Otto Wilde GRILL STAND User manual

ASSEMBLY INSTRUCTIONS
Grill stand and storage space for The Otto Grill
GRILL STAND
OTTO’S

WELCOME
TO THE FAMILY
2

THE OTTO GRILL STAND
Congratulations on your purchase of Otto Wilde’s Storage
Module and thank you for becoming a part of the grill
revolution. With our Storage Module the name says it all.
They are the perfect option for storing all of your grilling
and outdoor accessories. Much like you find inside in the
kitchen, Otto oers you the option of a cabinet for storing
your larger items or a set of drawers for those smaller
items. With its 100 % stainless steel construction it’s the
perfect option to keep you organized and from having to
run into the house to get something. The best part is the
spacious counter top that can easily be wiped clean due
to it also being made of high-grade stainless steel. Many
of the features were developed with the help of the grea-
test community in the world, and now you’re a part of this
community. Thank you for joining the family.
Your Otto, Alex, Julia and Nils
3

4x M5 X 10 Screw
D
TOOLS YOU WILL NEED
SCOPE OF DELIVERY
CORE
Here is a list of parts that
are exemplary for your
S24. Quickly check that all
the pieces are there and
use the screws supplied.
1x Base
16x M6 X 16 Schraube
C
4x Module Connector Screw
G
32x M5 X 12 Screw
A
J1J2J3
1x Hex Key 1x Torx Key TX20 1x Torx Key TX15
1x Side Wall Right 1x Side Wall Left
1x Back
! Start all screws by hand
first and then finishing
tightening with the tool
provided or similar.
4

PLEASE
ONLY
USE THE
MARKED
SCREWS.
1x Counter Top
4x Adjustable Castor
1x Base Closure
1x Gas Bottle Basket
1x Toeboard Back
1x Toeboard Left
1x Cross Brace Top1x Rubber Protect Ring
1x Toeboard Right
1x Cross Brace
1x Toeboard Front
5

1 x
1 x
1 x
A2 x
1
2
ASSEMBLY
CORE
A
A 5 x
If you want to install
drawers in your
module, we recom-
mend you install
the rails before this
step.
6

1 x
3
A
A 5 x
7

A 4 x
A
A
4
8

A
1
A
ASSEMBLY
CROSS BRACES
A 2 x
1 x
9

1 x
A 4 x
2
A
10

4 x
C 16 x
12
Be sure to place the
washers on the screws
as shown here in order
to ensure proper fas-
tening of the castors.
1
For mobile use use
these mounting holes
(1) and for stationary
installation these
mounting holes (2).
C
ASSEMBLY
CASTORS
11

1 x
A 4 x
1
A
ASSEMBLY
FLOOR
12

1 x
1
INSTALLATION
TOP
13

A 2 x
A
2
14

1 x
1 x
1 x
Move your Storage
Module into position
and be sure to positi-
on the caster with the
wheel pointing to the
center of the Module
before lowering the
foot and attaching the
toeboard.
ASSEMBLY
TOEBOARDS
1
15

1 x
D4 x
A 4 x
D
A
2
D
16

ASSEMBLY INSTRUCTIONS
DRAWER
PAGE 18
ASSEMBLY
DRAWERS & DOORS
ASSEMBLY INSTRUCTIONS
DOOR
PAGE 22
17

SCOPE OF DELIVERY
DRAWER
Here is a list of accessories
for the 16 " drawer. Quickly
check that all the parts are
there and use the screws
supplied.
17x Screw M4 X 8* 1x Drawer Body 16 "
1x Drawer Front 16 " 2x Drawer Slide
B
x4
TOOLS YOU WILL
NEED
Torx TX20*
Torx TX20*
* It is possible that
some deliveries are
made with Phillips
screws.
GRILL STAND WITH
4 DRAWERS
Repeat the following steps for all 4 drawers.
18

1 x
1 x
B 6 x
ASSEMBLY
DRAWER
1
B
19

2x
B8x
2
KLICK
Snap the soft-close
mechanism of the rail
forward to tighten the
rear two screws.
B
20