Brandt BPI6413BM Quick start guide

GUIDE FOR INSTALLATION AND USE EN
Cooking hob
BPI6413BM
BPI6414BM

2
Dear Customer,
You have just acquired a BRANDT product and we would like to thank
you.
We have designed and made this product with you, your lifestyle and
your requirements in mind so that it meets your expectations. We
have devoted our know-how, our innovative spirit and the passion that
has been guiding us for over 60 years.
In an effort to ensure that our products meet your requirements in the
best possible way, our Customer Relations department is at your
disposal, to answer all your questions and to listen to all your
suggestions.
Visit our website www.brandt.com where you will find our latest
innovations, as well as useful and complementary information.
BRANDT is delighted to assist you every day and hopes you get the
most out of your purchase.
Important: Before using your appliance, read this user guide
carefully to familiarise yourself more quickly with its operation.

3
TABLE OF CONTENTS EN
• Safety guidelines_______________________________________ 4
• Care for the environment________________________________ 7
• Description of your appliance_____________________________ 8
1 / INSTALLING YOUR APPLIANCE
• Choice of location ______________________________________ 9
•Fitting ______________________________________________ 9
•Tips for flush mounting _________________________________ 10
• Case of flush mounting above draws, cupboards
or an oven _____________________________________________ 10
• Case of flush mounting above a dishwasher_________________ 12
• Electric connection _____________________________________ 13
• Gas connection ________________________________________ 14
• Changing of gas supply _________________________________ 16
2 / USING YOUR APPLIANCE
• Description of the worktop_______________________________ 19
• Switching on the gas burners ____________________________ 20
• Cookware suitable for the gas burners _____________________ 21
• Switching on the induction cooking plates __________________ 22
• Child safety feature: Locking/Unlocking_____________________ 22
• Description of controls __________________________________ 23
• Setting the timer_______________________________________ 23
• Choosing induction safe cookware_________________________ 24
3 / MAINTAINING YOUR APPLIANCE
• Maintaining your appliance ______________________________ 26
4 / SPECIAL MESSAGES, INCIDENTS
• During use __________________________________________ 27
5 / COOKING CHART
• Induction cooking guide _________________________________ 28
• Gas cooking guide _____________________________________ 29
6 / SOME TIPS ________________________________________________ 29
7 / PERSONAL NOTE __________________________________________ 30
8 / AFTER SALES SERVICE ____________________________________ 32

SAFETY GUIDELINESEN
— We have designed this
cooking hob for use by private
individuals in their homes.
—This appliance must be
installed in compliance with
currently applicable
regulations and used only in a
well-ventilated location.
Consult this guide before
installing and using your
appliance.
— All cooking should take
place under your surveillance.
— These cooking hobs are
intended exclusively for
cooking beverages and
foodstuffs and do not contain
any asbestos-based materials.
— This appliance is not
connected to a device for
evacuating combustion
products. It must be installed
and connected in compliance
with the regulations in force.
Particular attention must be
given to the guidelines
concerning ventilation.
— Do not store cleaning
PRODUCTS or FLAMMABLE
PRODUCTS (aerosol cans or
pressurised containers, as
well as papers, cookbooks,
etc.) in the cabinet
underneath your cooking hob.
— If you use a drawer located
under the hob, we
recommend that you avoid
storing in it items that are
heat sensitive (plastic, papers,
aerosol cans, etc.).
— Your hob should be
disconnected from power and
fuel supplies (electricity and
gas) before any repairs.
— When you connect the
power cables of any electrical
appliances plugged in close to
the hob, ensure that they are
not in contact with the
cooking zones.
— As a safety measure, do not
forget to close the general
supply tap for gas distributed
by pipe or the tap of the tank
for butane or propane gas
after use.
— The CE compliance mark is
affixed to these hobs.
— Installation should only be
performed by installers and
qualified technicians.
— Prior to installation, ensure
that the local distribution
conditions (nature of the gas
and pressure of the gas) and
the setting of the appliance
are compatible.
— It must be possible to
disconnect the appliance from
the power supply, either using
a plug or by fitting a switch on
the fixed wiring system in
accordance with installation
rules.
— The electrical plug must
remain accessible after
installation.
— Do not use a steam cleaner.
— It is recommended to avoid
placing metal objects such as
knives, forks, spoons and lids
on the cooking surface, as
they may heat up.
IMPORTANT SAFETY INSTRUCTIONS - READ
CAREFULLY AND RETAIN FOR FUTURE USE.
This user guide is available for download on the brand’s
website.
4

