Ionic Pro TURBO User manual

Owner’ s Guide

TABLE OF CONTENTS
PRODUCT BENEFITS > 02
SAFETY INSTRUCTIONS > 02
IMPORTANT WARNINGS > 04
Main Parts
OPERATING THE IONIC PRO TURBO® IONIC AIR PURIFIER > 0 6
Getting Ready
Controls/Settings
Selecting Settings
CLEANING & MAINTENANCE > 08
To Clean the Collection Blades
To Clean the Oxygen Plus™ Filter
To Clean the Internal Ionizing Wires
DEEP CLEANING > 10
TROUBLE-SHOOTING > 11
MORE THINGS YOU SHOULD KNOW > 12
Ozone and Your Health
ORDERING IONIC PRO® IONIC AIR PURIFIERS > 12
ORDERING EXTRA COLLECTION BLADES > 12
WARRANTY > 13
ARBITRATION AGREEMENT > 14
Thank you for purchasing
the Ionic Pro Turbo® ionic air
purier and congratulations
on taking this important
step in improving the quality
of air in your home, ofce or
other indoor environments.
Customer satisfaction is our
number one goal. Ionic
Pro Turbo® ionic air purier
is a premium air purifying
appliance which comes with
a limited one-year warranty.
Enjoy your Ionic Pro Turbo®
ionic air purier and visit
our website for more exciting
quality products and upgrades
at www.ionicpro.com.

IONIC PRO TURBO® IONIC AIR PURIFIER PRODUCT BENEFITS
Your Ionic Pro Turbo® ionic air purier delivers all these wonderful benets:
> 300% more effective than the competition*.
> Oxygen Plus™ technology turns ozone and smog into pure oxygen
> Patent-pending germicidal chamber kills bacteria and germs on contact
> Totally silent
> No lters to replace
> Easy to use
> Easy to clean
> Energy-efcient
Breathe even easier when you order additional Ionic Pro® Air Purier products today to enjoy
fresh and puried air in every room of your home everyday. See our “Ordering Ionic Pro® Air
Puriers” section in this owner’s guide for details.
SAFETy iNSTruCTiONS
EXTREMELY IMPORTANT INFORMATION:
Safety precautions should always be used when operating this or any electrical appliance.
Decrease the risk of electrocution, electric shock, injury or re by reading and following all the
warnings below:
Use only as described in this Ionic Pro Turbo® ionic air purier owner’s manual.
To reduce the risk of electric shock, do not attempt to service the product in any way other than in
the manner described in the “CLEANING & MAINTENANCE” section of this owner’s manual.
Do not use the Ionic Pro Turbo® ionic air purier outdoors.
Do not use the Ionic Pro Turbo® ionic air purier in bathrooms or other humid environments, near
replaces or in areas where ammable or combustible vapors or products may exist.
The Ionic Pro Turbo® ionic air purier operates at 120v AC and 60Hz only.
To reduce the risk of electric shock, this product has a grounding-type plug that has a third grounding
pin. This plug will t only into a grounding-type power outlet. If the plug does not t into the outlet,
contact qualied service personnel to install the proper outlet. Do not alter the plug in any way.
Always turn off all controls before unplugging the Ionic Pro Turbo® ionic air purier from outlet.
Always turn off and unplug this product from outlet before cleaning the collection blades.
Always turn this product off when not in use.
prOduCT BENEFiTS
2
Never touch the internal collection blades, electrodes,
ionizing wires, or any part of the Ionic Pro Turbo® ionic air
purier with any object capable of conducting electricity.
Do not open the main door of the Ionic Pro Turbo® ionic air
purier when it is in operation.
Attempting to dissemble the unit will cause the warranty
to be voided and could cause serious personal injury to the
user and/or result in considerable damage to the unit.
Do not place the Ionic Pro Turbo® ionic air purier’s cord
near a heated surface.
Never operate the Ionic Pro Turbo® ionic air purier if
the plug or cord is damaged or appears damaged. Only
qualied service personnel should ever replace or attempt
to replace a damaged power cord.
Never use the power cord to pick up, carry, drag, pull, or
lift the Ionic Pro Turbo® ionic air purier. Do not pull the
cord against or around sharp corners and edges. This could
result in injury to the user or damage to the cord and
is prohibited.
Always remove the plug from its power outlet by holding
onto the plug itself and pulling gently. Never pull on the
cord itself to unplug it from its power outlet.
Use care when operating the Ionic Pro Turbo® ionic air purier by keeping all ngers, body parts, hair,
loose clothing and jewelry away from openings.
Never touch the Ionic Pro Turbo® ionic air purier or its plug when your hands are wet.
Never try to insert any object into the body of the Ionic Pro Turbo® ionic air purier when
it is in operation.
The Ionic Pro Turbo® ionic air purier is an electrical appliance. Adult supervision is required
when operating the Ionic Pro Turbo® ionic air purier in the presence of children.
Do not touch the metal blades until after discharging residual electricity by touching blades
to an electrical ground such as a water pipe or metal faucet.
The collection blades should be inspected frequently and cleaned regularly to prevent
excessive accumulation that may result in an electrical ashover or a risk of re.
3
SAFETy iNSTruCTiONS
*Itw o u l d t a k e 3 o f t h e o r I g I n a l Io n I c Br e e z e ® Qu a d r a ® (SI837) t o B e a S e f f e c t I v e a S o n e Io n I c Pr o tu r B o ® B a S e d o n cadr m e a S u r e m e n t S a S
d e f I n e d B y anSI S t a n d a r d . Io n I c Br e e z e ® a n d Qu a d r a ® a r e r e g I S t e r e d t r a d e m a r k S o f th e Sh a r P e r Im a g e co r P o r a t I o n . th e Io n I c Pr o tu r B o
P r o d u c t IS n o t a S S o c I a t e d w I t h th e Sh a r P e r Im a g e co r P o r a t I o n .

