brilli LOOK UP User manual

LOOK UP
ONE-TOUCH LED VANITY MIRROR
24” x 32”
Vertical Orientation
Lifetime Warranty
For additional patent, FCC and other information, visit bebrilli.com.
BRI-L/IF/MIR24X32/56/D00
Lucidity Lights, Inc. provides this limited warranty to the
original purchaser. For more information about your
warranty, visit bebrilli.com/pages/warranty.

Save these instructions.
READ ALL INSTRUCTIONS BEFORE USING THE MIRROR.
When using an electrical furnishing, basic precautions should always be followed,
including the following:
DANGER – To reduce the risk of electric shock:
1. Always turn off the power source to this furnishing from the circuit breaker before cleaning.
WARNING –Risk of Electric Shock - Connect this furnishing to a properly grounded outlet only.
See Grounding Instructions.
WARNING – To reduce the risk of burns, re, electric shock, or injury to persons:
1. Turn off power source before putting on or taking off parts.
2. Close supervision is necessary when this furnishing is used by, or near children, invalids,
or disabled persons.
3. Use this furnishing only for its intended use as described in these instructions.
Do not use attachments not recommended by the manufacturer.
4. Never operate this furnishing if it has a damaged cord or plug, if it is not working properly,
if it has been dropped or damaged, or dropped into water.
5. Keep the cord away from heated surfaces.
6. Do not use outdoors.
7. To disconnect, turn all controls to the off position, then disassemble wiring.
8. Loading – maximum load 2.2Lbs on glass shelf, maximum load 5.5Lbs on wood shelf.
GROUNDING INSTRUCTIONS – This product must be connected to a grounded metal, permanent
wiring system, or an equipment-grounding conductor must be run with the circuit conductors
and connected to the equipment-grounding terminal or lead on the product.
Not intended to diagnose, treat, cure or prevent any disease or medical condition.
If installing this Vanity Mirror into a new space, professional assistance from an electrician
is highly recommended. Contact Brilli Concierge at [email protected] for assistance.
2 3
CONTENTS
SAFETY INSTRUCTIONS 3
FCC STATEMENT 4
INSTALLATION MANUAL 6
INSTRUCTIONS 8
OUR FEATURES 12
HOW TO USE 14
LIFETIME WARRANTY 16
Important Safety Instructions

This device complies with Part 15 of the FCC Rules and with RSSs of
Industry Canada.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Any changes or modications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment and void the warranty.
This Class B digital apparatus complies with CAN ICES-005 (B) / NMB-005 (B).
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference
4 5
FCC Statement
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.

6 7
Included: Tools Needed (Not Included):
Pair of Gloves
Phillips Screwdriver
Pencil Safety Glasses
3x E-Z Anchors
1x Brilli Vanity Mirror
Level
Installation Manual
1x Bracket
2x 3M Double-Sided
Square Tape
3x Wire Nuts
3x Screws

8 9
1. Prepare the installation location: 2. Mount the bracket:
C. Hold the bracket horizontally where the mirror will be installed and use
the level to ensure the bracket is straight.
D. Once level, mark the 3 mounting holes with a pencil.
A. Remove all of the contents from
the package and ensure that
all materials are enclosed.
B. WARNING: Turn the power OFF at
the power source/circuit breaker
before proceeding.
A. Use a screwdriver to press the tip of
the 3 E-Z anchors into the gypsum
drywall where the mounting holes
are marked.
Instructions
OFFON OFF
B. Thread the screws through the
bracket and align the base of the
screws with the 3 E-Z anchors.
C. Turn the screws with the screwdriver into the E-Z anchors.
Continue tightening until ush.
123
Note: For rst time installation, electrician assistance is recommended.
Note: The Brilli Mirror is 24” x 32” and can only be hung vertically.

10 11
3. Adhere the double-sided tape:
A. Grab the two tape squares and tear
off the paper on one side.
B. Stick the tape squares on the metal
surface of the bottom left and bottom
right corners of the back of the Brilli Mirror.
6. Test your Brilli Mirror:
Instructions
4. Wiring:
A. Pull out reserved wire lines from the junction box in the wall.
B. Connect the wires with the wire nuts (white to white, black to black, yellow/green
to yellow/green).
5. Mount the Brilli Mirror:
A. Remove the paper on the other side of the double-sided tape squares that are
adhered to the bottom left and right corners of the mirror.
B. Hang the mirror on the bracket
xed to the wall.
C. Use the level to make sure the
Brilli Mirror is straight, then
push the mirror against the
wall to afx the adhesive tape
to the wall.
A. Turn ON the main power source/circuit breaker.
B. Tap the power button at the bottom of
the mirror to turn it on.
C. Test the dimming by holding the button.
Now, see yourself in the most positive light!
WHITE WHITE
BLACK BLACK
GREEN/
YELLOW
GREEN/
YELLOW

12 13
Our Features
• 760 Lux for optimal brightness – up to 4x more than
the leading brands
• 5690 Kelvin at CRI 95+ for whiter whites and brighter,
more vivid colors
• One-Touch Sensor Control for on/off, anti-fog and dimming
• Anti-fog keeps your mirror free and clear of condensation –
2x the area of leading brands; automatically activates when
the product is turned on
• Memory feature – recalls last setting when turned on
• No buzz or icker
• Crystal clear low iron glass
• Includes mounting hardware for vertical orientation;
110V hard wired and ready for installation
• Suitable for damp locations

14 15
On/Off Power:
To turn on your Brilli Vanity Mirror, simply tap the outlined power button at the
bottom of the mirror with your nger.
Dimming:
•Once your Brilli Mirror is on, hold the power button until the mirror dims to the
setting you prefer.
•To make your mirror brighter, press and hold the power button again to increase the
light output. Repeat this action to increase or reduce your light levels at any time.
•If the power button is continually held, it will cycle from its lowest brightness to
its highest brightness and continue to do so until the power button is released.
Memory:
Your Brilli Mirror has a memory feature. What does this mean? Your Brilli Mirror
remembers your last setting and returns to that exact level of brightness when
turned back on.
Anti-Fog:
Your Brilli Mirror has an anti-fog feature designed to reduce condensation on the
surface and improve visibility. The anti-fog feature automatically activates when
the product is turned on.
Questions?
Talk to our Brilli Concierge at [email protected].
How to Use