to select channels.
6. Press the “Menu” button and the OSD Main Menu window appears.
7. Press or , to select the OSD Sub Menu.
8. Press “ENTER” for the he selected Sub Menu
9. If you don’t want to select the Sub MENU, press” EXIT” button.
Source Select Setting
Source Select Sub-Menu provides TV, AV, S-VIDEO, YCbCr and PC mode selections.
1.In the SOURCE Sub Menu, press or button to choose the Video Source; TV;
AV; S-video; YCbCr; PC.
2. Press “ENTER” to select the source.
3. Press “EXIT” to return to the Main “MENU”.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

PICTURE setting
Picture Sub-Menu provides BRIGHTNESS, CONTRAST, COLOR, TINT,
SHARPNESS adjustment modes AND RESET.
1. In the Picture Sub-MENU, PRESS or button to choose the required item.
2. Press or button to adjust the selected item.
3. Press ENTER to confirm the setting.
4. Select Reset to clear all adjustments and return to factory settings.
5. hen finished making all picture adjustments, press the “Exit” button to return the
main menu.
SOUND Setting
The SOUND Sub-Menu provides BASS, TREBLE, BALANCE adjustment modes and
the RESET mode.
1. In the SOUND Sub MENU, Press or button to choose the required item.
2. Press “Enter” to select the item.
3. To adjust the selected item by and button.
4. hen finished, press “Exit” to return to SOUND Sub MENU.
5. Select RESET to clear all adjustment and return to factory setting.
6. hen finished, press the “Exit” button to return to the Main MENU.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

TV FUNCTION Setting
TV Function sub-menu provides different function selections for the NTSC and PAL
models. Please refer the following diagrams.
NTSC PAL
NTSC system
Select AIRCATV, CHANNEL EDIT, FINETUNE and AUTO SCAN by pressing the
button, and then pressing “ENTER” to confirm the setting.
PAL system
Select CHANNEL SWAP, CHANNEL RENAME, CHANNEL EDIT, FINETUNE,
AUTO SCAN and VIDEO STANDARD by pressing the button, and then pressing
“ENTER” to confirm the setting.
1. AIRCATV (for NTSC model only)
Before scanning channels, please select appropriate frequency tables among AIR
ANTENNA) and CATV Cable).
To scan program channels automatically, press the AUTOSCAN button. The unit can
auto detect the TV system. After finishing AUTOSCAN, the scanned program channel
will be saved.
. Channel Swapping (for PAL model only)
Press or and “Enter” button to enter the CHANNEL SWAP function.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

The Original column remains the present channel number. Key in the channel number
you like to swap at the TARGET column.
For example, if you want to change the channel 11 to channel 22. Press the number key
on the remote control unit. After key in the number 22, the channel 11 will be swapped
with the channel 22.
3. Channel Rename (for PAL model only)
The CHANNEL RENAME function allows you to edit the channel’s name. After you
edit the channel name, it will shows below the channel number. This function is only
available when you select your frequency table to “CATV” in AIRCATV function.
Press or and “Enter” button to enter the CHANNEL RENAME function.
After entered the CHANNEL RENAME function, the Channel List dialog will show up.
Press the button to select the channel you want to rename then press “Enter” to enter
the channel rename dialog.
The CHANNEL RENAME function provides 5 characters for user’s edit. Press the
to select the character, press to move to the next character you want to change.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

After you have entered the channel name, press “Enter” then the channel name will be
saved.
The channel list will depend on the channels you’ve scanned. The scanned channel will
be marked with a check, which means this channel is available.
All the channels will be listed on the channel list screen. Each screen shows 10 channels.
You can press to move to the next page.
The channel list will depend on the channels you’ve scanned. All the channels will be
listed on the channel list screen. Each screen shows 10 channels. You can press to
move to the next page.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

4. Channel Editing
Select the “CHANNEL EDIT” function on the TV Function Screen by pressing the or
button. Then press the “Enter” button to entry the function.
Press or to select “ADD” or “ERASE” functionality.
Adding a channel.
For example to add CH 60Use the Remote Control unit, to select CH 60, then enter
the TV function sub-menu, press or button to enter the CHANNEL EDIT.
And then press or button to access ADD, and confirm ADD by pressing the
“ Enter “ button on your Remote Controller.
Erasing a channel
For example to Erase CH 60
Use the Remote control unit, to select CH60, and then enter the TV function sub-
menu, press or button to enter CH Edit and then press or
button to access ERASE, and confirm Erase by passing the “ Enter “ button on your
Remote Controller.
After Adding/Erasing a channel, press the “Exit” button to return to the TV function
sub-menu. hen you have finished Channel Editing; press the ”Exit” button again to
return to the main menu.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

5. Fine Tuning
Press or and “Enter” button to enter the FINE TUNE function. Press or to
fine-tune the frequency of the current channel to make it clear, then press “ Exit “ to
return to TV Function sub-menu once finished.
6. Video Standard
Press or and “Enter” button to enter the VIDEO STANDARD function. The
VIDEO STANDARD function is to precisely lock up the right channel during the
AUTOSCAN process.
Please refer the Appendix B to select the standard in your country.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

