Brady QuickLabel GlobalMark 2 Applic Parts list manual

Pipe Markers Signs and Labels Pictograms
Application Card Guide

Introduction
The QuickLabel Application Card allows you to print pre-made labels provided on a compact flash card with
your Brady GlobalMark®2 Sign and Label Maker. Print pipe markers, signs, labels, and pictograms directly
from your GlobalMark2 printer, without the need for a PC. The ready-to-print format is error-free and
hassle-free, and the text is editable for customization.
Easily print the signs and labels you need:
1. Select the QuickLabel icon from the launch screen.
2. Enter the corresponding label ID number from this
application guide OR select “Browse.”
3. Scroll through the list to select your category, select
“Next,” then select your template while previewing your label.
4. Print to your GlobalMark2 printer.
5. To print a different label, select the green arrow
to return to the “Select Label” screen.
■Your label automatically scales to the tape width installed
in the printer.
■Black frames will not print unless you enable them.
■All saving and editing functionality in QuickLabel is the
same as the GlobalMark2 printer.

Pipe Markers
501 – Style 1 HV
502 – Style 1
503 – Style 4
Style 1 HV 4" Style 1 2.25" Style 4 1.125"
Pipe Markers
To edit the text, select your label and double click on the text on your screen. Use the “Edit Screen” to make your changes. Select “OK.”
Style Dimensions
504 – Style 1 HV
505 – Style 1
506 – Style 4
507 – Style 1 HV
508 – Style 1
509 – Style 4
510 – Style 1 HV
511 – Style 1
512 – Style 4
513 – Style 1 HV
514 – Style 1
515 – Style 4
516 – Style 1 HV
517 – Style 1
518 – Style 4
519 – Style 1 HV
520 – Style 1
521 – Style 4
522 – Style 1 HV
523 – Style 1
524 – Style 4
525 – Style 1 HV
526 – Style 1
527 – Style 4
528 – Style 1 HV
529 – Style 1
530 – Style 4
531 – Style 1 HV
532 – Style 1
533 – Style 4
534 – Style 1 HV
535 – Style 1
536 – Style 4
537 – Style 1 HV
538 – Style 1
539 – Style 4
540 – Style 1 HV
541 – Style 1
542 – Style 4
543 – Style 1 HV
544 – Style 1
545 – Style 4
546 – Style 1 HV
547 – Style 1
548 – Style 4
549 – Style 1 HV
550 – Style 1
551 – Style 4
552 – Style 1 HV
553 – Style 1
554 – Style 4
General
555 – Style 1 HV
556 – Style 1
557 – Style 4
558 – Style 1 HV
559 – Style 1
560 – Style 4
Note: To print black frame, select “Label Properties” (F3 on keyboard). Select the “Frame” tab, then select your line width. See screen example on last page of Pipe Markers section.

561 – Style 1 HV
562 – Style 1
563 – Style 4
564 – Style 1 HV
565 – Style 1
566 – Style 4
567 – Style 1 HV
568 – Style 1
569 – Style 4
595 – 4" x 12"
596 – 2.25" x 7"
597 – 1.125" x 7"
598 – 0.5" x 2.25"
599 – 4" x 12"
600 – 2.25" x 7"
601 – 1.125" x 7"
602 – 0.5" x 2.25"
603 – 4" x 12"
604 – 2.25" x 7"
605 – 1.125" x 7"
606 – 0.5" x 2.25"
607 – 4" x 12"
608 – 2.25" x 7"
609 – 1.125" x 7"
610 – 0.5" x 2.25"
611 – 4" x 12"
612 – 2.25" x 7"
613 – 1.125" x 7"
614 – 0.5" x 2.25"
615 – 4" x 12"
616 – 2.25" x 7"
617 – 1.125" x 7"
618 – 0.5" x 2.25"
619 – 4" x 12"
620 – 2.25" x 7"
621 – 1.125" x 7"
622 – 0.5" x 2.25"
623 – 4" x 12"
624 – 2.25" x 7"
625 – 1.125" x 7"
626 – 0.5" x 2.25"
637 – 1.125" x 7" 638 – 1.125" x 7"
570 – Style 1 HV
571 – Style 1
572 – Style 4
573 – Style 1 HV
574 – Style 1
575 – Style 4
576 – Style 1 HV
577 – Style 1
578 – Style 4
589 – Style 1 HV
590 – Style 1
591 – Style 4
592 – Style 1 HV
593 – Style 1
594 – Style 4
Arrows
Pipe Markers
Style 1 HV 4" Style 1 2.25" Style 4 1.125"
Style Dimensions
General continued
To edit the text, select your label and double click on the text on your screen. Use the “Edit Screen” to make your changes. Select “OK.”
Note: To print black frame, select “Label Properties” (F3 on keyboard). Select the “Frame” tab, then select your line width. See screen example on last page of Pipe Markers section.