5
SAFETY GUIDELINES EN
— Do not use recipients that
overhang from the edge of
the cooking hob.
— This appliance may be used
by children aged 8 years and
older, and by persons with
impaired physical sensorial or
mental capacities, or without
experience or knowledge, if
they are supervised or have
received prior instructions on
how to use the appliance
safely and have understood
the risks involved. Children
must not be allowed to play
with the appliance. Cleaning
and maintenance operations
must not be carried out by
children without supervision.
— Children must be
supervised to prevent them
from playing with the
appliance.
— This hob is compliant with
standard EN 60335-2-6
relating to the heating of
cabinets and the Class 3
standard with regard to
installation (as per standard
EN 30-1-1).
— Residual heat: A cooking
zone can remain hot for
several minutes after use. An
“H” is displayed during this
period. Avoid touching the hot
areas during this time.
- Child safety feature: your
hob has a child safety feature
which locks it when it is off or
during cooking (see section:
“Use of child safety”).
Do not forget to unlock it
before using the hob again.
— After use, turn off the cook
top using its control device
and do not rely on the
saucepan detector.
WARNING
— The conditions for
setting this appliance are
described on the label
inside the bag or on the
rating plate.
— To consult the
references of your
appliance easily, we
recommend that you note
them on the “After sales
Service and Customer
Relations” page (this page
also explains where to
find them on your
appliance).
— WARNING: If a crack
appears in the surface of
the glass, disconnect your
appliance from the power
supply to avoid electric
shock.
— WARNING: The
appliance and the
accessible parts of it will
become hot during use. Be
careful not to touch the
heated elements. Children
under the age of 8 years
must not be allowed to
touch the appliance,
unless they are supervised
continually.
— Never use aluminium
foil for cooking. Never
place products wrapped in
aluminium foil or in
aluminium trays onto your
hob.
The aluminium will melt
and permanently damage
your appliance.

6
SAFETY GUIDELINESEN
— If the power cable is
damaged, it should be
replaced by the manufacturer,
its after-sales service
department or by a similarly
qualified person in order to
avoid danger.
— It is recommended to avoid
placing metal objects such as
knives, forks, spoons and lids
on the cooking surface, as
they may heat up.
— After use, turn off the cook
top using its control device
and do not rely on the
saucepan detector.
— This unit is not intended to
be operated using an external
timer or a separate remote
control system.
— WARNING : It is
dangerous to cook with oil or
fat if the hob is left
unattended, as this may cause
a fire. Do not attempt to
extinguish a fire with water
but switch off the appliance,
then cover the flame with a lid
or a fire blanket.
— The use of a gas cooking
appliance produces heat and
humidity in the room where it
is located. Ensure that the
kitchen is well-ventilated:
keep mechanical ventilation
orifices open.Intensive and
prolonged use of the
appliance may require
additional ventilation, for
example opening a window, or
more efficient ventilation, for
example by increasing the
power of the mechanical
ventilation if present.
— WARNING:
Only use hob
protectors designed by
the manufacturer of these
cooking appliances or
recommended by the
manufacturer in the user
guide included with the
appliance. Use of
unsuitable protectors
could cause accidents.
Only use protection
systems designed by the
manufacturer of the
cooking appliance or
systems mentioned by the
manufacturer of the
appliance in the user
guide for the intended
use, or use the protection
system integrated into the
appliance. Use of
unsuitable protection
systems could cause
accidents.
Fire hazard: Do not
store objects on the
cooking surfaces.
— CAUTION: The cooking
process must be
monitored. A short
cooking process must be
continuously monitored.
— CAUTION:When not
monitored, cooking on a
cooking plate with fat or
oil can be dangerous and
may cause a fire.
We do not recommend using
any hob protection
mechanism.
If the power supply lead is
damaged, it must be replaced
by a H05V2V2F cable and
three 1 mm2conductors.

