Breathing Better NZ HM-AIR-881 User manual

1
User Manual
Air purifier
Model:HM-AIR-881 HM-AIR-882 HM-AIR-883 HM-AIR-884 HM-AIR-885 HM-
AIR-886 HM-AIR-887 HM-AIR-M6 HM-AIR-M7

2
一.Warm Tips
Thanks for using our Air purifier,before you use it,please read this manual
carefully.Welcome your suggestions while using it.
二.Specification
Voltage
220-240V/50Hz
Power
35W
Using room
35-50M2
Filter
Pre-filter,HEPA,Active cabon
三.Component name
Picture
四.Using Description
1. Read this manual carefully and keep it for future reference.
2. Remove the outer package and the pp bag outside of the filter.
3. Put the machine on the dry,smooth ground or level,ensure there is more
than 20cm space for the machine to be used.
4. Before plug in,please check the power and the plug.
5. When using the function of “negative ion”,there will be a little sound,it is
normal condition.Because the negation ion generator is working,it will release
a lot of negative ion.
五.Operation Description

3
Connect the machine to the power outlet
1. The power button will be flashing when the device is connected to the
poweroutlet.
2. Before first use: Please remove the front cover, by pulling from the
bottoms of the sides until it unhinges, to close insert the top first, and
push from the bottom until it clicks into place.
3. Speed choice
Choose the fan speed according to mode.
⑴ Normal mode (speed 2): used for emptyrooms.
⑵ Silent mode (speed 1).
⑶ Energy efficient mode (speed 3): used for crowded rooms.
4. Timer
The timer can be set for 1-to-8 hours.
5. Anion Mode
Anion mode can only be turned on/off only from the remote control.
Cleaning and Maintenance
Turn off the machine and unplug the power cord.
Clean dirt from the body of the machine by using a dry, softcloth.
Use a soft brush to clean both the wind inlet and outlet.
6. Filter replacement reminder
When the filter is in need of changing, it will remind you on the
screen. To reset “Replace Filter” reminder PRESS and HOLD
“Timer” button for 5 seconds.
7. Formaldehyde removal
8. Mode: Sleep/Auto
9. Air quality: Color led shows air quality: Ideal, Moderate and Poor

4
六.Error and its solution
Issue
Solution
Not work properly
Check if the power is on
No air from wind outlet
Check if the power is on
Mahine works so long time,but the air
is still not good
Because of long term and heavy
pollution,can add 1-2 extra machines
Strange noise from the machine
Be sure of moving the pp bag of the filter
Be sure ther is nothing blocking the wind
in/outlet.
If strange operation,contact the retailer.
七.Safety Notice
This machine cannot be used alone by Children,disabled,psychiatric
patient.Ensure your safety,please read the manual carefully and obey its
rules,it is very importand to your safety.
Forbidden
1. Donot use it if the cord,plug is broken.
2. Donot curve,pull,reverse the cord,donot put anything heavy on the
machine
3. Donot use the wet hands to control the machine and the power.
4. Donot take apart,repair the machine by yourself.
5. Donot put your fingers or other hard thing into the
inlet/outlet,otherwise,it may cause error or electric shock.
6. Donot install the machine in the wet room or conditions,such as
washroom.
7. Donot use in the condition of heavy oiled.
8. Donot use in the condition of Flammable and
explosive,corrosion,Flammable gas,metal rust.
9. Donot wash by petrol,chemicals,donot spray Insecticide.
10. Donot use the machine if you spray insectidide into the room.
11. Donot put the machine on the unsmooth ground or level.
12. Donot use the machine for the purpose of the hood in the kitchen.
13. Donot down or tilt the machine during using.
14. Donot move it when using it.

5
Safety Attention
1. Ensure the plug is in the right power socket according to the voltage
on the label.
2. If the cord is broken,please donot change it yourself,contact the
retailer.
3. Be sure the plug is right connection,and the plug will not be hot.
4. Ensure there will be more than 20cm distance from the wall or other
thing nearby,over 30 cm distance from the top.
5. Donot use other filters in the machine,donot press,hit,insert into the
maching by the hard,sharp.
6. Turn off the power when cleaning or mataining.
七.Maintenance Guide
1. Please keep well the warranty card.
2. Any problem if properly installation and usage,you can contact with
the retailers or agent by the card.
3. The following conditions are not covered by the waranty.
⑴Donot use the machine properly.
⑵Break the machine by strength,not the quality of the machine itself.
⑶Repair the machine personally,not using our professional technician.
⑷Warranty card is broken,changed,lost.
⑸The filters are not covered by the warranty.

6
Warranty Card
Name: Model Number:
Tel.: Post Code:
Address: ________________________________________
Buying Date: