Make sure the thumbscrew
is snug before mounting
any accessories.
Do not overweight OutRig
Post (10 lb. maximum).
When OutPost™ Grill is
hot, do not mount over the
table surface.
Do not lean or sit on
accessories mounted to
OutRig Post.
Do not over tighten the
thumb screw.
!FOR YOUR
SAFETY
INSTRUCTIONS
The OutRig Post is designed to work with the T-track system
on the Breeo X Series Table. This convenient device allows
you to mount your Outpost Grill on the X Series table for
food preparation/serving or storage. The OutRig Post can
also be mounted on any railing or edge .5”- 1” thick.
USE & CARE
Position OutRig Post “U” bracket horizontally with edge of
table top.
Align thumb screw on OutRig Post with T-track slot on
underside of table.
Slide OutRig Post onto the edge of the table.
Slide to desired location.
Tighten thumb screw on bottom into T-track until snug.
You can now mount your Outpost Grill to the vertical post for
food preparation/serving or the horizontal post for storage.
Clean with dish soap and warm water.
