Breville Kitchen Wizz 16 User manual

the Instraction Book™
Instruction Book – B#####
the Kitchen Wizz™16
Instruction Book – BFP810

2
BREVILLE
RECOMMENDS
SAFETY FIRST
At Breville we are very safety
conscious. We design and
manufacture consumer
products with the safety of you,
our valued customer, foremost
in mind. In addition we ask
that you exercise a degree of
care when using any electrical
appliance and adhere to the
following precautions.
IMPORTANT
SAFEGUARDS
READ ALL INSTRUCTIONS
BEFORE USE AND SAVE FOR
FUTURE REFERENCE
• Blades, cutting disc, and
dicing blade are sharp.
Handle them carefully.
• Remove and safely discard
any packaging materials
and promotional labels
before using the appliance
for the first time.
• To eliminate a choking
hazard for young children,
remove and safely discard
the protective cover fitted
to the power plug of this
appliance.
• To protect against
electrical shock, do not
immerse the power cord,
power plug or motor base
in water or any other liquid.
• Do not place the appliance
near the edge of a
countertop or table during
operation. Ensure the
surface is level, clean and
2 Breville Recommends Safety First
8 Components
10 Assembly
13 Functions
15 Tips
17 Care & Cleaning
18 Troubleshooting
Contents

3
free of water. Vibration
during operation may
cause the appliance to
move during use.
• Do not place the appliance
on or near a hot gas or
electric burner, or where
it could touch any other
source of heat.
• Do not use on a sink.
• Always make sure the food
processor is completely
assembled before
operating. The appliance
will not operate unless
properly assembled.
• Ensure the appliance
is switched OFF, and
unplugged from the power
outlet before attaching any
accessories, including any
blades or discs.
• Handle the food processor
and attachments with care.
Blades and discs are razor-
sharp and should be kept
out of reach from children.
• Always secure the
processing bowl onto
the motor base before
attaching the blades
or discs.
• Do not allow the power
cord to hang over the edge
of a table or counter, touch
hot surfaces or become
knotted. Unwind the power
cord fully before use.
• Keep hands as well as
spatulas and other utensils
away from moving blades
or discs while processing
food, to prevent the
possibility of severe
personal injury or damage
to the food processor.
A plastic spatula may be
used, but only when the
food processor is stopped.
• Ensure the appliance
motor is off and unplug the
power cord from the outlet
before removing the lid
from the processing bowl.
• Avoid contact with moving
parts. Never push food
down by hand when slicing
or shredding. Always use
pusher.

4
• Do not fill the processing
bowl above the marked
maximum fill line for each
type of the ingredients.
Failing to follow this
instruction may cause
product malfunction,
product damage or
personal injury due to
damage to the cover
or bowl.
• Never store any blade or
disc on motor shaft. To
reduce the risk of injury,
never place cutting blade
or discs on the shaft
without first putting bowl
properly in place. Store
blades and discs, as you
would sharp knives, out of
reach of children.
• Be sure lid is securely
locked in place before
operating food processor.
• Never try to override or
tamper with lid interlock
mechanism.
• Always remove the plug
from the power outlet if
the appliance is not in
use, before attempting to
move the appliance, before
cleaning, disassembling,
assembling and when
storing the appliance.
• Some stiff mixtures, such
as dough, may cause the
processing blade to rotate
more slowly than normal.
If this happens, do not
process for longer than
1 minute.
• Do not process hot or
boiling liquids – allow to
cool to room temperature
before placing into the
processing bowl.
• Do not move appliance
while in operation.
• Do not place any part of
the food processor in a
microwave oven.
• Always add drier or
thicker ingredients to the
processing bowl prior to
adding fluids.
• Never remove the lid while
the appliance is operating.
Always use the POWER
or PAUSE buttons to stop

5
the machine before lid
removal.
• Care should be taken
when removing the food
from the processing bowl
by ensuring the motor
and blade / disc has
completely stopped before
disassembling.
Ensure the POWER button
has been pressed to switch
the motor off and unplug
the power cord from
the power outlet before
removing the lid from
the processing bowl. The
processing bowl should
then be unlocked from
the motor body and the
blade / disc should be
carefully removed before
attempting to remove the
processed food.
• Do not use harsh abrasive,
caustic cleaners or oven
cleaners when cleaning the
appliance.
• Strictly follow the care
and cleaning instructions
described in this book.
• To avoid possible
malfunction of bowl
switch, never store the
food processor with
pusher assembly in
locked position.
• This appliance is for
household use only.
Do not use the appliance
for anything other than
its intended purpose as
described in this book.
Do not use outdoors.
Do not use in moving
vehicles or boats.
• The use of attachments
not sold or recommended
by Breville may cause fire,
electric shock or injury.
• Do not leave the appliance
unattended when in use.
• Ensure the motor
and blade / disc have
completely stopped
before disassembling.
Ensure the POWER button
has been pressed to switch
the motor off and unplug
the power cord from the
power outlet when not