7
SAFETY GUIDELINES EN
— This appliance’s packaging
material is recyclable. Help
recycle it and protect the
environment by dropping it
off in the municipal
receptacles provided for this
purpose.
— Your appliance also
contains a great
amount of recyclable
material. It is marked
with this label to
indicate that in countries that
are a members of the
European Union the used
appliances should not be
mixed with other waste. This
way, the appliance recycling
organised by your
manufacturer will be done
under the best possible
conditions, in compliance with
European Directive
2002/96/EC on Waste
Electrical and Electronic
Equipment. Contact your
town hall or your retailer for
the used appliance collection
points closest to your home.
— We thank you doing your
part to protect the
environment.
ENVIRONMENTAL PROTECTION
This appliance is designed to
be installed on a work surface
only.

8
DESCRIPTION OF YOUR APPLIANCEEN
•DESCRIPTION DE VOTRE TABLE
Burner cover
Burner head
Injector
Spark plug
Thermocuouple
(modèle with
safety device)
Manette
Gasket
Tap
Tip
This Guide to Installation and Use is valid for several models. Minor differences in
details and fittings may emerge between your appliance and the descriptions provided.
00035
F
G
H
Hob model 2 gas burners
and 2 induction cookong
plates
Pan support
D
C
B
A
E
A
B
C
D
E
F
G
H

9
•CHOICE OF LOCATION
Your appliance shoud be flush mounted in the
surface of a support cabinet that is a minimum of
3 cm thick, made of a material that resists heat
or that is covered with such a material.
So as not to inhibit the movement of cooking
utensils, there should not be to any obstacle
within 30 cm of the hob to the right or left or
back.
If a horizontal divider wall is positioned under the
hob, it should be placed between 10 cm and 15
cm away from the top of the work surface. In any
event, do not store aerosol cans or containers
under pressure in any compartment that may exist
under the hob (see “Safety Recommendations”
chapter).
BEFORE INSTALLATION
of your applicance and to ensure leaktightness
between the drawer unit and the work surface,
make sure that you glue the seal provided in the
plastic bag (Fig. 02).
—Remove the pan supports, the burner covers
and burner heads; noting their positions.
—Turn the hob over and carefully place it on top
of the opening in the cabinet so as not to
damage the knobs and spark plugs.
—Glue the foam seal, supplied with the
appliance, to the outside edge of the frame.
This seal ensures leaktightness between the
glass and the work surface.
—Place your hob in the opening of the support
unit, carefully centering it in the cut-out.
—Reposition the pan supports, burner covers
and burner heads.
—Connect the hob’s power cable to your
kitchen’s electricity supply (see “Electric
connection” section).
—Connect your appliance to the gas supply (see
“Gas connection” section).
•
49 cm
3 cm mini
30 cm mini
56 cm
30 cm mini
5,8 cm mini
70 cm mini
Fig. 01
Fig. 02
Housing
Seal
APPLIANCE
Standard
cabinet
cut-out
Standard
cabinet
cut-out
Total
dimensions
above
the work
surface
Total
dimensions
below
the work
surface
Width
56 cm
26.5 cm
71 cm
31 cm
55.4 cm
26 cm
Depth
49 cm
49 cm
52.2 cm
51 cm
47 cm
47 cm
Thickness
depending
on
cabinet
depending
on
cabinet
5 cm
5 cm
5.1 cm
5.1 cm
Model
60 cm
30 cm
60 cm
30 cm
60 cm
30 cm
1/ INSTALLING YOUR APPLIANCE EN

