Braun Corporation NL Millennium 02 Series User manual

Millennium
W
A
RNING
Read manual
before installing
or servicing lift.
Failure to do so
may result in
serious bodily
injury and/or
property damage.
ual
Man
"Providing Access to the World"
International Corporate Hdqrs: P.O. Box 310 Winamac, IN 46996 USA
1-800-THE LIFT [phone] FAX: [phone]
®
®
Braun NL Series
Braun NL Series
DOT — Public Use Lift
DOT — Public Use Lift
“DOT — Public Use Lift” verifies that this platform lift meets the
“public use lift” requirements of FMVSS No. 403. This lift may be
installed on all vehicles appropriate for the size and weight of the
lift, but must be installed on buses, school buses, and multi-
purpose passenger vehicles other than motor homes with a gross
vehicle weight rating (GVWR) that exceeds 4,536 kg (10,000 lb).
CA
HZg^Zh
CA
HZg^Zh
Public Use Wheelchair Lifts
02
Series 02
Service Manual for:
31821 Rev. A
January
2008
Patent #5,261,779
Patent #6,065,924
Patent #6,238,169
Patent #6,464,447
Patent #6,599,079
Patent #6,692,217
Patent #6,739,824
Patents Pending
Patent #5,261,779
Patent #6,065,924
Patent #6,238,169
Patent #6,464,447
Patent #6,599,079
Patent #6,692,217
Patent #6,739,824
Patents Pending
Patent #5,261,779
Patent #6,065,924
Patent #6,238,169
Patent #6,464,447
Patent #6,599,079
Patent #6,692,217
Patent #6,739,824
Patents Pending
Patent #5,261,779
Patent #6,065,924
Patent #6,238,169
Patent #6,464,447
Patent #6,599,079
Patent #6,692,217
Patent #6,739,824
Patents Pending

NL917IB
e5*72/245*95/54*0110*00
1-800-THE LIFT™
BRAUNLIFT.COM™
The Braun Corporation
DOT Public Use Lift MODEL#
Max. Lifting Capacity - 800 lbs.
PATE NT
PENDING- 5,261,779-6,065,924-6,238,169-6,46
4,447-6,599,079-6,692,217-6,739,824
MFG DATE
55 14CG
PUMP CODE CYLINDER
02-00025
SERIAL NUMBER
05/24/05
OWNER'S WARRANTY REGISTRATION
PURCHASED FROM
DATE INSTALLED
NAME
ADDRESS
CITY
TELEPHONE
TO VALIDATE WARRANTY
REGISTRATION CARDS MUST BE RETURNED TO THE BRAUN CORPORATION.
OWNER
STATE ZIP
Sample Warranty/Registration Card
4WO"RAUN3ERIAL.O3ERIES.OIDENTIlCATIONTAGSSHOWNBELOWAREPOSTEDONTHELIFT
/NE)$TAGISPOSTEDONTHEOPPOSITEPUMPSIDEVERTICALARM!SECOND)$TAGISLOCATED
ONTHEOPPOSITEPUMPSIDETOWER"OTH)$TAGSPROVIDETHEPRODUCTIDENTIlCATIONINFOR
MATIONPROVIDEDONTHEWARRANTYREGISTRATIONCARD2ECORDTHEINFORMATIONINTHESPACE
PROVIDEDORDOCUMENTONACOPY4HISINFORMATIONMUSTBEPROVIDEDWHENlLING
AWARRANTYCLAIMORORDERINGPARTS
7ARRANTYAND2EGISTRATION)NSTRUCTIONS
)MMEDIATELYUPONRECEIVINGTHELIFTEXAMINETHE
UNITFORANYDAMAGE.OTIFYTHECARRIERATONCE
WITHANYCLAIMS
4WOWARRANTYREGISTRATIONCARDSSHOWNRIGHTARE
LOCATEDINTHELIFTMOUNTEDMANUALSTORAGEPOUCH
4HESALESREPRESENTATIVEMUSTPROCESSONEOFTHE
CARDS4HECONSUMERMUSTlLLOUTTHEOTHERCARD
ANDMAILITTO4HE"RAUN#ORPORATION4HEWAR
RANTYISPROVIDEDONTHEBACKCOVEROFTHISMANUAL
4HEWARRANTYCARDSMUSTBEPROCESSEDTO
ACTIVATETHEWARRANTY
#ONGRATULATIONS
Model No.
Series No.
Serial No.
Pump Code
Cylinder Code
Date of Manufacture
Sample Serial No./Series No. Identification Tag
NL917IB-02-00025-56-14CG
Serial No.Model No. Cylinder Code
Series No. Pump Code
7EAT4HE"RAUN#ORPORATIONWISHTOEXPRESSOURFULLESTAPPRECIATION
ONYOURNEWPURCHASE7ITHYOUINMINDOURSKILLEDCRAFTSMENHAVEDESIGNEDAND
ASSEMBLEDTHElNESTLIFTAVAILABLE
 4HISMANUALPROVIDESSERVICERELATEDMATERIAL2EFERTOTHE&-633.O
1UICK2EFERENCE)NSTALLATION3HEETFORINSTALLATIONINSTRUCTIONSOPERATINGINSTRUCTIONS
ANDMAINTENANCEPROCEDURES
 "RAUN-ILLENNIUM3ERIESLIFTSAREBUILTFORDEPENDABILITYANDWILLPROVIDEYEARS
OFPLEASUREANDINDEPENDENCEASLONGASTHELIFTISINSTALLEDANDSERVICEDASSPECIlED
BYA"RAUNCERTIlEDTECHNICIANANDTHELIFTISOPERATEDBYANINSTRUCTEDPERSON
  3INCERELY
  4(%"2!5.#/20/2!4)/.


  2ALPH7"RAUN
  #HIEF%XECUTIVE/FlCER

Page 1
#ONTENTS
Troubleshooting
Certification Checklist Diagnostic Procedures .......2-3
Lift Electrical Schematic .............................................. 4
Lift Wiring Diagram ...................................................... 5
Switch and Sensor Locations ..................................... 6
LCD Error Codes .......................................................... 7
Hydraulics
Hydraulic Schematic .................................................... 8
Hydraulics Parts List .................................................... 9
Hydraulics Diagram .................................................... 10
Repair Parts
Pump Module
Pump Module Parts List ........................................11
Pump Module Diagram ......................................... 12
Lift Exploded View
Repair Parts List ................................................... 13
Exploded View........................................................ 14

Page 2
Use the following adjustment procedures should the lift not function as described in the certification checklist.
These procedures must be followed in order for the lift to be FMVSS 403/404 compliant.
• Vehicle movement is prevented unless the platform is fully stowed.
1. Verify lift stowed signal - pin 7 on the pump module has a +12 volt signal OR pin 9 has a ground signal
(depends on interlock used).
2. Refer to the interlock installation instructions.
• Lift operation shall be inhibited unless the vehicle is stopped and vehicle movement is prevented.
1. Verify vehicle secure signal (pin 6) has a +12 volt signal.
2. Refer to the interlock installation instructions.
• The platform will not fold/stow when at least 50 pounds is on the platform.
1. Position the platform at the floor level loading position.
2. Loosen the locknut on the dual relief valve adjustment (do not remove locknut). See illustration below.
3. Turn the adjustment screw counter clockwise until the platform does not fold when the Fold button is
pressed.
4. Turn the adjustment screw clockwise in 1/4 turn increments and press the Fold button until the platform
folds completely (Note: return the platform to floor level position after each attempt to fold the platform).
5. Turn the adjustment screw an additional 1/8 turn after the platform folds successfully.
6. Tighten the locknut without moving the adjustment screw.
7. Verify the platform will not stow with at least 50 pounds on the platform.
• The inner rollstop will not raise if occupied by at least 25 pounds.
- Call Product Support
Dual Relief Valve
Adjustment
(Located beside Backup Pump)
Certification Checklist Diagnostic Procedures