iMpOrTANT WArNiNGS iMpOrTANT WArNiNGS
4 5
IMPORTANT WARNINGS
Before using your Ionic Pro Turbo® ionic air purier, please read the following
important information.
MAIN PARTS
First, please look at the “Main Parts” diagram and locate the part labeled A.
These are the collection blades and are a vital part of this amazing ionic air purifying system. The
collection blades are where unhealthy pollutants, allergens, irritants and odors are trapped when
the Ionic Pro Turbo® Ionic Air Purier is in proper working condition and in use.
READ THIS: Do not touch the metal collection blades, even when you take the collection blade
unit out for cleaning. (See “CLEANING & MAINTENANCE” section of this manual.)
Main Parts
A. COLLECTION BLADES
B. OPEN BUTTON
C. CONTROL PANEL
D. OUTER HOUSING
E. MAIN DOOR
F. POWER CORD
G. BASE
ENSURING QUIET OPERATION
The Ionic Pro Turbo® ionic air purier is designed to run quietly and requires very little time and
effort to maintain in proper working condition. If you hear excessive noise or static coming from your
Ionic Pro Turbo® ionic air purier, it generally indicates that the product needs to be cleaned. Turn off
your Ionic Pro Turbo® ionic air purier, unplug the cord and carefully follow the cleaning instructions
in this manual.
To keep your Ionic Pro Turbo® ionic air purier working properly, it will be necessary to clean the
collection blades after every month of use and the internal ionizing wires at the same time. (See
“CLEANING & MAINTENANCE” section of this owner’s manual for the proper techniques.)
WARNING: After cleaning the collection blades with soap and water, allow at least 24 hours
for the collection blades to dry thoroughly before re-inserting into the unit. (See “CLEANING
AND MAINTENANCE” section.) Water can easily get trapped along the collection blades’ many
surfaces and edges and damage could result if there is any moisture on the collection blades.
You will need to clean your Ionic Pro Turbo® ionic air purier more often if it has been exposed
to heavy pollution.
Do not place the Ionic Pro Turbo® ionic air purier near a replace. Even if a replace is not in
use, chimney dust and soot may circulate through the Ionic Pro Turbo® ionic air purier and then
re-circulate and leave a residue on the unit and surrounding areas. We recommend that you do not
place your Ionic Pro Turbo® ionic air purier near candles or oil lamps. If you intend to use candles
or oil lamps near your Ionic Pro Turbo® ionic air purier despite this warning, make sure that the
wicks are cut to no more than a quarter inch to cut down on smoke production.

