BrainLit Alven User manual

BRAINLIT ALVEN - QUICK GUIDE
A1x Alven luminaire
B 1x Alven pole
C 1x Alven foot
D 8x Assembly bolts
E 1x Torx key
F 1x Power cord
G 1x Document folder
including:
Lay the pole (B) on a stool or chair
horizontally to avoid damage,
approximately 70 cm above
surface as pictured below.
Attach the foot (C) to the bottom
end of the pole (B) with four of the
eight bolts (D) in the numbered
order using the torx key (E).
Connect the wire with quick
connector from the luminaire (A) with
the matching from the pole (B), make
sure they are firmly connected and
that latching hooks have connected
properly.
Thread the luminaire (A) over the pole
(B) and make sure that all cables are
running free into the pole (B) and
they are not damaged.
Attach the luminaire (A) to the top
end of the pole (B) with the
remaining four bolts (D) in the
numbered order using the torx key (E).
NOTE: Please take care not to pinch or damage the wires.
Raise your Alven to a standing
position with its foot on the floor.
Insert the power cable (F), first to
your Alven and then to the wall
outlet.
It will take about 2 minutes for
your Alven to start once the power
cord has been connected.
Alven can be connected to a
network using wifi or ethernet
cable.
STEP 1
Attach luminaire to pole
Connect power
Alven user manual
Warranty & safety booklet
1. Remove all packaging
materials.
2. Unpack and inspect all
components.
3. Lay out all parts on a flat
surface.
Before assembly
A B C
D
E
F
G
For indoor
use only
E
D
A
B
F
BOX 1 BOX 2 BOX 3
STEP 2
STEP 3
Welcome to the world of BioCentric Lighting™
Two people recommended
for assembling and
moving your Alven
PAGE 1 OF 2
www.brainlit.com
2
14
3
BrainLit Alven is the world’s first personal, connected and dynamic BioCentric
Lighting™ system in a free-standing LED luminaire. It instantly alters the
emotional character of its environment and delivers a more natural light to its user.
Alven’s AutoLit recipe provides optimal light conditions for aligning your circadian
rhythm. The light conditions can be further adjusted through the BrainLit app. With
the app, you can choose e.g. the “Boost” scene to receive a light shower for extra
energy.
Attach foot to pole
B
C
DE
1
2
34
B
C
TURN PAGE FOR OPERATING INSTRUCTIONS

BRAINLIT ALVEN - QUICK GUIDE
STEP 4
STEP 5
STEP 6
PAGE 2 OF 2
www.brainlit.com
Use the power button to
power your Alven On/Off.
Use +/- buttons to dim the
light up or down.
Do not look directly into the
Alven lamp. It is brighter
than a normal lamp and
may cause discomfort.
For more features, see
instructions in the user
manual or in the app.
Complete the setup of your Alven
by downloading the BrainLit app
from the App Store or Google Play
and follow the instructions.
Start system
Complete setup
You’re all set! Welcome to the world
of BioCentric Lighting™. Scan the
QR code for the full documentation
to view more features. SCAN FOR MANUAL
Finished
AutoLit
The AutoLit recipe with 100% intensity is the
default setting that best helps you maintain
your circadian rhythm. The circadian rhythm
is referred to as our ”biological clock” that
regulates our well-being, alertness and sleep.
To maintain your normal circadian rhythm,
you should use AutoLit with 100% intensity as
often as possible.
Please note that if you change from AutoLit
or dim down the light intensity, the BioCentric
Lighting effect will decrease. We recommend
using AutoLit with 100% intensity.
It may take a few days for your eyes to adapt
to the brightness of your Alven.
To activate AutoLit recipe
1. LONG press (3 sec) Power
2. Power LED blinks slowly
3. Within 7 sec SHORT press Power =
recipe is changed to AutoLit
To activate Boost scene
1. LONG press (3 sec) Power
2. Power LED blinks slowly
3. Within 7 sec SHORT press DimUp =
scene is changed to Boost
To activate Relax scene
1. LONG press (3 sec) Power
2. Power LED blinks slowly
3. Within 7 sec SHORT press DimDown =
scene changes to Relax
Boost
Boost increases your alertness and stimulates your
cortisol levels, giving you a refreshing effect.
Recommended usage is a 20 minutes or shorter
”light shower”, preferably during the first half of
Usage of Boost at night may disturb your natural
circadian rhythm. To maintain your natural
circadian rhythm, you should use AutoLit with
100% intensity as often as possible.
Relax
Relax creates a natural light environment that
feels more neutral to your eyes but does not
change dynamically and therefore has less
impact on your circadian rhythm. Recommended
usage is for shorter time periods after 14.00. To
maintain your circadian rhythm you should use
AutoLit with 100% intensity as often as possible.
1LONG press
2SHORT press
1LONG press 2SHORT press
1LONG press
2SHORT press
AutoLit Demo - Shows the variation
and dynamics of the light
1. LONG press (3 sec) Power
2. Power LED blinks slowly
3. Within 7 sec LONG press (3 sec) DimUp
4. Demo of AutoLit is running
5. Power LED blinks fast and Bluetooth LED is
OFF when demo is running
Demo will last for approximately 90 sec.
Bluetooth pairing - How to pair your phone
with your BrainLit Alven
1. LONG press (3 sec) Power
2. Power LED blinks slowly
3. Within 7 sec LONG press (3 sec) DimDown
4. Power LED is ON and Bluetooth LED blinks
slowly when pairing is active
Bluetooth pairing is active for 60 sec. Follow instructions on your
phone or mobile device to complete pairing.
122
LONG press LONG press
1LONG press
LONG press
RECIPES & SCENES
Power LED
Bluetooth LED
TURN PAGE FOR ASSEMBLY INSTRUCTIONS
the day (08.00-14.00).