Page 3
• The outer barrier will not raise if occupied by at least 25 pounds.
1. Lower the platform to the ground level loading position.
2. Remove the pump cover.
3. Turn the pressure adjustment screw (shown below) counter clockwise until the outer barrier does not raise
when the Up button is pressed.
4. Turn the pressure adjustment screw clockwise in 1/4 turn increments until the outer barrier raises and fully
locks in position when the Up button is pressed. DO NOT turn the pressure adjustment screw beyond this
position.
5. Verify the outer barrier will not raise when occuppied with at least 25 pounds.
6. Reattach the pump cover.
• Verify platform lighting when lift is deployed.
1. Replace bulb(s) in the light housing.
2. Check fuse (5 amp fuse on circuit board; F13)
• An audio warning (and visual warning for public lifts) will activate if at least 25 pounds is on the threshold area
when the platform is a least 1" below floor level.
1. Remove the threshold warning plate
2. Verify the threshold strip switch connectors are connected (see illustration on Page 6)
3. Replace the threshold strip switch
4. Reinstall the threshold warning plate
• Lowering the platform beyond the inner rollstop locking position is allowed only when the inner rollstop is locked
in position.
- Call Product Support.
• Raising the platform more than 3" off of the ground is prevented unless the outer barrier is raised.
- Call Product Support.
DOWN
FOLD
UP
UNFOLD
Pressure
Adjustment
Screw
Certification Checklist Diagnostic Procedures

Page 4
Lift Electrical Schematic
NL917-03-025.ai
BK(6)
BK(4)
GN(20)
YL(20)
YL(20)
RD(20)
RD(20) BU(20) BK(20)
GN(20)
GN(20)
RD OR GN
BU(16)
GN(20)
GN(20) GN(20)
PK(20)
WH(20)
WH(20)
GN(20)
GN(20) GN(20)
GN(20)
LT. GN / GN(18)
GN(14)
BK(18)
UP/FOLD
SOLENOID
RD (2)
PUMP
RD(14)
CIRCUIT
SENTRY
(CIRCUIT BREAKER)
PLATFORM LIGHTS (OPTION)
RD(4)
RD(2)
HYDRAULIC
(UP)
M
POWER
STUD
PUMP BODY
GROUND
PUMP BODY
GROUND
RD(20)
DOWN
SOLENOID
BRIDGE
SOLENOID
M
BATTERY
CHASSIS GROUND
CIRCUIT BREAKER
CONNECTORS
JUNCTION
MOTOR
MICROSWITCH
PRESSURE SWITCH
DIODE
SWITCH
SOLENOID
SYMBOLDESCRIPTION
SOLENOID
NOTE: ALL WIRES ARE 22 GA.
UNLESS OTHERWISE NOTED.
LIFT CONTROL MODULE
LED
COUNTER
MAGNETIC SWITCH
LIGHT
BEEPER
DUAL RELIEF
SOLENOID
INTERLOCK
LED
THRESHOLD
WARNING
LIGHT
THRESHOLD
WARNING
BEEPER
ROLL STOP
RAISED
SENSOR
ROLL STOP
LATCHED
SENSOR
NO
NC
C
BU(32)
YL(32)
GN(32)
RD(32) BK(32)
WH(32)
BU(32)
YL(32)
GN(32)
RD(32) BK(32)
WH(32)
GN(20) RD(14)
J3
+
E
SN
-
00000
SWITCH BOX
LIFT
6
5
4 3
J2
6
5
4 3
P2
22 11
2
1
J4
2
1
P4
UP
DOWN
UNFOLD
FOLD
4
3
4
3
55 66
1
2
J9
1
2
P9
2
1
2
1
1
2
1
2
BK(20) BU(16) RD(20) BN(20)
WH(20)
PK(20) 1
6
J8
1
6
P8
2
3
2
3
44 55
2
1
P6
2
1
J6 J13
4
3
4
3
55 66
5
6 8
3
4
2
GN(20)
GN(20)
RD(18)
RD(20)
BK(18)
BK(18)
BK(18)
WH(20)
BK(18)
RD(18)
BK(18)
BK(24 GA COPPER)
BK(24 GA COPPER)
BK/WH(24 GA SILVER)
BK/WH(24 GA SILVER)
BK(18)
GY/RD(18)
BK(20)
BK(20)
GY/RD(18)
2
1
J7
2
1
P7
3
44
3
1
2
1
2
1
2
1
2BK(18)
RD(18)
BK(20)
RD(20)
RD(18)
BK(18)
WH(20)
GN(20)
13 15 4 14 7 12 10 11 17 8 9 18
J5
13 15
4
14
7
12 10 11 17
8 9
18
P5
P28J28
P16
J20P20
J20P20
J16
P16
J16
1
2
1
2
P32
J32
66 5 5 16 16 3 3 1 1 2 2
WH
BU BK
2
3
2
3
11
BU(20) BK(20) OR(20)
3
2
2
3
11
J25
P25
J26
P26
P27
YL(26)
RD(26)
GN(26)
RD
OR
GN
2
3
1
P27
J27
2
3
1
J27
YL(26)
RD(26)
GN(26)
WH
BU
BK
2
3
1
P26
2
3
1
J26
BRIDGE
MICROSWITCH
MAGNET
N S
N S
N S
FRONT PUMP
ONLY
MAGNET
OR
RD
GN
YL(26)
RD(26)
GN(26)
IB RAISED
SENSOR
THRESHOLD
SENSOR
2
3
2
3
11
MAGNET
WH(20)
WH(20)
VT(20)
VT(20) OR(20) OR
OR
RD GN
2
1
2
1
NO
NC
C
BU(16)
BU(16)
BU(16)
RD
RD
BK
BK
GN
GN
WH
WH
BK RD
WH
GN
MAGNET
LIFT POWER SWITCH
1
2
1
2
J15
P15
1
2
1
2
P15 J15
5
6
7 7
8
3
4
2
1 1
P13
BK
RD
PRESSURE
SWITCH
GN BK GN BK BK RD RD RD
ROTARY
POSITION
SENSOR
FLOOR LEVEL
MEMORY SET
PUSH BUTTON
COUNTER
GN
RD
RD
J30
BK BK
RD
POS.+
E
NEG. -
RD
BK
BK
GN
GN
3
12
2
6
5 4 1 7
8
9
10
11
3 12 2 6 5 4 1 7 8 9 10 11
P3
C
E
F
C
DD
AA
BB
E
F
00000
C1
WH
BK
IB OCCUPANCY
MICROSWITCH
WH
BK
NO
NC
C
RD(20)
NC
GN(20)
INTERLOCK
J21
8
9
P21
6
7
5
2
3
4
1
8
9
6
7
5
2
3
4
1
GY/RD(18)
BK(20)
BK(20)
WH(20)
WH(20)
BK(20)
RD(20) RD(20)
GN(20)
YL/LT. BU(20)
VEHICLE SECURE SIGNAL GY/RD(18)
LIFT STOWED SIGNAL
1
2
1
2
3
4
3
4
J31P31
C5
STOW INTERLOCK (+)
MICROSWITCH NO
NC
C
GN(20)
WH(20)
C6
STOW INTERLOCK (-)
MICROSWITCH NO
C
(+12V OUTPUT)
(GROUND)
OR
(+12V INPUT)
ROTARY POSITION SENSOR