Getting Ready
Locate a level surface on which to place Ionic Pro Turbo® ionic air purier and a grounded 120v
outlet. (Follow warnings described in the “SAFETY INSTRUCTIONS” section of this manual.) Position
your Ionic Pro Turbo® ionic air purier at least one foot (12 inches) from the wall. Plug in the unit.
You are now ready to turn on your Ionic Pro Turbo® ionic air purier!
1. ON/OFF Button
A LOW –output indication light (LOW)
B MEDIUM –output indication light (MED)
C HIGH –output indication light (HI)
D CLEAN –indication light (CLEAN)
2. CLEAN –wire cleaning mechanism
3. OPEN –main door button
4. CLEAN –Indication light
OpErATiNG THE iONiC prO TurBO® Air puriFiEr
Controls/Settings
1. ON/OFF BUTTON Turns unit on and off.
A LOW –This is the most cost-effective setting. Ideal for medium sized rooms, where windows
& doors rarely open.
B MED –Recommended for medium to large-sized rooms.
C HI –This maximum output setting is recommended for medium to large rooms and/or areas
exposed to heavy dust.
D CLEAN –This red light goes on when your Ionic Pro Turbo® ionic air purier needs to be
cleaned, or the unit is experiencing some other
problem. See “TROUBLE-SHOOTING” section.
Selecting Settings
1. Set up the Ionic Pro Turbo® ionic air purier as
described in “Getting Ready”.
2. Press the ON/OFF button to activate your
ionic air purier and get ready to enjoy clean,
ionized air.
3. The Ionic Pro Turbo® ionic air purier
automatically defaults to the HI (high/maximum
output) setting whenever the unit is turned on.
4. Just press the ON/OFF button one more time to
select the MED (medium) output setting and press
the ON/OFF button once again if you wish to select
the LOW output setting.
5. Press the ON/OFF button a fourth time to turn
the unit off.
6. The indicator LEDs light up to indicate your current
setting (LOW, MED, HI).
Clean Light:
The red CLEAN light will turn on and the unit will shut
down if cleaning is overdue or AC input is unstable.
The Ionic Pro Turbo® ionic air purier’s collection blades
must be cleaned after every month of use and the
internal ionizing wires must be cleaned at the same
time. (See “CLEANING & MAINTENANCE” for full
directions.) Once the collection blades are properly
cleaned, normal operation should resume.
OpErATiNG THE iONiC prO TurBO® Air puriFiEr
76

With very little effort, the Ionic Pro Turbo® ionic air purier delivers cleaner, fresher, healthier air
to your indoor environments. Keep your Ionic Pro Turbo® ionic air purier functioning properly by
cleaning the collection blades after every month of use as recommended. The internal ionizing wires
are an important part of the Ionic Pro Turbo® ionic air purifying system and need to be cleaned at
the same time or whenever you hear excessive noise. (See “TO CLEAN IONIZING WIRES” and “DEEP
CLEANING”sections.)
More frequent cleaning may be required if your Ionic Pro Turbo® ionic air purier is new or if you
place it in a different location. Exposing your Ionic Pro Turbo® ionic air purier to candle/oil lamp/
replace soot and smoke is not recommended and will require the collection blades to be cleaned
after every exposure. (See “IMPORTANT WARNINGS”.)
HELPFUL TIPS: Remember to clean your Ionic Pro Turbo® ionic air purier every month and
anytime the red CLEAN/FAULT light comes on or whenever you hear your unit begin to make
excessive noise.
To Clean the Collection Blades:
1. Turn off and unplug your Ionic Pro Turbo®
ionic air purier.
2. Let the unit rest a minute before attempting
to remove the collection blades.
3. Pull upward on the release latch of the
collection blade unit and pull out from the
main door.
4. Remove the collection blade unit.
5. Do not touch the metal blades until after
discharging residual electricity by touching
blades to an electrical ground such as a
water pipe or metal faucet.
6. Wipe away the trapped particles collected on
the three blades with a slightly damp sponge
or cloth.
7. IMPORTANT: To avoid damaging your Ionic Pro Turbo® ionic air purier, make sure the blades
are completely dry and free of all moisture and that your Ionic Pro Turbo® ionic air purier is
turned off before re-insertion. If you used a slightly damp cloth to clean the blades, it is possible
the collection blades will be completely dry within two to three hours.
READ THIS: To avoid damage, please make sure that all surfaces and edges of the
collection blades are thoroughly dry before re-inserting them into your Ionic Pro Turbo®
ionic air purier.
CLEANiNG & MAiNTENANCE
To Clean the Oxygen Plus™ lter:
1. Turn off and unplug your Ionic Pro Turbo® ionic air purier.
2. Open the main door and remove the collection blades, the
Oxygen Plus™ lter is located inside the main door.
3. Put the hose attachment of your vacuum near the Oxygen
Plus™ lter and make sure to clean without touching the
Oxygen Plus™ lter.
To Clean the Internal
Ionizing Wires:
There is an internal wire cleaner that cleans the internal
ionizing wires by sliding up and down to scrape off
particle residue.
1. Gently pull the lever up and down several times.
2. The internal ionizing wires need to be cleaned after
every two weeks of use.
98
CLEANiNG & MAiNTENANCE

DEEP CLEANING
Noisy functioning (audible loud buzzing sound) is a sign that your Ionic
Pro Turbo® ionic air purier is overdue for a complete clean-up of the
collection blades and the internal ionizing wires. The internal ionizing
wires must be kept clean to ensure silent and normal operation.
To Deep Clean:
1. Before beginning, make sure you have read all of the safety
precautions and cleaning instructions located in the “SAFETY
INSTRUCTION”, “IMPORTANT WARNINGS”, and “CLEANING &
MAINTENANCE” sections of this owner’s manual.
2. First, turn OFF and unplug your Ionic Pro Turbo® ionic air purier.
3. Let it rest for a minute before sliding out the collection blades as
described in the “To Clean the Collection Blades” section of
this manual.
4. Use a cloth and warm, sudsy water to wipe away dirt particles
on the blades’ surfaces and edges.
5. Rinse and let the blades dry thoroughly for 24 hours before
re-inserting them into your Ionic Pro Turbo® ionic air purier.
If desired, you can purchase a second set of collection blades to
use while the original blades are drying to allow for virtually
uninterrupted air purication. (See the “ORDERING EXTRA
COLLECTION BLADES” section of this owner’s manual for details.)
Cleaning External Surfaces
Over time, some particles and dust may accumulate on the external
surfaces of your Ionic Pro Turbo® ionic air purier.
If this happens:
1. Turn off and unplug the unit.
2. Mix one ounce of soap or detergent with ve ounces of water
and apply sparingly with a moist sponge to wipe the outer
case surfaces.
3. Do not allow any water to slip into the internal parts of the Ionic
Pro® Turbo ionic air purier as this could damage its functioning and
may result in injury to you.
4. Allow the unit to dry for at least 24 hours before resuming use.
TROUBLE REASON TROUBLE-SHOOTING
Indication/Setting light
does not turn on.
Machine is unplugged.
ON/OFF button has not
been pressed.
Main door not closed.
Check if plug is loose.
Press the ON/OFF button.
Close door.
Red CLEAN light is on or
the unit shuts down.
Too much dust has accumulated.
AC input unstable or overloaded.
Moisture on collection blades.
Turn off, unplug & lift the lever
to the wire cleaning mechanism
to clean the ionizing wires.
Turn off, allow unit to rest
a while to return to normal.
Temperature & moisture level
and then turn on again.
Excessive noise
generated.
Collection blades are not
installed properly.
Too much dust has accumulated.
Internal parts are wet.
Remove & replace collection
blades & press “On” button.
Clean and dry blades and
ionizing wires thoroughly.*
Keep the machine dry.
*See “CLEANING & MAINTENANCE” section.
TrOuBLE SHOOTiNG
10 11
CLEANiNG & MAiNTENANCE

12 13
LiMiTEd WArrANTy
Ozone and Your Health
After you activate your Ionic Pro Turbo® ionic air purier, you may notice a new clean scent.
Ozone is the scent you smell. Ozone is a combination of three oxygen atoms.
The Ionic Pro Turbo® ionic air purifying system utilizes an ionizing process which results in very low
ozone emission. The Ionic Pro Turbo® ionic air purier complies with U.S. safety requirements for low
ozone emission (less than 50 parts per billion) and meets the UL867 standard for consumer products.
UL867 is the U.L. standard for safety for electro-static air cleaners.
Individuals with a history of respiratory disease, asthma, heart disease, lung disease,
breathing problems or concerns about ozone should ask their doctor whether the
concentrations of ozone generated by this or other commercial ionic air puriers are
appropriate for their specic health needs.
ORDERING IONIC PRO® IONIC AIR PURIFIERS
There’s no such thing as too much clean air. Breathe even easier when you order additional Ionic
Pro® air purier products today to enjoy fresh and puried air in every room of your home
every day. Visit our website at www.ionicpro.com or call 1.800.875.8577 to order your new Ionic
Pro® air puriers today and to nd out about our entire line of exciting products.
ORDERING EXTRA COLLECTION BLADES
Enjoy virtually uninterrupted air purication by ordering an extra set of collection blades today.
This is a great way to make sure you can always have a clean and thoroughly dry set of collection
blades available to insert into your Ionic Pro Turbo® ionic air purier whenever the other blades
are being cleaned and dried for 24 hours. Visit our website at www.ionicpro.com or call
1.800.875.8577 to order your new collection blades today.
MOrE THiNGS yOu SHOuLd KNOW
ONE YEAR LIMITED WARRANTY
Your Ionic Pro Turbo® ionic air purier is
warranted to be free from defects in materials
and workmanship for one year from the
original purchase date. Should the product
have a defect in materials or workmanship,
we will repair or replace it without charge
to you (a shipping and processing fee may
apply). To obtain service under warranty, simply
call our Customer Service Center toll-free at
1.800.875.8577.
This warranty does not cover damage caused
by accident, misuse or any use other than as
intended and described in this product manual,
or damage resulting from failure to maintain
and clean this product as specied in this
product manual. This warranty applies only to
the original purchaser of the Ionic Pro Turbo®
ionic air purier.
Contact Info for Warranty Service:
Ionic Pro
P.O. Box 4134 | Los Angeles, CA | 90048
1.800.875.8577 | www.ionicpro.com
© 2006-2007 Ionic Pro, LLC. All Rights Reserved.
US Patent No. 6,855,190. Chinese Patent No. ZL
200420006826.0. European Registered Design
No. 616867-0001. Hong Kong Patent Nos. HK
1063973 and 6105471.1. Additional patents
pending worldwide.