Medical Gas Pipe Markers
Semiconductor and Chemical Pipe Markers
627 628 629 630 631
632 633
639 640 641 642
643 644 645 646
To edit the text, select your label and double click on the text on your screen. Use the “Edit Screen” to make your changes. Select “OK.”
1.125" x 7"
Style Dimensions
0.5" x 2.25"
Style Dimensions
Note: To print black frame, select “Label Properties” (F3 on keyboard). Select the “Frame” tab, then select your line width. See screen example on last page of Pipe Markers section.

Label Properties Menu F3 on keyboard
To print black frame, select “Label Properties” (F3 on
keyboard). Select the “Frame” tab, then select your
line width.

Signs and Labels
Signs and Labels
To edit the text, select your label and double click on the text on your screen. Use the “Edit Screen” to make your changes. Select “OK.” All
multi-colored headers will appear as a solid black rectangle on GlobalMark2 MonoColor models.
ENTER BY
PERMIT ONLY
301 – 4" x 6" 302 – 4" x 6" 303 – 4" x 6" 304 – 4" x 6" 305 – 4" x 6" 306 – 4" x 6" 307 – 4" x 6"
308 – 4" x 6" 309 – 4" x 6" 310 – 4" x 6" 311 – 4" x 6" 312 – 4" x 6" 313 – 4" x 6" 314 – 4" x 6"
315 – 4" x 6" 316 – 4" x 6" 317 – 4" x 6" 318 – 4" x 6" 319 – 4" x 7" 320 – 4" x 7"
Admittance, Exit, and Confined Space
EXIT EXIT
Note: To print black frame, select “Label Properties” (F3 on keyboard). Select the “Frame” tab, then select your line width. See screen example on last page of Pipe Markers section.

Signs and Labels
326 – 4" x 6" 327 – 4" x 6" 328 – 4" x 10" 329 – 4" x 10" 330 – 4" x 10"
331 – 4" x 6" 332 – 4" x 6" 333 – 4" x 4" 334 – 4" x 6" 335 – 4" x 6" 336 – 4" x 6"
Alert and First Aid
Alert and First Aid continued Chemical and Hazardous Materials
Admittance, Exit, and Confined Space continued
FIRE EXIT
321 – 4" x 14" 322 – 4" x 14" 323 – 4" x 6" 324 – 4" x 6" 325 – 4" x 6"
FIRE EXIT
To edit the text, select your label and double click on the text on your screen. Use the “Edit Screen” to make your changes. Select “OK.” All
multi-colored headers will appear as a solid black rectangle on GlobalMark2 MonoColor models.
Note: To print black frame, select “Label Properties” (F3 on keyboard). Select the “Frame” tab, then select your line width. See screen example on last page of Pipe Markers section.

351 – 4" x 10" 352 – 3" x 5" 353 – 3" x 5" 354 – 2.25" x 5" 355 – 2.25" x 5" 356 – 2.25" x 5" 357 – 3" x 5"
Electrical Hazard and Lockout
LOCK
OUT
FOR
SAFETY
!
344 – 6" x 4" 345 – 6" x 4" 346 – 3" x 5" 347 – 4" x 6" 348 – 4" x 6" 349 – 4" x 6" 350 – 8" x 4"
Arc Flash And
Shock Hazard
Do not operate controls or
open covers without
appropriate personal
protection equipment
Failure to comply may
result in injury or death!
Refer to NFPA70E for PPE requirements.
Riesgo de Arco
Electrico y Descarga
No opere mandos o abra cublertas
sin el equipo de proteccion
personal apropiado.
Fracaso de cumpiir puede
terminar en herida o muerto.
Refiere a NFPA70E para requistos de EPP.
337 – 3" x 5" 338 – 3" x 5" 339 – 3" x 5" 340 – 3" x 5" 341 – 4" x 6" 342 – 6" x 4" 343 – 8" x 4"
Arc Flash and Shock Hazard
Appropriate PPE Required
Do not operate controls or open covers
without appropriate personal protection
equipment
Failure to comply may result in injury or death!
Refer to NFPA 70E for minimum PPE requirements.
Arc Flash and Shock Hazard
Appropriate PPE Required
Do not operate controls or open covers
w
ithout appropriate personal protection
e
quipment
Failure to comply may result in injury or death!
Refer to NFPA 70E for minimum PPE requirements.
Arc Flash And
Shock Hazard
Do not operate controls or
open covers without
appropriate personal
protection equipment
Failure to comply may
result in injury or death!
Refer to NFPA70E for PPE requirements.
Riesgo de Arco
Electrico y Descarga
No opere mandos o abra cublertas
sin el equipo de proteccion
personal apropiado.
Fracaso de cumpiir puede
terminar en herida o muerto.
Refiere a NFPA70E para requistos de EPP.
To edit the text, select your label and double click on the text on your screen. Use the “Edit Screen” to make your changes. Select “OK.” All
multi-colored headers will appear as a solid black rectangle on GlobalMark2 MonoColor models.
Note: To print black frame, select “Label Properties” (F3 on keyboard). Select the “Frame” tab, then select your line width. See screen example on last page of Pipe Markers section.