Page 5
,IFT7IRING$IAGRAM
Platform Lights (Option)
Circuit Sentry
(Circuit Breaker)
Bat.
Aux.
Lift
Power Cable
205-0712-37
Pump Module
Power Feed
26082A-4
Connects to
Vehicle Battery
(+) Positive Post
Lead Wire
13362A
GN(20)
BK(20)
RD(20)
or
Note polarity of diode. It
must be oriented as shown.
Detail at left shows two different
styles of diode identification.
GN(14)
RL3
GN(20)
BK
RD
GN(20)
WH(20)
Ground
BU(16)
BK(24) COPPER
BK(24) COPPER
BK / WH(24) SILVER
BK(24 GA COPPER) BK
GN WH
RD
BK / WH(24 GA SILVER)
BK / WH(24) SILVER
BK(24 GA COPPER)
BK / WH(24 GA SILVER)
FS2
FS10
FS3
FS5
FS8
FS9
FS12
FS13 FS14
FS7
FS4
FS1
FS20
FS21
FS11
WH(20)
GN(20)
PK(20)
Note: Shown with lift in stowed position.
Up/Fold
Solenoid
Motor Power Feed Wire
Beeper
Threshold
Warning
Light
Lift
Control
Module Interlock LED
(Side view of
solenoids removed
from pump.)
J7
J9
J8
J4
J3
B
A
T
A U
X
GN(16)
RD(20)
GN(16)
J28 P28
P15J15
J15P15
P32J32
P8
P5
P3
P4
P9
P6
P7P16
P20
J20
P20
J20
J30
J16
P16 J16
RL5 RL6
RL7
RL2
RL1
4L
R
31030A45
985-A1534NA
+-
Threshold Sensors
IB Raised
Sensor
Counter
Down
Dual Relief
Power
Stud
915-2530NA
31221A
31221A
RD(4)
RD(2)
RD(2)
BK(6)
Lift Power
Switch
BK
RD(20)
GY/RD(18)
985-0531NA
AN2352-589
915-2533NA
RD(20)
RD(20)
GN(20)
WH(20)
BK(20)
BK(20)
BK(20)
RD(20)
BK(20)
4
5A
3
3
0
1
3
6
9A
3
3
0
1
3
)81(KB )81(KB )
8
1
(KB
)
8
1
(KB
RD(20)
BK(20)
RD
GN
J6 J13
J5
+-
-
E
+
GREEN(26)
RED(26)
YELLOW(26)
3
2
1
COLORNO.
3-COND WIRE CODE
GREEN
RED
ORANGE
3
2
1
COLORNO.
3-COND WIRE CODE
321
123
BLACK
RED
NOT USED
NOT USED
RED
GREEN
6
5
4
3
2
1
COLORNO.
12-COND WIRE CODE
BLACK
GREEN
BLACK
RED
NOT USED
NOT USED
12
11
10
9
8
7
123456
78910
11
12
NOT USED
NOT USED
GREEN
WHITE
BLACK
RED
6
5
4
3
2
1
COLORNO.
6-COND WIRE CODE
321
546
BLACK(20)
RED
BLUE(20)
ORANGE(20)
4
3
2
1
COLORNO.
BLACK
NOT USED
NOT USED
NOT USED
8
7
6
5
COLORNO.
8-COND WIRE CODE
321
657
4
8
GRAY / RED(18)
BLACK(20) & WHITE(20)
RED(20) & GREEN(20)
NOT USED
4
3
2
1
COLORNO.
4-COND WIRE CODE
21
43
1 2
2
11
2
1
2
2
1
1
2
21
1
2
21
Note: All wires 22 GA.
unless otherwise noted.
GREEN
NOT USED
NOT USED
NOT USED
D
C
B
A
COLORNO.
6-COND WIRE CODE
RED
BLACK
F
E
C1
2
1
22
1
2
1
1
21
2
1
Rotary
Position
Sensor
Floor Level
Memory Set
Push Button
ABCD E F
IB Occupancy
Microswitch
C-H
COM
NO
NC
WH
BK
4N.O.
N.C.
.
M
O
C
GN(20)
BN(20)
PINK (20 GA.)
BLACK (20 GA.)
BLUE (16 GA.)
RED (20 GA.)
BROWN (20 GA.)
WHITE (20 GA.) & WHITE (20 GA.)
6
5
4
3
2
1
COLORNO.
6-COND WIRE CODE
321
546
FS16
FS17
Bridge
BK(4)
Pump Ground
Back
Plate
Hydraulic
Pump
Down
26161A-84
Dual
Relief Bridge
Roll Stop
Raised Sensor
Rollstop Extension
(Front Pump Only)
Roll Stop
Latched Sensor
J25 P25
P26 J26
P27 J27
31010FA - Front Pump
31010RA - Rear Pump
30433A60 31208A
915-2535NA
321
BU(16)
BU(16) WH(20)
VT(20)
Bridge
Microswitch
COM
NO
NC
30433A60 J26
J27
P26
P27
GREEN (26 GA.)
RED (26 GA.)
YELLOW (26 GA.)
3
2
1
COLORNO.
3-COND WIRE CODE
1
2
1
2
123
BLACK
BLUE
WHITE
3
2
1
COLORNO.
3-COND WIRE CODE
321
GREEN (26 GA.)
RED (26 GA.)
YELLOW (26 GA.)
3
2
1
COLORNO.
3-COND WIRE CODE
123
GREEN
ORANGE
RED
3
2
1
COLORNO.
3-COND WIRE CODE
321
GREEN
ORANGE
RED
3
2
1
COLORNO.
3-COND WIRE CODE
123
GREEN (20 GA.)
RED (20 GA.)
YELLOW (20 GA.)
3
2
1
COLORNO.
3-COND WIRE CODE
321
BLACK
BLUE
WHITE
3
2
1
COLORNO.
3-COND WIRE CODE
123
BLACK (20 GA.)
ORANGE (20 GA.)
BLUE (20 GA.)
3
2
1
COLORNO.
3-COND WIRE CODE
✸✸✸ ✸✸
FS18
FS19
RD
BK
Pressure
Switch
ORANGE JUMPER
NOT USED
ORANGE JUMPER
GREEN (20 GA.)
YELLOW (20 GA.)
RED (20 GA. )
NOT USED
VIOLET (20 GA.)
WHITE (20 GA.)
6
5
4
3
2
1
COLORNO.
18-COND WIRE CODE
7
8
9
BLACK
WHITE
NOT USED
GREEN
ORANGE
RED
NOT USED
NOT USED
NOT USED
15
14
13
12
11
10
COLORNO.
16
17
18
11 10
13 121415161718
21
43
5
67
8
9
Switch
Box
P4
UP
DOWN
D
L
O
F
N
U
DLO
F
100063-001
GY/RD(18)
J21P21
Interlock
Connection
VEHICLE SECURE SIGNAL +12V INPUT
LIFT STOWED SIGNAL
(Located in cavity #7 or #9 - see chart above)
31797A
31798A
WHITE(20)
GREEN(20)
RED(20)
BLACK(20)
4
3
2
1
COLORNO.
4-COND WIRE CODE
4
3
2
1
COLORNO.
4-COND WIRE CODE
GRAY / RED(18)
NOT USED
NOT USED
NOT USED
NOT USED
NOT USED
6
5
4
3
2
1
COLORNO.
9-COND WIRE CODE
WHITE(20)
NOT USED
BLACK(20)
9
8
7
GRAY / RED(18)
NOT USED
NOT USED
NOT USED
NOT USED
NOT USED
6
5
4
3
2
1
COLORNO.
9-COND WIRE CODE
NOT USED
YL / LT. BU(18) +12V SIGNAL
YL / LT. BU(18) GROUND SIGNAL
9
8
7
123
456
789
123
456
789
BK(20)
RD(20) Stow Interlock (+)
Microswitch
C-H
COM
NO
NC
C5
N.O.
COM.
N.C.
GN(20)
WH(20)
915-A2539NA
Stow Interlock (-)
Microswitch
C-H
COM
NO
NC
C6
N.O.
COM.
N.C.
YL/LT. BU(18)
GY/RD(18)
J31 P31
WHITE(20)
GREEN(20)
RED(20)
BLACK(20)
21
43
34
12
GN(20) RD(14)
RD(14)
P13

