60g
66 X 35 X 12mm
DC 12~24V
50M (MAX.)
2400~2483.5MHz
4.4 (20dB BW)
16QAM,QPSK,BPSK
+14dBm@16QAM EVM 5%,
+18dBm@QPSK EVM 8%
-72dBm@QAM, -85dBm@QPSK
O O O O
-10 C~+50 C/14 F~122 F
15%~85%RH
60克
66 X 35 X 12mm
DC 12V@250mA; DC24V@150mA
DC 12~24V
50M (MAX.)
2400~2483.5MHz
4.4 (20dB BW)
16QAM,QPSK,BPSK
+14dBm@16QAM EVM 5%,
+18dBm@QPSK EVM 8%
-72dBm@QAM, -85dBm@QPSK
1Vp-p±0.2
Model: VTX300D
Wireless transmitter box: X 1
Wireless receiver: X 1
Waterproof case: X1
Cigarette Lighter Adapter: X1
Power Supply Cable: X1
(pre-assembled
on the TX box)
Warranty Card x 1
Registration Card x 1
User's Manual x 1
Wireless Receiver
Wireless boxTransmitter
Wired camera(Optional)
Wireless Transmitter
Wired camera
Wireless Receiver
Display or Monitor
Black line
Red line
Power input
(Connected with a
cigarette lighter)
Indicator
Antenna
Connect the vehicle
power supply
Bracket
Camera Lens
Transmitter
Receiver
USER S MANUAL VTX300D Digital Wireless Transmitter + Receiver box
Camera
(optional)
TransmitterReceiver
Unobstructed Effective Range
Unobstructed Effective Range
Power Supply
Weight
Receiving Sensitivity
Weight
Dimensions (W X D X H)
Receiving Sensitivity
Power Supply
Video output
Dimensions (W X D X H)
Operation Humidity
Operation Temperature
Transmission Power
Transmission Power
Modulation/Demodulation Mode
Modulation/Demodulation Mode
Consumption Current
Transmission Frequency
Transmission Frequency
Data Bandwidth
Data Bandwidth
Packing List: Specifications:
Product Structure: Installation Wired Camera:
Video Output
Video Input
Pairing
Video Output
Indicator
Antenna
Pairing
1.Choose a location close to the rear clearance
lights, so you can easily splice the power and
ground connections.
2. Use a screwdriver to the first screw is screwed
into the screw hole of the drilled.
3. Move the camera orientation to adjust
the display effect.
4. After adjustment, second screw drill, mount and
tighten the screws, the camera is installed.
Wiring diagram and the pairing setting:
Wired camera+Wireless :Transmitter
Rear
lamp
Wireless receiver:
Cigarette lighter
power supply
Video input
Pairing: To pair the TX Box and RX Box successfully, please follow the instructions below accordingly:
1. Press and Hold the Pairing Button on the TX Box for 3sec. The indicator light will start flashing.
2. Within 30sec of flashing time, Press and Hold the Pairing Button on the RX Box for 3sec until the indicator light flashes.
3. Once both TX Box and RX Box are successfully paired, the indicator lights on TX Box and RX Box will stop flashing.
Wireless Receiver
Wireless Transmitter
Note:
1. The system requires 12VDC Power.
2. Recommend Professional installation
from an aftermarket customizer shop.
3. Avoid high temperature and high
pressure location when wiring.
Note: Align the antenna vertically for optimum performance
Pairing Button Pairing Button