Brightz Cosmic User manual

Cosmic Brightz™
Instructions
© Copyright Brightz, Ltd. 2018
All rights reserved
Step 1 – Install Batteries
Open latches on the side of the battery pack to access batteries. Install 3 fresh AA batteries,
observing correct polarity (+/-). Close the battery pack, making sure the latches snap shut.
Do not mix old and new batteries and do not mix alkaline, standard (carbon-zinc) or rechargeable
(nicad, ni-mh, etc.) batteries.
Caution: Batteries may explode or leak, and cause burn injury if recharged, disposed of in fire,
mixed with a different battery type, or inserted backwards. Replace all used batteries at the same
time. Clean battery contacts and contacts on the device prior to installing. Remove batteries if item
will not be used for long periods of time. When battery expires remove promptly.
Step 2 – Select a Location
Choose a location to mount the battery pack, away from moving parts.
Latches

Step 3 – Install Battery Pack
Take the silicon strap and loop one of the end holes over the T-hook on the side of the battery pack.
Place the battery pack against the frame of the bike, pull the silicon strap around the frame, and
secure it on the other T-hook.
Warning: Do not mount the battery pack near or on moving parts, or where it has the potential to
interfere with moving parts.
Step 4 – Install Lights
Wrap the lights around the parts of the frame you wish to light up.
Warning: Do not string lights on or in proximity of moving parts. Do not mount in any area that would
prevent turning, like the handlebars.
Step 5 – Secure Lights
Secure the end of the light string with the included wire tie, with one LED light placed after the wire
tie.
Brightz, Ltd.
8000 Yankee Road, Suite 225, Ottawa Lake, MI 49267
Email: [e-mail]
Visit us at www.brightz-ltd.com for more fun products!