10
1/ INSTALLING YOUR APPLIANCEEN
AA
A A
—If you wish, you can immobilise the hob
using the four mounting brackets delivered
with their screws (Fig. 02) to attach them to
the four corners of the housing. You must
use the holes provided for this
purpose, according to the diagram
above (Fig. 01).
—Stop screwing when the mounting
bracket starts to become deformed.
Do not use a screwdriver.
CASE OF FLUSH MOUNTING
ABOVE A DRAWER, A
CUPBOARD OR AN OVEN
• Above an empty cabinet or a drawer
(Fig. 03).
A ventilation space of 8 cm minimum is
required and a 0.5 cm opening around the
unit’s width.
Fig. 01
Fig. 02
Mounting bracket
Underside view
of the housing
•TIPS FOR FLUSH MOUNTING
Mounting holes
A
Cabinet
2
1
3
8 cm mini
4 cm mini
1
Min. 0.5 cm opening
around the hob’s width.
Fig. 03
•
Screw

11
CASE OF FLUSH MOUNTING
ABOVE A DRAWER, A
CUPBOARD OR AN OVEN
(continued)
—Above an oven (Fig. 01)
This must be in a low position. At the
front there must be a 0.5 cm opening
around the cabinet’s width and an air inlet
of 30 cm2minimum at the back of the unit.
If the oven is not fitted with a ventilation
system with an air outlet at the front, you
must use an insulation kit between the
oven and the hob (to be ordered from the
distributor).
If the oven has a “pyrolysis” function, NEVER
use the cooking hob during pyrolysis.
;;;;
11 cm
mini
Découpe de
30 cm2 à droite
et/ou à gauche
Ouverture min.
100 cm2
Circulation d'air ambiant
6 cm
5 cm
Circulation d'air chaud
1
3
;
11 cm
mini
Fig. 01
Min. 0.5 cm opening
around the hob’s width.
•
Min.100 cm2
opening
Circulation of ambient air
Circulation of hot air
30 cm2cut-
out on the
right or the
left
1/ INSTALLING YOUR APPLIANCE EN

12
CASE OF FLUSH MOUNTING
ABOVE A DISHWASHER
The hob may be installed above a
dishwasher providing that the following
basic precautions are taken:
—The height of your work surface must be
greater than or equal to 90 cm.
—You must cover the top of your
dishwasher with an insulation plate to
prevent the particles from its thermal
insulation being sucked up by the hob’s
fans. This plate is available from your After-
Sales Service Department.
—A minimum amount of fresh air must be
let in, so that the hob’s fan can adequately
cool the electronic components inside.
To this end, we suggest a cut-out of 30 cm2
at the back of one of the recess’ sides
(Fig. 01).
LLING YOUR APPLIANCE
11 cm
mini
Découpe de
30 cm2 à droite
et/ou à gauche
Circulation d'air ambiant
Circulation d'air chaud
1
3
90 cm
82 cm
Fig. 01
•
Circulation of ambient air
Circulation of hot air
30 cm2
cut-out on
the right or
the left
1/ INSTALLING YOUR APPLIANCEEN