NO SMOKING
UNLESS YOU’RE ON FIRE
366 – 4" x 6" 367 – 4" x 6" 368 – 4" x 6" 369 – 4" x 6" 370 – 4" x 6" 371 – 6" x 4" 372 – 4" x 6"
Funny Signs
Fire
358 – 4" x 6" 359 – 4" x 6" 361 – 4" x 14" 362 – 4" x 14"
FIRE
EXTINGUISHER FIRE EXTINGUISHER
363 – 4" x 6" 365 – 4" x 10"
364 – 14" x 4"
To edit the text, select your label and double click on the text on your screen. Use the “Edit Screen” to make your changes. Select “OK.” All
multi-colored headers will appear as a solid black rectangle on GlobalMark2 MonoColor models.
Note: To print black frame, select “Label Properties” (F3 on keyboard). Select the “Frame” tab, then select your line width. See screen example on last page of Pipe Markers section.

No Smoking
385 – 4" x 6" 386 – 4" x 6" 387 – 4" x 6" 388 – 6" x 4" 389 – 4" x 6"
Machine and Operational
LOOK OUT FOR
LIFT TRUCKS
373 – 4" x 6" 374 – 4" x 6" 375 – 4" x 6" 376 – 4" x 6" 377 – 4" x 6" 378 – 4" x 6"
379 – 4" x 6" 380 – 4" x 6" 381 – 4" x 6" 382 – 4" x 6" 383 – 4" x 6" 384 – 4" x 6"
WATCH FOR
LIFT TRUCKS
To edit the text, select your label and double click on the text on your screen. Use the “Edit Screen” to make your changes. Select “OK.” All
multi-colored headers will appear as a solid black rectangle on GlobalMark2 MonoColor models.
Note: To print black frame, select “Label Properties” (F3 on keyboard). Select the “Frame” tab, then select your line width. See screen example on last page of Pipe Markers section.

Inspection/Write On
402 – 0.5" x 2" 403 – 0.5" x 2"
Warning Stakes / Portrait
399 – 14" x 3" 400 – 14" x 3" 401 – 14" x 3"
Protective
390 – 4" x 6" 391 – 4" x 6" 392 – 4" x 6" 393 – 4" x 6" 394 – 4" x 6" 395 – 4" x 6" 396 – 4" x 6"
397 – 4" x 6" 398 – 4" x 6"
Conduit and Voltage
411 – 2.25" x 9" 412 – 2.25" x 9"
416 – 1.125" x 4" 417 – 1.125" x 4"
408 – 2.25" x 9" 409 – 2.25" x 9" 410 – 2.25" x 9"
413 – 1.125" x 4" 414 – 1.125" x 4" 415 – 1.125" x 4"
To edit the text, select your label and double click on the text on your screen. Use the “Edit Screen” to make your changes. Select “OK.” All
multi-colored headers will appear as a solid black rectangle on GlobalMark2 MonoColor models.
Note: To print black frame, select “Label Properties” (F3 on keyboard). Select the “Frame” tab, then select your line width. See screen example on last page of Pipe Markers section.

Pictograms
Pictograms
Mandatory
001 002 003 004
015 016
014
012 013
020 021
018
019
017
007 008 009
005 006
011
010
025 026
022 024023
Note: Not recommended for 0.50" width tapes.

Pictograms
029
027 030
028
034 035
042
040
038 039
031 032 033
Personal Protection Equipment
036 037
041 044 045
043
Note: Not recommended for 0.50" width tapes.

046 047 048 049 050 051 052
053 054 055 056 057 058 059
060 061 062 063
Packaging
Prohibition
064 065 066
Note: Not recommended for 0.50" width tapes.

Prohibition continued
Signal Words
067 068 069 070 071 072 073
074 075 076 077 078 079
080 081 082 083 084 085 086
Note: Not recommended for 0.50" width tapes.

087 088 089 090 091 092 093
094 095 096 097 098 099
100 101 102 103 104 105
Signal Words continued
Warning
106
Note: Not recommended for 0.50" width tapes.

Warning continued
107 108 109 110 111 112 113
114 115 116 117 118 119 120
121 122 123 124 125 126
Note: Not recommended for 0.50" width tapes.

BLS850 Laminating System
Brady Worldwide, Inc.
6555 W. Good Hope Road
Milwaukee, WI 53223
1-888-272-3946
www.bradyid.com
Brady Canada
355 Apple Creek Blvd.
Markham, ON L3R 9X7
1-800-263-6179
www.bradycanada.com
© 2007 Brady Worldwide, Inc. All Rights Reserved Printed in U.S.A. 05-07
QuickLabel Application Card Guide
Use the Brady BLS850
Laminating System to:
■turn your GlobalMark2
label into a rigid plastic
or aluminum sign.
■apply laminate to one side
and adhesive to the other,
creating laminated documents
that can be easily mounted.
The small, portable desktop
laminator works without
electricity, heat, or messy
chemicals, and the cut-off
blade provides a precise
trim to finish documents.