RESOLUTION Setting
The RESOLUTION Sub-Menu provides 640 X 480, 800 X 600, 1024 X 768 modes.
1. To enter “1024 x 768”,“800 x 600”, “640x480”resolution, press or button
to select one of them, then press “Enter” to confirm the setting and Exit to main menu
OSD FUNCTION Setting
The OSD FUNCTION Sub-Menu provides OSD POSITION, OSD COLOR settings.
1. In the OSD Function Sub Menu, use or to select the item required.
2. Press the “Enter” button to choose the “OSD POSITION”, another “OSD
POSITION” sub-menu appears, Use or button to move the position
of menu position on the display. After setting, press the “Exit” button to return to
the OSD function Sub-Menu.
3. Press “Enter” button to choose the “OSD COLOR”, using the or button to
choose your favorite OSD color. After setting, press “Exit” to return to the OSD
function sub-Menu.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

System Setting
The System Setting Sub Menu provides users to set the best display setting for their
Plasma displays.
For the best video quality and performance for the Plasma displays, user can select the
plasma manufacturer manually by “OUTPUT SELECT “ function. Press the and the
“Enter“ button to select the “OUTPUT SELECT” function.
Choose the brand name of your plasma manufacturer by pressing the and the
“Enter” button. Select the “Default” item if you connect to a LCD monitor or you want
to restore the default value after you adjusted the display output values on ACTIVE
PIXEL / ACTIVE LINE / TOTAL PIXEL / TOTAL LINE functions. Return to the
SYSTEM SETTING Sub Menu; press the “Exit” button.
hen you don’t find any suitable display settings in the OUPUT SELECT function,
choose the following functions to set the display values manually. Please notice that the
functions are for the advanced users.
The ACTIVE PIXEL / ACTIVE LINE functions provide users to fine-tune the vertical
and horizontal display values of the plasma display.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

Press button on the remote control to adjust the display screen values.
The TOTAL PIXEL / TOTAL LINE functions provide users to fine-tune the vertical
and horizontal display values of the TV BOX.
Press button on the remote control to adjust the output display values of TV Box.
To restore the default value, please choose the “DEFALUT” item in the OUTPUT
SELECT sub menu.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

Remote Control Handset Functions
1. POWER
Powers the unit on and off.
. SOURCE
Selects the video source between TV/cable, AV, S-video and YCbCr (Component).
3. PC/AV
Switches the AV and PC modes.
4. MODE
Adjusts the video resolution – 1024x768, 800x600, 640x480
5. DISPLAY
Displays current setting information on your screen.
6. BAND
Press the button to switch AIR or Cable system. For NTSC system only.
7. AUTOSCAN
Scan program channels automatically and save scanned channels.
8. SLEEP
Automatically switches off the TV Box as desired; 5, 10, 15, 30, 60, 90 minute options.
9. CH ADD
Adds the current channel, which you lose from the TV cable.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

10. CH ERASE
Press the button to erase the current channel, which you don’t like to see.
11. FINE TUNE -
Tunes the TV channel signal down by continuous clicking the button.
1 . FINE TUNE +
Tunes the TV channel signal up by continuous clicking the button.
13. MENU
Press the button to pop up the OSD MENU
14. Arrow Buttons
Press the “Arrow” button to choose the items on the main menu or Sub-menu.
Press button to choose item on the menu or to move the
OSD position.
15. EXIT
Exits the current menu selection and return to the previous menu. Press this key
repeatedly to close all items.
17. ENTER
Selects the currently highlighted menu item or to confirm the setting.
19. C.C (This function is only supported by USA/NTSC area)
Enables / disables the closed caption function.
1. V.CHIP (This function is only supported by USA/NTSC area)
Locks the channel for security considerations.
. TTX ON / TTX OFF (for Most Pal system regions)
Activates the Teletext menu. / Press the button to disable the Teletext menu. This key is
to enable/disable the Teletext function.
3. REVEAL
Displays the hidden text in Teletext page when suggested and the text will disappear
automatically in 6 seconds.
4. PAGE –
Pages down the Teletext index menu.
5. PAGE +
Press the button to page up the Teletext index menu.
6. R/G/Y/B
The Red, Green, Yellow, Blue color buttons corresponds to the option line
at the bottom of Teletext index menu. Not functional when there is no Teletext
service available.
7. NUMBER KEYS
Selects the channel or key in the values.
8. CH + / -
Click to switch the channel forward and back.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

9. VOL + /-
Click to turn the volume louder or lower.
30. CH RTN
Press the button to return the last channel.
31. MUTE
Mutes the volume.
3 . MTS
Enables the MTS function in NTSC system. If you are in Pal system area, press this
button to execute the “Nicam” stereo function.
33. FAVORITE
Press the button to switch on the “Favorite Channel”
34. FAV.SET
Sets the current channel to “Favorite Channel”.
35. SURROUND
Activates the surround effect.
36. LOUDNESS
Enhances the volume setting
37. STATIC
Enables Interlace Mode
38. SPORTS
Enables De-interlace Mode
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv