Brightz Wheel Cardz User manual

Wheel Cardz™by Brightz
Instructions
© Copyright Brightz, Ltd. 2019
Patent Pending • All rights reserved
Step 1 – Placement
Select a position on the bike where you want to place
Wheel Cardz™. See diagram for recommended
placement.
Loosen the screw on the clamp to open it. Position the
clamp around the bike frame so that the clip mouth is
facing the wheel spokes and tighten the screw.
Step 2 – Insert Card
Insert any card into the clip, making sure the card is secured in both sets of rubber teeth. Adjust the card
and clamp so that about 1/4" inch of the card is in between the spokes.
Rubber Teeth

Optional:
Step 3 – Remove Clip from Clamp
The clip can be separated from the clamp for easy removal
to avoid theft.
•To remove the clip, pull the tab outwards and slide
to release.
•To replace the clip, slide into place until the tab
clicks.
- Do not operate the product while the bike is being pedaled or any part of the bicycle is in motion.
- Do not mount Wheel Cardz™ on any moving part of the bicycle (e.g., gears, pedals, chain, brakes).
- This product is designed for use on bicycles only. Improper installation of product will interfere with bicycle operation.
Brightz, Ltd.
8000 Yankee Road, Suite 225, Ottawa Lake, MI 49267
Email: [e-mail]
Visit us at www.brightz-ltd.com for more fun products!
1. Pull tab
2. Slide Clip
2. Slide Clamp