Breville VKJ507 User manual

Product safety
Please read these instructions before operating the appliance
and retain them for future use.
This product is not suitable for use by children, and may not be
suitable for persons requiring supervision unless they receive
instruction by a competent person on how to safely use the
product.
Children should be supervised to ensure that they do not play with
the product.
This appliance generates heat during use. Adequate precaution
must be taken to prevent the risk of burns, scalds, res or other
damage to persons or property caused by touching the exterior
whilst in use or during cooling.
Never use this appliance for anything other than its intended use.
This appliance is for household use only. Do not use this appliance
outdoors.
Always ensure that hands are dry before handling the plug or
switching on the appliance.
Always use the appliance on a stable, secure, dry and level
surface.
Never use a power base other than the one supplied with the
appliance.
This appliance must not be placed on or near any potentially hot
surfaces (such as a gas or electric hob).
The power cord is not replaceable by the user. Always return the
appliance if the power cord is damaged to avoid any hazard.
Do not use the appliance if it has been dropped, if there are any
visible signs of damage or if it is leaking.
Ensure the appliance is switched off and unplugged from the
supply socket after use and before cleaning.
Always allow the appliance to cool before cleaning or storing.
Never immerse any part of the appliance or power cord and plug in
water or any other liquid.
Never let the power cord hang over the edge of a worktop, touch
hot surfaces or become knotted, trapped or pinched.
Never leave the appliance unattended when in use.
Beware of steam coming from the spout or lid especially during
relling. Never open the lid during the boiling cycle.
Never ll the appliance when it is positioned on the power base.
Never ll the kettle above the MAX marking. If the kettle is
overlled, boiling water may be ejected.
Never use the kettle without sufcient water in the kettle for it to
operate correctly.
Never allow the appliance to boil dry.
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
Before using for the rst time
Remove any packaging and promotional material from your kettle and
position it on a stable, secure, dry and level work surface away from the
edge.
Before connecting to a power source, make sure your mains supply
voltage is the same as the one indicated on the appliance. Connect the
plug to a suitable power outlet and make sure that the power cord does
not overhang the work surface. Excess power cord can be stored in the
power base.
Fill your kettle to the maximum mark and close the lid.
Place the kettle back onto the power base. Switch the kettle on, allow
it to boil then discard the water. Repeat twice. This will remove any
residue left over from the manufacturing process.
•
•
Using your kettle
If this kettle is lled above the maximum level mark, hot
water may be ejected from the spout during boiling. Beware of
steam coming from the spout or lid especially during relling.
Never open the lid when the kettle is boiling.
With the kettle switched off, plug the power base into a suitable
power outlet.
Remove the kettle from the power base before lling it with water.
Do not ll the kettle through the spout.
Fill the kettle with water. Don’t overll the kettle and always ensure
that there is sufcient water in the kettle for it to operate correctly.
This is approximately 250ml or 1 teacup full. Always check the
water level when the kettle is positioned on its power base.
Make sure that the lid is closed correctly to ensure safe operation.
When the kettle is switched on, the water level window will
illuminate.
When the water reaches boiling point, the kettle will switch off
automatically.
You may also switch the kettle off manually at any time by moving
the switch to the off position.
Always use caution when carrying or pouring water from your
kettle when it is full of hot or boiling water.
If your kettle boils dry
If the kettle is operated with insufcient water a built in fail-safe device
will automatically switch off the kettle.
Unplug the kettle and allow it to cool. When the kettle has cooled
down sufciently the device will reset itself.
Once the device has reset, rell the kettle with cold water and use
it as normal.
Energy saving hints and tips
A Breville kettle, if used correctly, is a very energy efcient device.
Why not try some of these energy saving tips:
Only boil the water you need. Overlling your kettle by one cup is
the equivalent to using an energy saving light bulb for one hour!
It is not always necessary to re-boil your kettle. For example, one
litre of water will still be at 90°C after ve minutes - the perfect
temperature for a cup of coffee.
1.
2.
3.
4.
5.
6.
7.
•
•
•
•
q
w
e
t
y
1 Spout
2 Lid
3 Lid release button
4 On/off switch
5 360° rotational power base with cord storage
6 Easy clean, fast boil concealed element
7 Water level window
r
©Pulse Home Products Limited. Breville is a registered trademark of Pulse Home Products Limited. Breville have a policy of continuous improvement and we reserve the right to change specications without notice. Pulse Home Products Limited, Royton, Oldham OL2 5LN, UK.
u

Care and cleaning
Always unplug the kettle from the mains supply socket and
allow it to completely cool down before cleaning or descaling it.
Do not immerse the kettle, power base or power cord and plug
in water or any other liquid.
Clean the exterior surface of the kettle with a damp cloth and then
polish with a soft dry cloth. Do not use steel wool pads or harsh/
abrasive cleaners.
Descale your kettle regularly to keep it working efciently. Use
a proprietary descaling product following the manufacturer’s
instructions carefully.
Cleaning the lter
Open the lid and remove the lter from behind the spout.
Rinse the lter under a tap whilst brushing it with a soft brush. In
hard water areas it may be necessary to descale the lter using a
descaling agent.
Use a proprietary descaling product following the manufacturer’s
instructions carefully. The lter may be washed safely in the
cutlery rack of a dishwasher.
Ret the lter back into the kettle.
Replacement lter
A replacement lter can be obtained by phoning our Customer
Service Department on 0161 621 6900. They will give you up to date
prices, inclusive of VAT and postage and packaging.
Filter part number 91345
Guarantee
This product is guaranteed for a period of 1 year from the date of
purchase against mechanical and electrical defects.
This guarantee is only valid if the appliance is used solely for
domestic purposes in accordance with the instructions provided, that
it is not connected to an unsuitable electricity supply, dismantled or
interfered with in any way or damaged through misuse. Under this
guarantee we undertake to repair or replace free of charge any parts
found to be defective.
Nothing in this guarantee or the instructions relating to the product
excludes, restricts or otherwise affects your statutory rights.
In line with our policy of continuous development, we reserve the right
to change this product, packaging and documentation without notice.
1.
2.
•
•
•
•
Electrical safety
This appliance must be earthed.
This appliance is tted with either a moulded or rewirable BS1363, 13
amp plug. The fuse should be rated at 13 amps and be ASTA approved
to BS1362. If the fuse in a moulded plug needs to be changed, the fuse
cover must be retted. The appliance must not be used without the fuse
cover tted.
If the plug is unsuitable, it should be dismantled and removed from
the supply cord and an appropriate plug tted as detailed below. If you
remove the plug it must not be connected to a 13 amp socket and the
plug must be disposed of immediately.
If any other plug is used, a 13 amp fuse must be tted either in the plug
or adaptor or at the distributor board.
Plug should be BS1363 approved
Fit a 13 Amp Fuse
Ensure that the outer sheath of the cable is rmly held by the clamp
BROWN
(Live)
13 Amp
Fuse
BLUE
(Neutral)
GREEN/YELLOW
(Earth)
After sales service
To return a faulty appliance to our Customer Service Department:
Pack it carefully (preferably in the original carton). Ensure the unit is
clean.
Enclose your name and address and quote the model number on all
correspondence. Give the reason why you are returning it.
If within the guarantee period, state when and where it was
purchased and include proof of purchase (e.g. till receipt).
Send it to our Customer Service Department at the address below:
Customer Service Department
Pulse Home Products Limited
Middleton Road
Royton
Oldham
OL2 5LN, UK.
Telephone: [phone] Fax: [phone]
e-mail: [email protected]
1.
2.
3.
4.
VKJ507_Iss_2 05/11 93321-1