13
1/ INSTALLING YOUR APPLIANCE EN
•
•ELECTRIC CONNECTION
The appliance must be plugged
in using a standardized power
cable with 3 conductors each
1.5 mm² ( 1 ph + 1 N +
ground) which must be
connected to the 220~240 Volt
network by means of a
standardized IEC 60083 power
socket or a single-pole cut-off
device in compliance with
installation regulations. The
safety wire (green-yellow) is
connected to the appliance's
ground terminal and must be
connected to the installation's
ground lead.
The plug of the electrical outlet
must be accessible after
installation.
—Connect the wires to the
electricity supply making sure
that the different-coloured wires
are in the right order (Fig. 01).
Warning
— The safety wire (green/yellow) is connected to the appliance’s ground terminal
and must be connected to the ground terminal of the electricity supply.
— If the power cable is damaged, it must be replaced by the manufacturer, its After-
Sales Service Department or a similarly qualifiied person to avoid danger.
— If a cooking hob is used that is not connected to the ground or has a faulty ground
electrode, the manufacturer’s liability shall under no circumstances be incurred in the
event of an incident or for any of its consequences.
Neutral
(N)
Live
(L)
Blue wire Black, brown
or red wire
Green/yellow wire
Fig. 01
CROSS-SECTION OF CABLE TO BE USED
H05V2V2F cable
Cross-section of
conductors in mm2
Fuse
220-240 V~- 50 Hz
3 conductors
including
1 ground
1,5
16 A
Cable type
H05V2V2F
Ground

14
GAS CONNECTION
•Preliminary comments
If your hob is installed above an oven or if proximity to other heating elements poses a
threat of overheating the connection, you must insulate the cable in a rigid pipe.
If a hose or soft pipe (in the case of butane gas) is used, it should not come into contact
with a moving part of the cabinet, nor should it pass through a location that may become
blocked.
•
;
;
@
@




;
;
Q
Q


Fig. A Fig. B
The gas connection must be installed in
compliance with applicable regulations in
the country of installation.
• Gas distributed by pipe,
natural gas,
For your safety, you must choose from the
three following connection options:
—Connection with a rigid pipe made
from copper and with screw-on mechanical
connectors (G1/2 gas standard mark). Make
the connection directly to the end of the
elbow fitted on the appliance.
—Connection with a wavy metal hose
(stainless steel) with screw-on
mechanical connectors (compliant with
the NF D 36-121 standard) whose service
life is unlimited ( Fig. A).
— Connection with a reinforced rubber
hose with screw-on mechanical
connectors (compliant with the NF D 36-
103 standard) whose service life is 10 years
(Fig. B).
Warning
When connecting your hob’s gas
supply, if you have to change the
direction of the elbow fitted on
the appliance:
- Change the sealing washer.
- Screw on the elbow’s nut, being
careful not to exceed a torque
of 17 N.m.
1/ INSTALLING YOUR APPLIANCEEN

15
• Gas supplied by tank or
cylinder (butane/propane)
For your safety, you must choose from the
three following connection options:
—Connection with a rigid pipe made
from copper and with screw-on mechanical
connectors (G1/2 gas standard mark). Make
the connection directly to the end of the
elbow fitted on the appliance.
—Connection with a wavy metal hose
(stainless steel) with screw-on mechanical
connectors (compliant with the NF D 36-125
standard) whose service life is unlimited
( Fig. 01).
—Connection with a reinforced rubber
hose with screw-on mechanical
connectors (compliant with the NF D 36-112
standard) whose service life is 10 years
(Fig. 02).
A
B
Sealing washer (not provided)
Adaptor (not provided)
Clamp (not provided)
C
Warning
All soft pipes and hoses whose
service life is limited must have a
maximum length of two meters and
must be accessible along their entire
length. They must be replaced before
the end of their service life (marked
on the pipe). Regardless of the means
of connection chosen, ensure that the
connection is leaktight, after
installation, with soapy water.
In France, you must use a hose or a
pipe bearing the stamp NF Gaz
In an existing system, a soft pipe fitted with
clamps (compliant with the XP D 36-110
standard) whose service life is five years
may be used. It is necessary in this case to
use an adaptor without forgetting to fit a
sealing washer between the adaptor and
the hob’s elbow (Fig. 03).
Tip
You can obtain the adaptor and the
sealing washer from your After-Sales Service
Department.
Warning
Screw on the adaptor with a
torque not exceeding 25 N.m.
;
;
@
@