Page 6
NL917IB Switch and Sensor Locations
*Bridging
Microswitch
31010RA (Rear Pump)
31010FA (Front Pump)
Pressure Switch
31199 Threshold Strip Switch
31221A (Qty. 2)
Outer Barrier Raised
Magnetic Sensor
30433A60
Outer Barrier Latched
Magnetic Sensor
30433A60
Outer Barrier Raised
Magnet
30662
Outer Barrier Latched
Magnet
30662
*Note: Mirror image for
right (front) pump lifts.
Inboard
Outboard
Right
Left
*IB Raised
Magnetic Sensor
31030A45
*IB Occupancy
Microswitch Assy.
31643A
*IB Raised
Magnet
30662
DOWN
FOLD
UP
UNFOLD
*Rotary Position Sensor
31194A
*Stow Microswitch
23184 (Qty. 2)

Page 7
58 – Outboard barrier is not up and latched and the plat-
form is 3” above the ground
59 – Outboard barrier is not up after pausing platform
travel
75 – Low voltage detected; must turn off power switch to
reset LCD
77 – Vehicle secure interlock has not been activated
90 – Position will be set if you keep holding the button
until it beeps
91 – Position is out of a predetermined acceptable range
of floor position
92 – Bridge switch is not made, needs adjusting
93 – Inboard barrier occupied switch is not made, posi-
tion needs to be moved or switch should be ad-
justed
94 – Outboard barrier is not made, fix and try again
95 – Outboard barrier latch is not made (check for jumper
on Century and Vista lifts, check latch on Millennium
lifts)
99 – Controller program is not valid; replace controller
Flashing Numbers
Flashing 65 – Unfold button is pressed
Flashing 66 – Fold button is pressed
Flashing 67 – Down button is pressed
Flashing 68 – Up button is pressed
Flashing 69 – Bridge switch is activated
Flashing 70 – Outboard barrier latch switch is activated
Flashing 71 – Ground detect switch is activated
Flashing 72 – Outboard barrier up switch is activated
Flashing 73 – Inboard barrier up switch is activated
Flashing 74 – Inboard barrier occupied switch is acti-
vated
Flashing 76 – Outboard barrier occupied switch is
activated
Flashing 78 – Threshold tape switch “A” is activated
Flashing 79 – Threshold tape switch “B” is activated
Flashing 80 – Position set button is pressed
LCD Error Codes
Listed below are codes that the lift controller outputs
during lift operation. The codes will be displayed
on an LCD screen located on the lift control board
inside the pump module. See the Manual Operating
Instructions in the operator's manual for pump cover
removal instructions.
Non-Flashing Numbers
01 – Platform stowed
02 – Platform unfolding
03 – Platform unfolding paused
04 – Platform at floor level
05 – Platform beginning to lower
06 – Platform lowering (threshold cannot be occupied
from this point down)
07 – Outer barrier moving to horizontal position
08 – Platform at ground level
09 – Outer barrier moving to vertical position
10 – Platform raising
11 – Platform raising paused at floor
12 – Platform folding (limited pressure)
13 – Platform folding (full pressure)
14 – Timed fold (cinching lift tite) or (anti-rattle state)
15 – Platform folding stopped
16 – Paused fold
17 – Platform between ground and 3” above ground
18 – Platform above 3”
28 – Illegal function/not defined
29 – Interlock fault not recognized (or has been cleared
but a motion button is still pressed)
30 – Platform location unknown
31 – Platform location transition state; attempting to
locate position
50 – Outboard barrier is not up above inboard barrier
locked position
51 – Threshold is occupied when platform is 1” or more
below floor level
52 – Inboard barrier is not up and locked below inboard
barrier locked position
53 – Inboard barrier occupied sensor is not activated
between floor and inboard barrier up position
54 – Outboard barrier is occupied before it is up
55 – Outboard barrier is not latched when above the
inboard barrier locked position (Millennium only)
56 – Outboard barrier is not up and latched and bridge
switch did not deactivate
57 – Outboard barrier is not up and latched and ground
detect switch did not deactivate (Century and
Vista only)

Page 8
Hydraulic Schematic
Roll Stop
Cylinder
Orifice
Pump Side
Cylinder
BACKUP
PUMP
2500
PSI
Secondary
Valve
Folding
Relief Valve
Lifting
Relief Valve
Down
Valve
1900
PSI
PUMP
Opposite
Pump
Cylinder
M
Orifice
Bridging
Valve
800
PSI
.50 GPM Roll Stop Fold
Pressure Switch
Fixed Displacement
Pump
Vented Reservoir
Orifice
Backup Pump
Single Acting Cylinder
Check Valve
Manual
Shutoff Valve
Pressure Switch
2 Way 2 Position
Solenoid Valve
Pressure Compensated
Flow Control
Relief Valve
Description Symbol Description Symbol
Filter Screen
Unfold Orifice
M
Pump Motor
Hydraulic Port

Page 9
NL917IB Hydraulics Parts List
Item Qty. Description Part #
1 1 Pump Assembly (M268-0113)12V - with Reservoir/with Backup Pump) 31038-12V
2 1 Solenoid, 4-Post (See Pump Module Exploded View for Solenoid Selection)
3 1 Power Cable, Up Solenoid to Motor 29049
4 1 Motor, Pump - 12 Volt - Low RPM 31350
5 1 Elbow, 65° - Male 7/16-20 SAE O-Ring to 7/16-20 SAE O-Ring Boss 26578
6 2 Valve Assembly, “Down / Bridge” (complete) 31348K
7 3 Coil (only), “Down / Bridge” Valve - (shown below) 31122
8 2 Cartridge (only), “Down / Bridge” Valve - (shown below) 26078
9 1 Valve Assembly, “Duel Relief” (complete) 31120K
10 1 Cartridge (only), “Duel Relief” Valve - (shown below) 31121
11 1 Cap, Reservoir Filler 16935
12 4 O-Ring (only), Hand Pump Mounting 17351
13 1 Hand Pump (Backup) with O-Rings (Item 12) 26074
14 3 Screw, 1/4-20 x 2-1/4”, Allen Head 26080
15 1 Clamp, Reservoir - H-48 (M259) 17069
16 1 Reservoir, Hydraulic Fluid 16934
17 1 Fitting, 90° - 1/8” NPT x 1/8” Barb - Plastic 87563
18 1 Switch, Pressure, 7/16-20 SAE O-Ring Male 31199
19 2 Fitting, Male 7-16-20 SAE O-Ring to Male 7/16-20 JIC 37° 24504
20 1 Elbow, (1) Female 7/16-20 JIC 37 Swivel - (2) Male 7/16-20 JIC 37° 26579
21 1 Hose Assembly, 1/8” (Opposite Pump Side) 16004A-086
22 1 Hose Assembly, 1/8” (Pump Side) 16004A-046
23 2 Elbow, 90°, 7/16-20 SAE O-Ring Male - 7/16-20 JIC 37° Male, Orifice 26667
24 2 Cylinder w
C1514.3-9408
25 3 Elbow, 90°, 1/4” NPT Male to 1/4” Barbed 15150
26 1 Hose, Thermal Plastic - Black, 1/8” I.D. 23742R*
27 2 Connector, Plastic “Y”, 1/8” O.D. 18877
28 1 Hose Assembly, 3/16” w/Two Guards 915-2601-136
29 1 Fitting, 90° - Male 9/16-18 SAE O-Ring to Male 7/16-20 JIC 37° 87622
30 1 Cylinder, Roll Stop (Contains Items 25 & 30) 25309-05A
31 1 Handle with Grip 17206A
32 1 Diode Assembly, Up Solenoid 73906A
wSeal Kits: If repairing a cylinder, order Seal Kit #1500-0500P.
* Raw material items ordered and priced per inch (order specified length).
10
Cartridge
#26078
7
“Down and Bridge”
Valve (complete)
8
Cartridge
#24612
7
“Duel Relief”
Valve (complete)
6
Coil
#31122
Coil
#31122
9

Page 10
Hydraulics Diagram
Pump Side Cylinder
Opposite Pump Side Cylinder
Hydraulic
Pump
Manual
Backup
Pump
23
21 22
26
31
14
12
15
23
24
24
20
19
19
26
17
27
27
26
16
26
28
25
13
25
26
6
5
18
9
Roll Stop Cylinder
29
30
25
11
1
4
2
3
32

Page 11
NL917IB Pump Module Parts List
*Apply red #271 Thread Locker Loctite®to the four hex bolts (items 35 and 36) if a blue nylon patch is not present on
the bolts when retrofitting an M268-0113 pump assembly. Loctite®is available from The Braun Corporation under part
number 11522.
tIndicates items available for replacement part purposes only. These items are not included with replacement pump
modules.
Item Qty. Description Part No.
1 Pump Module (complete), 12 Volt, Rear 917-2516RNA
1 1 Pump Assembly (M268-0113) 12V-120G - Dual Relief / ARS (Includes Items 2 & 3) 31038-12V
2 1 Power Cable, Up Solenoid to Motor 29049
3 1 Solenoid, Up - 4-Post - Trombetta (Flat Mount) 31374
4 1 Diode Assembly, Up Solenoid 73906A
5 2 Nut, #10-32, Serrated Flange 83080
6 2 Fitting, Male 7/16-20 O-Ring to Male 7/16-20 JIC 37° 24504
7 1 Elbow, Female Swivel 7/16-20 JIC 37° to (2) Male 7/16-20 JIC 37° 26579
8 1 Switch, Pressure 31199
9 1 Control, Hand Pendant Assembly - Standard (Includes Items 10-18) 100063-001
10 1 Keypad, Hand Control 30000
11 1 Hand Pendant Case - Front 100027-001
12 1 Seal, Hand Control - Standard 100066-001
13 1 Module, Hand Control 100041-001
14 1 Screw, 10-32 x 1/2”, Phillip, Pan Head 82744
15 1 Hand Pendant Case - Rear 100159-001
16 1 Hanger, Round - Hand Control 73793
17 2 Screw, #4-40 x 1/4”, Phillip, Pan Head 11480
18 1 Cord, Coiled - 6-Conductor 100044-001
19 1 Control Board Assembly 100080-001
20 8 Standoff, Snap-In 31011
21 1 Switch, Push Button 31753
22 1 Plate, Backing / Mounting - Rear 985-2501RN
23 1 Cover, Pump, 2-Piece - Back
(Complete Assembly 915-0513RNA Includes Items 23 - 30) 915-0513RN
24 1 Recepticle, Clip On 28803
25 1 Lens, Threshold Warning - Red 30704
26 1 Decal, Warning / Pressure Relief Valve (Not shown - see Decal Section) 22249
27 1 Spacer, Lens - NHTSA 31386
28 1 Metal Ring Base - Lamp 30971
29 1 Socket, Lamp 30703
30 3 Screw, #8-32 x 1/2” Pan Head Phillips - Thread Cut 30974
31 1 Bulb, Light 19841
32 1 Diode, Green LED, Panel Mount 29545
33 1 Strain Relief - Liquid Tight 30753
34 2 Washer, 5/16” Flat 10063
35 2 Bolt, 5/16-18 x 3/4”, Nylock, Hex * See note below 29608
36 2 Bolt, 5/16-18 x 1/2”, Nylock, Hex * See note below 10012
37 1 Cable, Ground 22166A
38 1 Washer, 5/16” External Tooth 16368
39 1 Beeper, Continuous 30487
40 1 Switch, Toggle 12185
41 1 Decal, Lift Power - On/Off (Not shown - see Decal Section) 21494
42 1 Stud, Power Feed 26084
43 1 Rubber Boot, Red tSee note below 82046
44 1 Harness, Lift Interlock Connection 31797A
45 1 Pump Handle with Grip 17206A
46 1 Cover, Pump - 2-Piece - Top / Front
(Complete Assembly 915-0519RNA Includes Items 46 - 58) 915-0519RN
47 3 Rivet, Pop, SD43BS - 1/8” - .13”/.19” 12954
48 1 Plug, Window - Clear 30443
49 1 Stud, Wing Head - 1/4 Turn 28804
50 1 Retainer, Push On 28805
51 1 Washer, Nylon, 1/4” I.D. x 11/16” O.D. x .030” 12690
52 1 Clip, Pump Handle - Top 915-5517
53 1 Clip, Pump Handle - Bottom 915-5518
54 1 Wire Assembly, Lift Stowed Connection tSee note below 31798A
55 1 Decal, Manual Instructions - Public (Not shown - see Decal Section) 31412
56 1 Decal, Removal / Installaton - Pump Cover (Not shown - see Decal Section) 29051
57 1 Decal, Warning - Control Board Damage - ESD (Not shown - see Decal Section) 30787
58 1 Decal, Removal / Installation Pump Handle (Not shown - see Decal Section) 29052
59 1 Decal, Installation & Warning - Hydraulic Pressure Switch (Not shown - see Decal Section) 27154
60 1 Cable, Pump Module Power Hookup (Not shown - see Wiring Diagram) 26082A-4
61 1 Harness, Power - Stow Interlock (Not shown - see Wiring Diagram) 915-2530NA
62 1 Harness, Interlock / Lighting (Not shown - see Wiring Diagram) 985-0531NA
63 1 Harness, Up / Down Solenoid (Not shown - see Wiring Diagram) 915-2533NA
64 1 Harness, Threshold Switch Extension (Not shown - see Wiring Diagram) 985-A1534NA
65 1 Harness, Stow Interlock (Not shown - see Wiring Diagram) 915-1538NA

Page 12
NL917IB Pump Module Diagram
Pump Mounting Bolts
Apply red #271 Thread Locker Locktite®
to the three pump mounting bolts (items
35 and 36) if a blue nylon patch is not
present on the bolts when retrofitting an
M268 pump assembly. Loctite®is
available from The Braun Corporation
under part number 11522-1.
53
45
52
51
50
49
48
18
10
16
17
17
13
14
11
12
9
DOWN
FOLD
UP
UNFOLD
15
46
47
47
35
36
34
37
38
22
21
19
32
24
23 30
39
40
42
43
44
31
25
28
29
33
34
27
3
5
5
4
20
1
36
6
7
6
8
2
54

Page 13
Repair Parts List
1 1 Base Weldment 985R1148KS30 985F1148KS30 985R1148KS33 985F1148KS33 985R1148KS34 985F1148KS34
2 1 Cover, Pump, 2-Piece, Back-Bottom 915-0513RN 915-0513FN 915-0513RN 915-0513FN 915-0513RNA 915-0513FNA
3 1 Cover, Pump, 2-Piece, Top-Front 915-0519RN 915-0519FN 915-0519RN 915-0519FN 915-0519RNA 915-0519FNA
4 1 Platform Weldment 917-03050NW 917-03050NW 917-03350NW 917-03350NW 919-03450NW 919-03450NW
5 1 Outer Barrier Assembly (inc. 5,13,31,168,183) 915-0312NA30Y 915-0312NA30Y 915-0312NA33Y 915-0312NA33Y 915-0312NA34Y 915-0312NA34Y
6 1 Inner Roll Stop 915-0147NW30Y 915-0147NW30Y 915-0147NWY 915-0147NWY 915-0147NW34Y 915-0147NW34Y
7 1 Bridge Switch Assembly 31010RA 31010FA 31010RA 31010FA 31010RA 31010FA
8 1 Block, Platform Stop - Bridging - Rear 25778 900-0311 25778 900-0311 25778 900-0311
9 1 Block, Platform Stop - Bridging - Front 900-0311 25778 900-0311 25778 900-0311 25778
10 1 Plate, Backing/Mounting 985-2501RN 985-2501FN 985-2501RN 985-2501FN 985-2501RN 985-2501FN
11 1 Base, Cover 975-0148CN30Y 975-0148CN30Y 975-0148CN33Y 975-0148CN33Y 975-0148CN34Y 975-0148CN34Y
12 1 Rubber Nose 24603-33 24603-33 24603-33 24603-33 24603-34 24603-34
102 2 Bumper, 1"x 5/8" Long 33603
103 2 Screw, 1/2-20 x 1 1/2" Set Lock, Black 18663
104 2 Block, Guide-Platform Stow 28593
105 2 Pin, Platform 975-2325
106 10 Screw, 5/16-18 x 3/4", SHFS 25527
107 2 Spacer, UHMW, Vertical Channel 995-0320
108 1 Position Sensor Collet 31093
109 2 Bracket, Mounting, Quiet Ride 915-0392
110 2 Gas Spring, 12.2" Extended/8.3" Compressed 30550A
111 2 Bolt, 5/16-18 x 3/4", Carriage, Black 15858BK
112 3 Washer, 5/16", External Tooth 16368
113 4 Nut, 5/16-18 Hex 10058
114 2 Bracket, Inner Side Panel Guide 915-0703
115 3 Bearing, UHMW, Flat, Thin, Black 916-5406
116 2 Pivot, Bridge Plate Lever, Upper, Inside 916-5433
117 4 Bearing, Flange - 3/4" x 1/2" 24027
118 1 Spacer, UHMW, Latch 950-7760
119 1 Spring, 1/4" x 1" Extension w/Hooks 10774
120 1 Tubing, Polyurethane - 1/4" I.D. x 1/2" O.D. x .81" 28630R000.81
121 2 Pin, Clevis, 3/8" x 3", Black 24932BK
122 1 Pin, Platform Cylinder 915-0414
123 2 Ring, Snap, 1/2", External, .035" Thick 20946
124 1 Weldment, Tube-IB Fold Arm-Rear 985-0625RNW
125 1 Lever, Roll Stop Latch (Assembly #915-0345A) 915-0435
126 4 Nut, 3/8-16, Hex 10059BK
127 1 Weldment,Tube-IB Fold Arm-Front 985-0625FNW
128 1 Pivot, Roll Stop Cylinder, Front 990-0352
129 2 Bolt, 5/16-18 x 1 1/2" Hex Head, Cap 10014
130 2 Bolt, 7/16-20 x 1", SHCS, w/Nylock Patch 28474
131 4 Screw, #10-32 x 3/8", Flat Head, Hex 24537
132 3 Adapter, Cylinder/Roll Stop Lever-Out 990-0341
133 2 Bolt, 5/16-18 x 3/4", Button Head, Soc Cap Hd 24440
134 6 Rivet, Pop, 3/16"-.25"/.38", Black 14993
135 1 Adapter, Cylinder/Roll Stop Lever 915-0341N
136 2 Harness, Sensor - Cherry w/Plug 30433A60
137 4 Rivet, Snap, Black, .158/.197 Thick 25759
138 4 Clamp, Cable, 1/2", Plastic 10092
139 2 Nut, 5/16-18, Top Lock, Black 28324BK
140 2 Bolt, 1/4-20 x 1/2", Button Head Socket 15733
141 2 Bolt, 3/8-16 x 2", Hex Head, Cap 10027
142 2 Roller Assembly 1000-2395A
143 2 Roller Retainer 915-5353
144 2 Nut, 5/16-18 Hex, Lock 11387BK
145 2 Pivot, Bridge Plate Lever, Upper-Outer 916-5434
146 6 Clamp, 1/4" I.D.- Nylon Loop 84396
147 2 Clip, Hand Control Hanger 84389
148 11 Rivet, Snap, .201" x .256"/.295" 26362
149 4 Bearing, Flange, 1" x 1/2-16FDU08 28031
150 1 Cover, Plastic, Parallel Arm, O/S Rear-w/Tape 915-0702NA
151 1 Weldment, Bridgeplate Bracket, Front 985-0431FNW
152 4 Spacer, Handrail, .375” Thk. UHMW 995-0301
153 2 Washer, .516" I.D. x .75" O.D. x .250", Black 25336
154 1 Cover, Plastic, Parallel Arm, I/S Rear-w/Tape 975-0703NA
155 1 Weldment, Bridgeplate Bracket, Rear 985-0431RNW
156 2 Spring, Torsion - .366 I.D. x .05" 30386
157 4 Spacer, IB Lock 30394
158 2 Weldment, IB Lock 985-0630NW
159 4 Bearing, 3/8" I.D. x 1/2" Long 30405
160 4 Roller, .65" O.D. x 1/2" Long 985-0631N
161 4 E-Clip, 3/8" Shaft 84383
162 2 Spacer, Handrail, .230" Thk. UHMW 911-5301
163 2 Bolt, 1/4-20 x 1" Hex 10001
164 2 Nut, 1/4-20 Hex 10057
165 4 Washer, 1/4" External Tooth 83588
166 2 Bearing, Flange, 3/8" x 1/4" - Plastic 24028
167 2 Light Assy, Vertical Channel 31062A
168 1 Tab, Outer Barrier - Assembly 915-6367NA
169 1 Washer, .4" I.D. x .810" O.D. x .12" 24536
170 4 Spacer, UHMW-.75" O.D. x .39" I.D. x .25" 30227
171 1 Bolt, 3/8-16 x 3/4" Soc. Hd. Cap Screw Bk. 26259
172 1 Spacer, Flap Cylinder .700" Thick 915-0415
173 1 Guard, Rollstop Sensor Wires 915-0368N50Y
174 1 Parallel Arm Assy., Bottom w/Bearings-Front 917-0457NA
175 4 Screw, #10-32 x 1/2" Button Head, Socket, Cap 30375
176 1 Position Sensor Spacer 31092
177 1 Slide, UHMW,Platform Rotate 31677
178 3 Rivet, Pop, 3/16" - .13/.25" - SD64BS 11513
179 3 Washer, #10, Flat, Auto BK 11541
180 1 Adapter, Cylinder/Roll Stop Lever 915-0344
181 1 Bag, Vinyl - 7" x 10" 31174
Item Qty. Description Part No. Item Qty. Description Part No.
Part Numbers of Items Identical on All Lift Models
Item Qty. Description NL916IB NL916FIB NL917IB NL917FIB NL919IB NL919FIB
Part Numbers of Items Dedicated per Lift Model
13 2 Rivet, Pop, 3/16" x .06"/.13" 11512
14 8 Washer, .516" I.D. x 1" O.D. x .0269", Auto BK 15328
15 4 Washer, Finger, Disc Spring 27276
16 4 Snap-Ring 1/2" 13273
17 4 Snap-Ring 5/16" 24570
18 4 O-Ring, 5/16" I.D. x 1/16" O.D. 26614
19 2 Screw, Socket Head, 3/8-16 x 1/2" with 1/2" Shoulder 25929
20 2 Grommet, I.D. .281"/ FR.125" x GD.625"/T.375" 27725
21 1 Pivot, Roll Stop Lever 24550
22 11 Rivet, Pop, 1/8"- .13"/.19" 12954
23 1 Stud, Wing Head 28804
24 1 Retainer, Push-On 28805
25 1 Grommet, ID .312", FR .250", GD .813" T500" 27726
26 1 Pump Assembly 31038-12V
27 10 Pin, Pivot, Parallel Arm 917-0403
28 10 Screw Drive #8 x 3/16" Long Black 31086BK
29 1 Receptacle, Clip-On 28803
30 1 Cylinder Assy., Roll Stop, (Includes Fittings and Items 30 &123) 25309-05AK
31 1 Screw, 10-32 x 5/8" Pan Head Phillips, Thd. Cut 26714
32 1 Latch Assembly, Roll Stop 915-4343NA
33 2 Bolt, 5/16-18 x 1/2" Nylock, Hex 10012
34 2 Washer, 5/16" Flat 10063
35 2 Bolt, 3/8-16 x 1/2" Nylock, Hex 29729
36 1 Assembly, IB Occupied 31643A
37 1 Assembly, Rotary Position Sensor 31094A
38 2 Bolt, 5/16-18 x 3/4" Nylock, Hex 29608
39 1 Rivet, Pop, SD68 BSLF-3/16" - .38"/.50" 15244
40 1 Parallel Arm Assy., Top-Front w/Bearings 915-0437FA
41 4 Bearing, Flange, 1/2" x 1/4" 24442
42 1 Weldment, Latch, Lift/Tite, Rear 27013RW
43 1 Weldment, Latch, Lift/Tite, Front 27013FW
44 2 Screw, #4-40 x 5/8", Round Head 14810
45 2 Screw, 1/4-20 x 3/4", Flat Head, Countersink 28986
46 1 Screw, #8-32 x 1", Mach. Truss Head 19912BK
47 2 Nut, #4-40 w/Lockwasher 19537
48 2 Nut, #8-32, Hex 10777
49 1 Parallel Arm Assy., Top 917-0437RNA
50 2 Cylinder, 14.625"/29.146" Retracted C1514.3-9408
51 1 Parallel Arm Assy., Bottom Rear 975-0458NA
52 16 Bearing, Flange, 3/4" x 3/8" 24011
53 8 Bushing, 3/4" I.D. x 1/2" 900-0456
54 1 Vertical Channel Weldment, Front, 48" 955-0448FNW
55 1 Cover, Plastic, Parallel Arm, O/S Front-w/Tape 915-0704NA
56 2 Tape, 1" Wide S-Face Foam, x 14" (1 Shown) 82015R014
57 6 Tape, 1" Wide S-Face Foam, x 10" (3 Shown) 82015R010
58 1 Cycle Counter-LCD Without Reset 30547
59 2 Handrail Weldment 985-0618NW
60 8 Rivet, Push In - 8MM 30063
61 4 Bumper, Rubber, 31/32" O.D. 10950
62 2 Screw, #8-18 x 1/2", Self-Tap, Phillips 13583
63 2 Bulb, Light 20-W, Halogen Reflector 31060
64 2 Nut, #10-32 w/Lockwasher 18349
65 2 Screw, 1/4-20 x 3/4", Button Head, Socket Cap 81068-000
66 2 Washer, 3/8" Flat, Black 10064
67 4 Nut, 3/8-16, Hex Lock 13617
68 2 Cotter Pin, 1/4" x 2", Black 15886BK
69 2 Nut, 1/4-20 Hex Lock 10775
70 1 Cover, Plastic, Parallel Arm, I/S Front-w/Tape 975-0701NA
71 2 Threshold Strip Switch 31221A
72 4 Screw, 1/4-20 x 1/2" FHSCS 18860
73 8 Washer, Finger Disk Spring 30772
74 10 Washer, 1/2" Flat Black Zinc 25346
75 2 Bolt, 3/8-16 x 1", Hex 10025
76 6 Washer, 3/8", Lock, Black 10069BK
77 2 Lever, Inboard Barrier 985-0404N
78 4 Clamp, Insulate, 1 3/8" I.D. 29765
79 2 Washer, 5/16" Lock, Black 10068
80 2 Gas Spring, Fold Arm 29186
81 2 Ball Stud, Gas Spring, 13MM x 3/8-16 F. Thread 29185
82 2 Washer, 3/8", Lock 10069
83 1 Spacer, Flap Cylinder .184" Thick 915-0416
84 2 Clip, Safety, 3/8-16 x 3/4", Flange 12608
85 6 Bolt, 3/8-16 X 3/4", Flange Button Head, Socket Cap 25171
86 2 Bolt, 5/16-18 x 2", Flange, Hex 25130
87 2 Nut, 5/16-18, Serrated Flange 25131
88 2 Arm, Slide Support (Replace In Pairs) 985-6612N
89 2 Slide, Platform, Rotate 985-0606N
90 2 Spacer, .5" O.D. x .334" I.D. x 1.515" LG 25132
91 10 Bearing, Flange, 3/4" x 1/4" 24012
92 2 Weldment, Platform Pivot Arm - 48" 985-0640NW-BKN
93 2 Pin, Pivot, Lower Arm 900-0413N
94 6 Ring, Snap, 3/4", External 18657
95 2 Bearing, UHMW, Flat, 1.226" 205-1760
96 2 Ball Stud, 10MM 21301
97 1 Vertical Channel Weldment, Rear 955-0448RNW
98 6 Plastic End Cap, 1" I.D. x 1 1/4" O.D. 20474
99 2 Grip, Handle, Yellow 19074
100 2 Spring, Dampener, Retract 26963
101 2 Bolt, 5/16-18 x 1 1/4" Low Socket Hd., Cap, Bk. 26327

