Bristan Hourglass HOU 1HBF C Wiring diagram

2
4
3
1
Pack Contents
Installation Instructions
& User Guide
Specifications Inlet Water Temperature Inlet Connections
Dynamic Water Pressure
Tools You’ll Need
Prior to Installation
Adjustable Spanner Hexagonal Keys
Installation
Please leave these instructions
with the end user
Product Code: HOU 1HBF C (D3)
All products manufactured and supplied by Bristan are safe to use
provided that they are installed, operated and receive regular
maintenance in accordance with these instructions.
This product needs to be installed in accordance with, and meet the
requirements of the Water Supply (Water Fittings) Regulations 1999
and current by-laws. For full Installation Requirements & Notes (IRN)
please visit wras.co.uk/directory.
Isolation valves must be fitted to the inlet water supplies to ensure
ease of future maintenance.
Before installing this product the water supply must be
thoroughly flushed in order to remove any swarf, solder etc.
This product must not be modified in any way as this will
invalidate the guarantee.
Full access must be made available for future
maintenance/servicing purposes.
If in doubt, contact a registered plumber or your Local Water
Authority or the Secretary of the Institute of Plumbing,
address as follows:-
The Institute of Plumbing,
64 Station Lane,
Hornchurch,
Essex,
RM12 6NB, Tel: [phone]
1/2” BSP
Flexible Tails
Screw in the flexible
tails by hand.
DO NOT
OVERTIGHTEN.
Connect the hot
and cold water
supplies.
Your tap is now
ready for use.
65°C
5°C
25°C
Cold Water Supply
Min: 5°C Max: 25°C
Hot Water Supply
65°C Recommended
To replace any spare parts
for your tap, why not
scan the QR Code or
visit www.bristan.com
and search for your product.
Spare Parts
REMEMBER
To fit
isolation valves
for maintenance
purposes
x1
x1
Pressure
BAR
1.0
5.0
4.0
2.0 3.0
0.
Pressure
BAR
1.0
5.0
4.0
2.0 3.0
0.
Maximum Static Pressure: 10.0 bar
Min: 1.0 bar Max: 5.0 bar
Pipe Cutter
Fit the tap to the
basin.
Secure the tap to the basin
by using the fixing kit.
Slight
bend
90 °
angle
Kinks
Curved
round Twists
Flexible Tail Positions
REMEMBER
Hot on the
left, cold on
the right.
5Operation
x1
x1
On
Hot
Cold
IMPORTANT
Turn on water
supply for a few
minutes and check
all joints and
connections for
any leaks.

3
2
1
At Bristan, we want to make things as easy as possible for our customers.
That’s why we oer solid guarantees on all our products, eective from the date of purchase,
to give you peace of mind.
To start your free guarantee simply scan the QR code and register your product.
Alternatively visit www.bristan.com/register to register your product via a computer.
For full guarantee terms and conditions visit www.bristan.com/guarantees.
General Cleaning Troubleshooting
Notes
Symptom Cause Remedy
No flow or
low flow
rate
Partially closed isolation valve. Open isolation valve.
Instantaneous water heater cycles on
and o as flow rate or pressure is too
low.
Increase water flow rate or pressure through system.
Head of water is below the
minimum distance required.
Refer to specification for minimum distance required.
Hot or cold water being drawn o
elsewhere causing pressure changes or
instantaneous boiler temperature
changes.
Do not use other water outlets when using the taps.
Airlock or partial blockage in the supply
pipework.
Flush through pipework to ensure removal of debris
and any airlocks.
Water
dripping
from taps
This is normal for a short time after using
the taps.
This is caused by residual water tension, the build up
of water in the tap body.
If water continues to drip,
possibly due to the ceramic disc valves
Remove valves and clean, refer to 'Maintenance'
section before starting any maintenance.
Taps do not
turn on
Closed isolation valve. Open isolation valve.
Mains water supply turned o. Turn on mains water supply.
Please use this space for any notes you or your installer may have regarding the
installation/plumbing of this product.
Bristan products are made from premium materials, with hand
polishing and electroplated finishes.
Your taps or shower should be regularly cleaned with warm
water, a mild pH-neutral liquid soap, and polished with a soft
cloth. Any residues from soap, toothpaste, shampoos and
shower gels can cause blemishes if not rinsed o straight
after use.
Household bleaches and cleaners contain harsh chemicals and
may damage the surface finish. Avoid using abrasive cloths,
scouring pads, scrub sponges, steel wool
or anything similar.
Some surfaces such as nickel and pewter may be aected by
the dye found in some cloths, so it is also important to avoid
hanging cloths on spouts.
3
2
1
4
Maintenance - Cartridge Cleaning
Loosen the handle grub
screw. Remove handle.
Reverse the
maintenance
steps to replace
the handle.
Place cartridge
in a suitable
solution and
soak until
fully de-scaled.
2.5
mm
Remove the
adaptor and
cartridge.
12
3
Maintenance - Clean/Replace Outlet
Place aerator
parts in a
suitable solution
and soak until
fully de-scaled.
Reverse the maintenance steps
to replace the aerator.
12
3
To replace any spare parts
for your tap, why not
scan the QR Code or
visit www.bristan.com
and search for your product.
Spare Parts
Servicing Your Tap
We recommend servicing your tap at
least once every year to prolong its life.
To see a video showing how to remove
the cartridge for servicing, scan the QR
code with your smart phone or tablet.
Alternatively visit www.youtube.com/BristanTV
IMPORTANT
Isolate the
water supply
before starting!
Unscrew
the aerator.