Breville The Banquet Pan BEF250 User manual

the Banquet Pan™
Instruction Book - BEF250

2
BREVILLE
RECOMMENDS
SAFETY FIRST
At Breville we are very safety
conscious. We design and
manufacture consumer
products with the safety of you,
our valued customer, foremost
in mind. In addition we ask
that you exercise a degree of
care when using any electrical
appliance and adhere to the
following precautions.
IMPORTANT
SAFEGUARDS
READ ALL INSTRUCTIONS
BEFORE USE AND SAVE
FOR FUTURE REFERENCE
• Remove and safely discard
any packaging material and
promotional labels before use.
• To eliminate a choking hazard
for young children, remove and
safely discard the protective
cover fitted to the power plug
of this appliance.
• Always ensure the appliance
is properly assembled before
use. Follow the instructions
provided in this book.
• Do not touch hot surfaces.
Appliance surfaces are hot
during and after operation.
To prevent burns or personal
injury, always use protective
hot pads or insulated oven
mitts, or use handles or knobs
where available.
• Do not place the appliance near
the edge of a bench or table
during operation. Ensure that
the surface is dry, level, clean
and free of any liquid and
other substances.
2 Breville Recommends Safety First
6 Components
7 Functions
9 Care & Cleaning
Contents

3
• Always operate the appliance
on a stable and heat resistant
surface. Do not use on a
cloth-covered surface, and
position the appliance at a
minimum distance of 20cm
away from walls, curtains,
cloths and other heat
sensitive materials.
• Do not place this appliance
on or near a hot gas or electric
burner, or where it could touch
a heated oven.
• Do not operate the appliance
on a sink drain board.
• When operating the appliance,
ensure the power cord is kept
away from any heat source
including the surface of
the appliance.
• Do not touch hot surfaces.
Use the handles for lifting and
carrying the frypan.
• Always fully insert temperature
control probe into probe socket
before inserting power plug
into the power outlet and
switching on. Ensure the probe
socket is completely dry before
inserting the temperature
control probe.
• The frypan must be used
with the temperature probe
provided. Do not use any
other temperature probe
or connector.
• Ensure the temperature control
probe has cooled before
removing it from the appliance.
• Always remove the
temperature control probe
before cleaning the appliance.
• If using plastic utensils, do not
leave in the frypan when hot.
• Do not place hot glass lid
under cold water.
• Do not place anything on top
of the appliance lid when the
lid is closed, when in use and
when stored.
• Extreme caution must be used
when the appliance contains
hot oil or other liquid.
Do not move the appliance
during cooking. Allow the
frypan to cool before removing
oil or other liquid.
• Do not use harsh abrasives,
caustic cleaners or oven
cleaners when cleaning this
appliance. Keep the appliance
clean and refer to care and
cleaning section.
• Do not leave the appliance
unattended when in use.
• Never immerse cord and/
or heat probe in water or any
other liquid.

4
• Do not attempt to operate
the appliance by any method
other than those described in
this booklet. Do not leave the
appliance unattended when
in use.
• Always have the glass lid
positioned correctly on the
frypan throughout operation of
the appliance unless stated in
the recipe to have it removed.
• The glass lid has been specially
treated to make it stronger,
more durable and safer than
ordinary glass, however it
is not unbreakable. If struck
extremely hard, it may break
or weaken and could at a later
time shatter into many small
pieces without apparent cause.
• To protect against electric
shock, do not immerse the
temperature control probe,
power cord, power plug or
appliance in water or any
other liquid.
• Always turn the probe to the
MINIMUM position, switch off
at the power outlet, remove the
plug and allow all parts to cool
before attempting to move the
appliance, when the appliance
is not in use, before cleaning
and when storing.
IMPORTANT
SAFEGUARDS
FOR ALL
ELECTRICAL
APPLIANCES
• Unwind the power cord fully
before use.
• Do not let the power cord hang
over the edge of a bench or
table, touch hot surfaces or
become knotted.
• Connect only to a 230V or
240V power outlet.
• The appliance is not
intended for use by persons
(including children) with
reduced physical, sensory
or mental capabilities, or
lack of experience and
knowledge, unless they have
been given supervision or
instruction concerning use
of the appliance, by a person
responsible for their safety.
• Children should be supervised
to ensure that they do not play
with the appliance.

5
• It is recommended to regularly
inspect the appliance. Do not
use the appliance if the power
cord, power plug or appliance
becomes damaged in any way.
Return the entire appliance to
the nearest authorised Breville
Service Centre for examination
and/or repair.
• Any maintenance, other than
cleaning, should be performed
at an authorised Breville
Service Centre.
• This appliance is for household
use only. Do not use this
appliance for other than its
intended use. Do not use in
moving vehicles or boats.
Do not use outdoors.
Misuse may cause injury.
• The appliance is not intended
to be operated by means of
an external timer or separate
remote control system.
• Always switch appliance off,
then switch off at he power
outlet, then unplug the
appliance when not in use,
before attempting to move
appliance and before cleaning.
• The installation of a residual
current device (safety switch)
is recommended to provide
additional safety protection
when using electrical
appliances. It is advisable
that a safety switch with a
rated residual operating
current not exceeding 30mA
be installed in the electrical
circuit supplying the appliance.
See your electrician for
professional advice.
WARNING
Do not operate the frypan on
an inclined surface. Do not
move the frypan while it is
switched on.
SAVE THESE INSTRUCTIONS