6
in use, if left unattended
and before assembling,
cleaning or storing.
• This appliance is not
intended for use by
children or by persons with
reduced physical, sensory,
or mental capabilities, or
lack of experience and
knowledge.
• Close supervision is
necessary when any
appliance is used near
children.
• Children should be
supervised to ensure that
they do not play with the
appliance.
• Regularly inspect the
power cord, power plug
and actual appliance
for any damage. Do
not operate if damaged
in any way or after the
appliance malfunctions.
Immediately cease use
of the appliance and visit
www.breville.com or call
Breville Consumer Support
for examination, repair or
adjustment.
• For any maintenance other
than cleaning, visit
www.breville.com or
call Breville Consumer
Support.
• If the power outlet is
a standard 2-prong
wall outlet, it is your
personal responsibility
and obligation to have it
replaced with a properly
grounded 3-prong wall
outlet.
• Do not, under any
circumstances, cut or
remove the third (ground)
prong from the power cord
or use an adapter.
• Consult a qualified
electrician if instructions
are not completely
understood, or if doubt
exists as to whether the
appliance is properly
grounded.

FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS
7
SHORT CORD
INSTRUCTIONS
Your Breville appliance
is fitted with a short
power supply cord to
reduce personal injury or
property damage resulting
from pulling, tripping or
becoming entangled
with a longer cord.
If an extension cord is used,
(1) the marked electrical
rating of the cord set or
extension cord should
be at least as great as the
electrical rating of the
appliance, (2) the cord
should be arranged so that
it will not drape over the
countertop or table-top
where it can be pulled
on by children or tripped
over unintentionally and
(3) the extension cord
must include a 3-prong
grounding plug.
BREVILLE ASSIST®PLUG
Your Breville appliance
comes with a unique
Assist®Plug, conveniently
designed with a finger hole
to ease removal from the
power outlet.
For safety reasons it is
recommended you plug
your Breville appliance
directly into its own
electrical outlet on a
dedicated circuit separate
from other appliances. If the
electric circuit is overloaded
with other appliances, your
appliance may not function
properly.

8
Components
A. Small food pusher
For improved processing control of smaller
ingredients. It also doubles as a measuring
cup. The food processor will run continually
whether the small pusher is in or out.
B. Medium pusher
The food processor will run continually
whether the medium pusher is in or out.
C. Large food pusher
For pushing food down the feed chute.
The food processor will not start unless the
large pusher is correctly in place.
D. Extra wide 14 cm chute
For larger ingredients.
E. Feed chute safety system
Prevents the motor from operating unless
the bowl and lid are correctly locked in
position, and large feed pusher is inserted.
F. Processing Lid with silicone seal
Locks onto the processing bowl.
G. Mini bowl with silicone seal
H. Main bowl with handle
The bowl locks onto the motor base.
I. PLAY | PAUSE button
Press to start and pause operation of
the motor.
J. PULSE button
Press down and hold briefly for short bursts
of power. The motor will automatically stop
after the PULSE button has been released.
K. Screen display
Displays the timer.
L. POWER button
M. Count up & count down timer
Used to set desired time required for
processing. Can count up or down, stopping
the processor once the time is reached in
count down mode.
N. Powerful induction motor base
Induction motor with safety braking system.
O. Non-skid rubber feet
For added safety and stability.
A
B
C
D
E
F
G
I
J
K
H
N
O
L
M

9
P. Dough blade
Soft material blade for kneading dough.
Q. Quad®blade™
Swift action for even chopping, mixing,
whipping and processing a variety of
ingredients.
R. Mini processing blade
Attach to the mini spindle and use this
blade for small quantities with the mini
bowl for chopping, mixing and blending a
variety of ingredients.
S. Adjustable slicer
Use this disc for slicing ingredients.
Able to slice from 0.3 mm – 8.0 mm thick.
T. French fries cutter
Use this disc to cut ingredients into French
fry shape.
U. Reversible shredder
Use one side of this disc for fine shredding
and the other side for coarse shredding.
V. Large disc spindle
Attaches to main bowl and discs such as
reversible shredder, French fry and
adjustable slicer.
W. Mini disc spindle
Attaches to mini blade or discs and use with
mini bowl.
X. Storage box
To store all accessories.
Y. Plastic spatula
To scrape ingredients from the sides of
bowls (both the main and mini bowls).
Z. Cleaning brush
To aid with cleaning bowls, blades, discs
and other attachments.
P
Q
R
S
T
U
V W
X
Y
Z

10
Assembly
ASSEMBLY
Motor Base and Bowl
1. Position the processing bowl onto the
motor base with the handle in line with
the ALIGN HANDLE graphic on the
motor base.
2. Turn the bowl clockwise until the handle
locks to the front. The processing bowl
should now be securely locked into position.
The food processor will not operate unless
the bowl is locked into position correctly.
BEFORE FIRST USE
• Before using your food processor for the
first time, remove any packaging material
and promotional labels. Ensure the POWER
button is OFF and the food processor is
unplugged.
• Be careful when handling the blades and
discs as they are extremely sharp.
• Wash the processing bowl, processing lid and
all attachments in warm soapy water with
a soft cloth. Rinse and dry thoroughly. All
attachments except the geared spindle may
be washed in the dishwasher.
• When first using your food processor, you
may notice an odor coming from the motor.
This is normal and will dissipate with use.
• Always use the food processor on a dry,
level work surface.