Branick 155 Use and care manual

COMMERCIAL WARRANTY
This product is warranted by BRANICK INDUSTRIES, INC. to the original
user-owner against defective materials or workmanship for a period of one
year from the date of shipment. During the warranty period, at the discretion
of Branick management, if the product is found to be defective, it will be
repaired or replaced without charge. For service, contact Branick (800-437-
4394) to obtain an RMA. Any product shipped to Branick must have an RMA
and proof of original shipment date. The repaired or replacement product will
be returned with transportation charges prepaid by Branick.
This warranty does not cover defects in the product caused by ordinary wear
and tear, abuse, misuse, overloading, accident (including shipping damage),
improper maintenance, alteration, or any other cause not the result of
defective materials or workmanship.
REPAIR OR REPLACEMENT IS THE EXCLUSIVE REMEDY FOR
DEFECTIVE PRODUCT UNDER THIS WARRANTY. THIS WARRANTY IS
EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, INCLUDING ANY
IMPLIED WARRANTY OF MERCHANT ABILITY OR ANY IMPLIED
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OF THIS
PRODUCT. BRANICK INDUSTRIES, INC. SHALL NOT BE LIABLE FOR
ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES.
BRANICK INDUSTRIES, INC. reserves the right to make changes in the
design or construction of our products without obligation to incorporate such
changes in products already sold and without notice.
Service parts and regular repair service are available from authorized
distributors of Branick products, or from:
BRANICK INDUSTRIES, INC.
4245 Main Ave.
Fargo, North Dakota 58103
Toll Free: 800-437-4394
© Copyright 2018 by Branick Industries, Inc www.branick.com. Printed in U.S.A
MODEL 155 Installation &
WALL MOUNT Repair Parts
AIRSTATION Information
REV012618 81-0283B

Installation
1) Remove the unit from the shipping carton and inspect for shipping
damage.
NOTE: Place the unit on a sturdy wall and secure with appropriate lag
screws (not included).
2) Pass an airline through the slot at the bottom of the wall plate and
connect an airline to the in-line filter.
3) Attach the supplied air hoses (Item 9) to the manifold.
4) Plug the inflator into a standard 110/120 v AC outlet.
Operation
1) Set desired pressure using the + or - buttons.
2) Attach hose(s) to tire(s).
3) Turn ball valve at manifold to FILL position.
4) Automatic inflation will commence.
NOTE: If tire is below 3 psi or unit is in N2P mode inflation will not
commence until the or button is pushed.
5) When complete, buzzer will sound. Turn ball valve to STOP position
and remove hose(s) from tire(s).
Service Parts
ITEM
QTY
PART NO.
DESCRIPTION
1
1
09-0018
BLOCKHEAD INFLATOR
2
2
028-307
#10-24 X 1-3/4”PHM SCREW
3
2
055-082
#8-32 NYLON LOCK NUT
4
1
60-0074
3/8” NPT HSH PLUG
5
2
60-0193
3/8”TUBE TO 1/4" NPT MALE ELBOW
6
4
60-0201
CLIP-ON CHUCK (CLOSED)
7
1
60-0233
(4) 1/4" NPT F X (2) 3/8”NPT F MANIFOLD
8
1
60-0340
1/4" FEMALE VENTED BALL VALVE
9
4
62-0022
AIR HOSE
10
1
096-013
1/4" NPT BRASS HEX NIPPLE
11
1
096-039
3/8-1/4 PIPE BUSHING
12
1
932-001
IN-LINE FILTER
13
1
D20-006
3/8" O.D. NYLON TUBE (BLACK)
1
1
09-0018
BLOCKHEAD INFLATOR
Service Parts Diagram