ArBiTrATiON AGrEEMENT
THIS ARBITRATION AGREEMENT (THE “AGREEMENT”) AFFECTS YOUR LEGAL RIGHTS AND REMEDIES BY
PROVIDING THAT DISPUTES BETWEEN YOU AND THE SELLER OF THIS PRODUCT (“COMPANY”), MUST BE
RESOLVED THROUGH BINDING ARBITRATION, RATHER THAN IN A COURT. PLEASE READ THIS AGREEMENT
CAREFULLY. YOU ACCEPT THE TERMS OF THIS AGREEMENT BY RETAINING THE PRODUCT(S) SHIPPED IN
CONNECTION WITH THIS AGREEMENT (THE “PRODUCT”) FOR MORE THAN FOURTEEN (14) DAYS AFTER RECEIPT.
IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT, YOU MAY RETURN THE PRODUCT TO COMPANY
WITHIN FOURTEEN (14) DAYS OF RECEIPT AT NO COST TO YOU.
1. RESOLUTION OF CLAIMS OR DISPUTES. Any claim or dispute between you and Company (or any of Company’s
subsidiaries or afliates) arising out of or relating in any way to the Product or this Agreement shall be resolved
through nal, binding arbitration. This arbitration obligation applies regardless of whether the claim or dispute
involves a tort, fraud, misrepresentation, product liability, negligence, violation of a statute, or any other legal
theory. Both you and Company specically acknowledge and agree that you waive your right to bring a lawsuit
based on such claims or disputes and to have such lawsuit resolved by a judge or jury.
2. LIMITATION OF LEGAL REMEDIES. All arbitrations under this Agreement shall be conducted on an individual
(and not a class-wide) basis, and an arbitrator shall have no authority to award class-wide relief. You
acknowledge and agree that this Agreement specically prohibits you from commencing arbitration proceedings
as a representative of others or joining in any arbitration proceedings brought by any other person.
3. ARBITRATION PROCEDURES.
a. Before commencing any arbitration proceedings under this Agreement, you must rst present the claim or
dispute to Company by calling 818-217-2500 and asking for the Legal Department and allowing Company the
opportunity to resolve the claim or dispute. If your claim or dispute is not resolved within sixty (60) days, you
may commence arbitration proceedings in accordance with the terms of this Agreement.
b. The arbitration of any claim or dispute under this Agreement shall be conducted pursuant to the American
Arbitration Association’s (“AAA”) United States Commercial Dispute Resolution Procedures and Supplementary
Procedures for Consumer-Related Disputes. These rules and procedures are available by calling the AAA or by
visiting its web site at www.adr.org.
c. The arbitration of any claim or dispute under this Agreement shall be conducted in the State of California or
the location in which you received this Agreement.
d. All administrative expenses of arbitration proceedings commenced under this Agreement shall be divided
equally between you and Company, except that: (a) if the claim or dispute that is the subject of the arbitration
proceedings is less than ten thousand dollars (US$10,000), you will be responsible for no more than one
hundred twenty-ve dollars (US$125) in administrative expenses; (b) if the claim or dispute that is the subject of
the arbitration proceedings is more than ten thousand dollars (US$10,000) but less than seventy-ve thousand
dollars (US$75,000), you will be responsible for no more than three hundred seventy-ve dollars (US$375) in
administrative expenses; and (c) if the claim or dispute that is the subject of the arbitration proceedings is more
than seventy-ve thousand dollars (US$75,000), then you will be responsible for administrative expenses in
accordance with the Commercial Fee Schedule provided by the AAA. You acknowledge and agree that each party
shall pay the fees and costs of its own counsel, experts and witnesses.
4. CHOICE OF LAW. This Agreement shall be governed by the United States Federal Arbitration Act and the laws
of the state of California.
5. SEVERABILITY. If any provision of this Agreement is declared or found to be unlawful, unenforceable or void,
such provision will be ineffective only to the extent that it is found unlawful, unenforceable or void, and the
remainder of the provision and all other provisions shall remain fully enforceable.
NOTES
14 15

NOTES NOTES
16 17

TP6042808