;
;
Q
Q


Fig. 01 Fig. 02 Fig. 03
A
B
C
1/ INSTALLING YOUR APPLIANCE EN

16
CHANGING THE GAS SUPPLY
Warning
Your appliance is sold pre-set for
natural gas.
The injectors required for adaption to
butane/propane can be found in the
plastic bag containing this guide.
Each time you change the gas supply, you
must complete the following:
— Adapt the gas connection
— Change the injectors
— Adjust the hob connections.
• Adapt the gas connection : Refer to
the “Gas Connection” section.
• Change the injectors,proceeding as
follows:
— Remove the pan supports, heads and
covers from all burners.
— Using the wrench provided, unscrew the
injectors located under each crucible and
remove them (Fig. 01).
— Replace with the corresponding gas
injectors, in compliance with the positioning
of the injectors and the table of gas
properties at the end of this section:
— First screw them in manually until the
injector locks into place.
— Apply the wrench to the injector as far as
it will go.
— Draw a line on the burner plate using a
pencil at the place indicated (Fig. 02).
— Turn the wrench clockwise until the line
appears on the other side (Fig. 03).
Warning
Exceeding this limit may damage the
product.
- Reposition the burner heads, burner
covers and pan supports on the hob.
•
Tip
Each time you change the gas supply,
tick the box corresponding to the new gas
level on the label found in the plastic bag.
Refer to the corresponding “Gas
Connection” section.
Fig. 02
Fig. 03
Line
Line
Wrench
Wrench
Fig. 01
Wrench
Injector
Crucible
1/ INSTALLING YOUR APPLIANCEEN

17
• Adjust the hob connections: these
are located underneath the knobs
(Fig. 04) .
— Proceed one tap at a time.
— Remove the knobs and the gaskets by
pulling them up.
- Natural gas passage
- Using a small flat-head screwdriver, screw
in the brass burner power screws (yellow)
all the way, moving in a clockwise direction
(Fig. 05).
- Replace the gaskets and the knobs,
paying careful attention to their direction
and ensuring that the knobs are pushed in
all the way.
- Switching from butane/propane to
natural gas
- Unscrew the brass (yellow) burner power
screws (Fig. 05), using a small flat-head
screwdriver, turn twice
counterclockwise.
- Replace the knob.
- Light the burner in maximum heat mode,
then turn down to reduced heat mode.
- Remove the knob again, then turn the
burner power screw clockwise until it
reaches the lowest possible setting that
does not extinguish the flame.
- Replace the gasket and knob.
- Make several attempts to shift from the
maximum flow rate to the minimum: the
flame should not go out ; if it does,
unscrew the burner power screw so as to
obtain good flame retention during these
position switches.
- Reposition the burner heads, burner
covers and pan supports on the hob.
1/ INSTALLING YOUR APPLIANCE EN
Knob
Sealing
ring
Tap
Fig. 04
Fig. 05
Tap axis
Burner power
adjustment screw

Butane Propane Natural

19
DESCRIPTION OF THE WORKTOP
•
A
B
C
Induction cooking plate diam. 180 - 2800 W
Semi-fast burner, 1.5 kW (*)
Super-fast burner, 3.1 kW (*)
(*) Power obtained with G20 natural
gas
2/ USING YOUR APPLIANCE EN
00035
CB
AA

20
SWITCHING ON THE GAS
BURNERS
Each burner is supplied by a tap which can
be opened by pressing it and turning it in in
a counterclockwise motion.
The point “” corresponds to a closed tap.
—Choose the desired burner by using the
symbols located near the knobs (e.g. : back
left burner ).
Your hob is fitted with a burner-lighting
system built into the knobs.
—To light a burner, press on the knob and
turn it in a counterclockwise direction
to the maximum setting .
—Continue to press on the knob to
produce a series of sparks until the burner
lights.
The setting for more moderate flame
intensities is between the symbol and
the symbol .
Tip
When a knob becomes difficult to turn, do
not force it. Call the installer for
emergency repairs.
If the flame goes out accidentally, reignite
normally following the lighting instructions.
•
2/ USING YOUR APPLIANCEEN
Fig. 01