6
Components
D
B CA
EFG
A. Dishwasher safe glass lid
With adjustable steam vent.
B. Large rectangular 38cm x 29.5cm frypan
C. Extra deep 78mm pan
D. Cool touch handles
E. High quality non-stick cooking surface
F. Powerful 2200 watt die-cast element
G. Non-slip feet
H. Temperature control probe
With 4 heat settings including SEAR.
I. Pan tilt lever
H I

7
Functions
BEFORE FIRST USE
Remove any promotional materials and
packaging materials before use. Wash your
frypan and lid in hot soapy water. Rinse and
dry thoroughly.
Do not immerse the cord, plug and/or
Temperature Control Probe in water or any
other liquid.
1. Insert the Temperature Control Probe into
the probe socket on the appliance. Plug into
a 230/240V power outlet and switch ‘On’.
Always insert the probe into the appliance
first, then insert plug into power outlet.
NOTE
Before inserting the Temperature Control
Probe into the probe socket, ensure the interior
of the socket is completely dry. To do this,
shake out excess water then wipe the interior of
the socket with a dry cloth.
2. Turn the dial on the Temperature Control
Probe clockwise to the desired setting.
The red heating light on the probe will
illuminate.
3. The red heating light will remain
illuminated until the frypan reaches the
desired temperature. Once the temperature
has been reached, the red light will cycle
‘On’ and ‘Off’ during cooking to maintain
the desired temperature.
4. When cooking is completed, turn the dial
anti clock-wise until the MINIMUM line is
aligned with the red heating light.
Cooking
Off
Switch off at the power outlet and unplug.
5. Leave the Temperature Control Probe
connected to the appliance until cool.
NOTE
This frypan must be used with the
Temperature Control Probe provided.
Do not use any other probe or connector.

8
RECOMMENDED HEAT CONTROL
PROBE SETTINGS
DIAL SETTING USES
KEEP WARM • Keeping food warm
• Basting
SAUTE • Browning nuts
• Caramelising vegetables
and onion
• Pancakes and crepes
• Rice and pasta
PAN FRY • Sealing steaks and roasts
• Shallow frying
SEAR • Steaming
• High Sear

9
Care & Cleaning
Do not leave plastic cooking utensils in contact
with the hot frypan surface while cooking.
Before cleaning, switch the frypan to the off
position and unplug from the power outlet.
Remove the Temperature Control Probe when
cooled from the probe socket of the appliance.
TEMPERATURE CONTROL PROBE
If cleaning is necessary, wipe the Temperature
Control Probe over with a slightly damp cloth.
Ensure it is completely dry before use.
Never immerse the Temperature Control
Probe, plug or cord in water or any other liquid.
NON-STICK COOKING SURFACE
Cooking on a non-stick surface minimises the
need for oil as food does not stick and cleaning
is easier.
Any discolouration that may occur on the
non-stick surface may detract from the
appearance of the frypan but will not affect the
cooking performance.
Do not use metal (or other abrasive) scourers
when cleaning the non-stick coating.
Wash with hot soapy water. Remove stubborn
spots with a soft plastic washing pad or nylon
washing brush. Rinse and dry thoroughly.
REMOVING DISCOLOURATION OF
THE NON-STICK SURFACE
1. Combine 2 tablespoons bicarbonate of
soda, ¼ cup household bleach, 1 cup water.
2. Pour into the frypan, place lid on with the
vent closed, and simmer for 5–10 minutes.
3. Clean in a well-ventilated area and avoid
breathing in the vapours. Wash as directed
before re-use. In some instances this may
not remove all the staining.
GLASS HIGH DOMED LID
Wash the lid in warm soapy water using a soft
sponge, rinse and dry thoroughly.
NOTE
Take care when the glass lid is hot. Do not
place hot lid under cold water or on cold
surfaces. This may cause the lid to break.
NOTE
Before inserting the temperature control probe
into the frypan socket, ensure the interior of
the frypan socket is fully dry. To do this, shake
out excess water then wipe the interior of the
socket with a dry cloth.
STORAGE
Store the temperature control probe carefully.
Do not knock or drop it as this can damage
the probe. If damage is suspected, return the
temperature control probe to your nearest
Breville Service Centre for inspection.
TIPS
For convenient storage of the temperature
probe, line the frypan with 2 sheets of kitchen
paper and place the probe on the kitchen
paper. This will ensure the probe and plug
don’t scratch the surface.

10
Notes

Web: www.breville.co.nzWeb: www.breville.com.au
Breville is a registered trademark of Breville Pty. Ltd. A.B.N. 98 000 092 928.
Copyright Breville Pty. Ltd. 2015.
Due to continued product improvement, the products illustrated/photographed
in this brochure may vary slightly from the actual product.
BEF250 ANZ – A15
Australian Customers
Mail: Locked Bag 2000
Botany NSW 1455
AUSTRALIA
Phone: [phone]
Fax: [phone]
Email: Customer Service:
[e-mail]
New Zealand Customers
Mail: Private Bag 94411
Botany Manukau 2163
Auckland NEW ZEALAND
Phone: [phone]
Fax: [phone]
Email: Customer Service:
[e-mail]
Breville Customer Service Centre