Page 14
Lift Exploded View
53
114
111
109
104
113
53
53
53
50
53
53
109
111
6
79
113
53
53
50
162
85
115
115
115
85
149
107
89
149
107
2
29
33
38
34
35
10
26
112
104
113
112
112
133
133
1
52
52
52
40
52
52
52
174
134
134
52
52
52
114
146
146
148
148 52
52
49
52
52
52
51
45
108
69
176
36
64
134
52
52
94
117
117
74
179
181
106
74 106
27
28
18
14
14
43
27
100
17
16
28
17
100
18
74
106
27
28
98
98
98
98
11
58
58
73
72
14
16
14 15
78
179
17
17
42
27
28
78
134
78
179
113
79
7
74
106
94 117
117 162
145
76
66
75
127
129
144
161
160
159
157
156 157
158 19
159
160 161
73
73 73
61
59
99
62
80
129
144
161
160
159
157 156 157
158
154
110
68
98
97
124
130
60
91
91
152
91
152
87
86
91
90
170
94
89
177
150
145
19
66
76
75
93
94
138
146
146
138
148
148
148
141
85
88
57
57
60
148
148
60
147 22
60
82
159
160
161
84
81
74
106
148
178
175
74
106
138
138
27
28
27 28
63
167
27
28
74
106
148
148
67
146
92
67
110
96
44
47
92
61
59
62
130
99
91
91
93
80
84
152
91
152
86
87
91
88
90
170
94
68
54
70
55
67
98
60
60
60
60
141
82
81
74 106
74
167
63
106
74 106
27
28
27
28
27
28
94
95
67
96
146
148
175
85
78
134
15
147
22
72
72
72
136
83
122 123
22
22
22
22
123
140
142
143
30
172
103
103
139
149
139
149
32
119
118
173
171
61
61
178
105
25
48
8
48
46
20
41
41
125
128 180
101
143
9
30
169
4
131
132
140
142
166
120
13
13
166
121
121
5
31
168
137136
183
101
131
135
39
20
132 131
21
23
24
3
56
57
71
71
22
29 37
33
65
165
165
116
41
14
77
91
116
15
14
91
165
164
151
16
153
77
15
155
163 102
163 102
16
153
41
126
126
165
164
76
76

Over 300 Braun
Dealers Worldwide
"Providing Access to the World"
®
"Providing Access to the World"
International Corporate Hdqrs:P.O.Box 310 Winamac, IN 46996 USA
1-800-THELIFT [phone] FAX:[phone]
®

HZg^Zh
HZg^Zh
Millennium
CA
CA
Public Use
Wheelchair Lifts
Patent #5,261,779
Patent #6,065,924
Patent #6,238,169
Patent #5,261,779
Patent #6,065,924
Patent #6,238,169
Patent #6,464,447
Patent #6,599,079
Patent #6,692,217
Patent #6,464,447
Patent #6,599,079
Patent #6,692,217
Patent #6,739,824
Patents Pending
© The Braun Corporation
Patent #6,739,824
Patents Pending
© The Braun Corporation
All illustrations, descriptions and specifications in this manual are based on the latest product information available at the
time of publication. The Braun Corporation reserves the right to make changes at any time without notice.
All illustrations, descriptions and specifications in this manual are based on the latest product information available at the
time of publication. The Braun Corporation reserves the right to make changes at any time without notice.
When processing any warranty claims (parts, repairs, etc.), all requests must be processed through The
Braun Corporation Product Support Department. Call 1-800-THE LIFT (extension 3009) during normal
working hours. Product Support will issue a Return Material Authorization (RMA) number and detail the
procedures required for processing returns and/or authorizing credit.
The lift identification information is provided on the Braun Serial No./Series No. identification tag and
the two warranty cards (shown on inside front cover). The lift identification information must be
provided when filing a warranty claim or ordering parts.
Return Authorization Procedure
"Providing Access to the World"
International Corporate Hdqrs: P.O. Box 310 Winamac, IN 46996 USA
1-800-THE LIFT [phone] FAX: [phone]
®
®
31821 Rev. A
January 2008
31821 Rev. A
January 2008
Braun NL Series
Braun NL Series
Service Manual for: 02
Series 02
The Braun Corporation of Winamac, Indiana, warrants that it will repair (or replace at
Braun’s sole option) any defect in material or workmanship in its wheelchair lift for five years*,
providing the lift is installed, operated and maintained properly. This warranty is limited to the
original purchaser and does not cover defects in the motor vehicle on which it is installed, or
defects in the lift caused by a defect in any part of the motor vehicle.
This warranty commences on the date the lift is put in service, providing the warranty
registration card is completed and received by The Braun Corporation within 20 days of purchase.
If no warranty card is received, the warranty will expire three years from the date of manufacture
as identified on the lift serial number tag.
This warranty also covers the cost of labor for the repair (or replacement at Braun’s sole
option) of parts for three years when performed by an authorized Braun representative. (A labor
schedule determines cost allowance for repairs and is available upon request).
This warranty does not cover normal maintenance, service, or periodic adjustments
necessitated by use or wear. The Braun Corporation will not, under any circumstances, pay for loss
of use, incidental, or consequential damages related to the lift or vehicle in which it is installed.
This warranty will become null and void if the lift has been damaged through accident,
misuse, or neglect, or if the lift has been altered in any respect.
* The five-year portion of this warranty covers the following lift’s power train parts:
• Cable • Cylinder • Flow Control • Gear Box • Motor • Pump • Hydraulic Hose & Fittings
• Solid State Controller
All remaining lift components are covered by a three-year warranty.
Braun™Five-Year
Limited Warranty