Brady BBP 33 User manual

BBP®33 Sign & Label Printer Quick Start Guide 11
Quick Start Guide
Unpacking
Verify that all of the items shown are in the box. If an item is
missing or appears to be defective, contact Brady technical
support immediately.
Included in the Box
Components
Installation and Setup
Refer to the User’s Manual, located on your product CD for
more detailed information.
Connecting Power
1. Remove printer and power cord from packaging box.
2. Plug power cord into printer and into AC power outlet. Printer
automatically powers on.
3. After initial start, press Power to apply or remove power.
Installing Media
1. Open enclosure cover.
2. Release ribbon latch and swing ribbon cover open.
3. Move yellow media wiper away from media.
4. Move yellow media guides to full-open.
5. Insert media cartridge until spindle ends rest in slots of media
holder (touch cell is on left-side of cartridge).
6. Feed media from top of roll until it sits just past the black
rubber roller.
7. Close media guides until they touch edge of media liner with
media under the guides. Arrows on the guides should line up
with edge of liner.
8. For continuous media, move media wiper into position so it
rests on media.
Installing Ribbon
1. Place ribbon cartridge with ribbon over print head (product
label toward machine), then snap into place.
2. Close and latch ribbon cover, then close enclosure cover.
• Printer • USB Cord
• Product CD • Quick Start Guide
• Printer Driver CD • Cleaning Kit*
• Power Cord *Not available in all regions.
• Accessories Kit
1 Enclosure Cover 2 Label Exit/Auto Cutter*
3 Media Guides 4 Media
5 Ribbon Cartridge 6 Ribbon Cover
7 Ribbon Cartridge Latch 8 Brady Network Card
9 Expansion Ports 10Media Wiper
11 Power button 12Media Bridge*
13Ribbon Cover Latch
*See User’s Manual for component descriptions.
7
2
5
10
49
6
1
3
11 12
8
13
3
6
4
5
1

BBP®33 Sign & Label Printer Quick Start Guide 12
User Interface
The user interface (UI) contains the display screen, the power
button and navigation keys for selecting options and moving
through the menu tree. The UI consists of:
Display Screen
The display has two modes, Ready and Menu Selection Mode.
When you power on the printer, the Ready state automatically
displays.
Ready Mode
Displays printer status, media supply and ribbon part numbers
and amount remaining.
Menu Selection Mode
When the menu button is pressed, the Menu displays, showing
options for setting or selecting printer functions.
Using Menus
1. From Ready screen, press .
2. To navigate through the menu, use:
Printing a Label
Create and print labels from your label-creation software. When
the job is done, cut the labels using the cutter on the printer.
Technical Support
Product Registration
All Rights Reserved.
www.bradycorp.com
©2012 Brady Worldwide, Inc.
Item # Icon Description
1Power: Applies or removes printer power.
2Menu: Displays the menu tree screen.
3Navigation Keys (arrows): Used to select
menu options, move through menu tree and
exit the menu.
4Feed: Feeds media through the printer.
5Display Screen
1
42
3
5
Icon Description
Scroll through menus.
WExit or move up a menu level.
XMenu support key.
Select an option or go to a submenu.
www.bradyid.com (Americas)
www.bradyeurope.com (Europe)
www.bradycorp.com (Asia Pacific)
www.bradyaust.com.au (Australia)
www.bradycanada.ca (Canada)
www.bradylatinamerican.com (Latin America)
www.bradycorp.com/register
www.bradyaust.com.au/register (Australia)