Briteq BT-GLOWPANEL User manual

ENGLISH OPERATION MANUAL
BRITEQ®1/23 BT-GLOWPANEL
OPERATION MANUAL
Thank you for buying this Briteq®product. To take full advantage of all possibilities and for your own safety,
please read these operating instructions very carefully before you start using this unit.
FEATURES
•The unit is equipped with 36 extremely effective very narrow 4.5° lenses, in combination with powerful and
reliable 3W warm white leds.
•This results in an exceptionally powerful “narrow beam” 6x6 Matrix effect projector that turns even the
biggest concerts and TV shows into an amazing spectacle! Light engineers will be amazed by the endless
possibilities and ease of use to create astonishing light shows!
•A vast internal effects library, containing letters, numbers, chases!
•5 different DMX channel modes for different applications:
•4CH: pixel programs + RGB panel dimming
•7CH: pixel dimming + strobe + programs/letters/numbers + RGB panel dimming
•13CH: pixel dimming + strobe + programs/letters/numbers + speed + RGB panel dimming
•43CH: individual pixel dimming + programs/letters/numbers + individual panel RGB dimming
•48CH: individual pixel dimming + pixel master dimming + strobe + programs + speed + individual
panel RGB dimming
•Excellent built-in programs for wonderful, ever changing, light shows.
•Silent operation, thanks to natural convection.
•The internal shows work in standalone, master/slave or can be selected by DMX: static colors, fading
colors, different static chases, different sound activated chases.
•Backlit alphanumeric 2x 8 character LCD-display for easy menu navigation
•ProCON in/outputs: easy daisy chaining of several units.
•3pin XLR DMX in/outputs
•Rugged metal construction, equipped with “quick lock”mechanisms to build large matrix arrays in no time.
•Optionally a hanging bracket is available for truss mounting of larger arrays (order code: 4426)
•High efficiency and low power consumption!
BEFORE USE
•Before you start using this unit, please check if there’s no transportation damage. Should there be any, do
not use the device and consult your dealer first.
•Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary
for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused
by mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects
or problems caused by disregarding this user manual.
•Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user
manual.
Check the contents:
Check that the carton contains the following items:
•Operating instructions
•BT-GLOWPANEL
•Mains cable

ENGLISH OPERATION MANUAL
BRITEQ®2/23 BT-GLOWPANEL
SAFETY INSTRUCTIONS:
•To protect the environment, please try to recycle the packing material as much as possible.
•To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
•To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when
bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full
performance or may even cause damages.
•This unit is for indoor use only.
•Don’t place metal objects or spill liquid inside the unit. Electric shock or malfunction may result. If a foreign
object enters the unit, immediately disconnect the mains power.
•Locate the fixture in a well ventilated spot, away from any flammable materials and/or liquids. The fixture
must be fixed at least 50cm from surrounding walls.
•Don’t cover any ventilation openings as this may result in overheating.
•Prevent use in dusty environments and clean the unit regularly.
•Keep the unit away from children.
•Inexperienced persons should not operate this device.
•Maximum safe ambient temperature is 40°C. Don’t use this unit at higher ambient temperatures.
•Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging
and servicing.
•Allow the device about 10 minutes to cool down before to start servicing.
•Always unplug the unit when it is not used for a longer time or before to start servicing.
•The electrical installation should be carried out by qualified personal only, according to the regulations for
electrical and mechanical safety in your country.
•Check that the available voltage is not higher than the one stated on the unit.
•The power cord should always be in perfect condition. Switch the unit immediately off when the power cord
is squashed or damaged. It must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
•Never let the power-cord come into contact with other cables!
•This fixture must be earthed in order to comply with safety regulations.
•Don’t connect the unit to any dimmer pack.
•Always use an appropriate and certified safety cable when installing the unit.
•In order to prevent electric shock, do not open the cover. Apart from the mains fuse there are no user
serviceable parts inside.
•Never repair a fuse or bypass the fuse holder. Always replace a damaged fuse with a fuse of the same
type and electrical specifications!
•In the event of serious operating problems, stop using the fixture and contact your dealer immediately.
•The housing and the lenses must be replaced if they are visibly damaged.
•Please use the original packing when the device is to be transported.
•Due to safety reasons it is prohibited to make unauthorized modifications to the unit.
CAUTION: To reduce the risk of electric shock, do not remove
the top cover. No user-serviceable parts inside. Refer servicing
to qualified service personnel only.
The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the
use or the presence of un-insulated “dangerous voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within the equilateral triangle is intended to alert the user to the presence
of important operation and maintenance (servicing) instructions in the literature accompanying
this appliance.
This symbol means: indoor use only
This symbol means: Read instructions
This symbol determines: the minimum distance from lighted objects. The minimum distance
between light-output and the illuminated surface must be more than 1 meters
The device is not suitable for direct mounting on normally flammable surfaces. (suitable only for
mounting on non-combustible surfaces)
CAUTION: Do not stare at operating lamp.
May be harmful to the eyes.

ENGLISH OPERATION MANUAL
BRITEQ®3/23 BT-GLOWPANEL
Important: Never look directly into the light source! Don’t use the effect in the presence of persons suffering
from epilepsy.
DESCRIPTION:
1. [DMX] indicator: red LED lits when DMX signal is present.
2. [MASTER] indicator: yellow LED lits when no DMX signal is present and the fixture is in stand alone
mode or when one or more fixtures are connected as slave(s).
3. [MENU]: used to browse the different options of the setup menu, also the ▲/▼buttons (4 & 5) can be
used to browse the setup menu in both directions.
4. [▲] button:used to browse the setup menu and increase the value of a selected parameter.
5. [▼] button:used to browse the setup menu and decrease the value of a selected parameter

ENGLISH OPERATION MANUAL
BRITEQ®4/23 BT-GLOWPANEL
6. [ENTER] button:used to confirm the selected values of the parameters.
7. [LCD DISPLAY]: backlit 2x 8 character LCD-display for easy navigation. The backlight lights up as soon
as one of the buttons is pressed
8. [SOUND] indicator: green LED flashes on the beat of the music when the fixture is in stand alone mode
and sound is set to ON in the menu.
9. [SLAVE] indicator: red LED lits when the fixture is connected to a Master.
10.[DMX IN]: 3 pin XLR input to daisy chain the fixture with other units or a DMX-controller. The DMX-input
is also used to update the firmware of the fixture.
11.[DMX OUT]: 3 pin XLR output to daisy chain the fixture with other units.
12.[POWER IN]: connect the mains cable or an extension cable here.
13.[POWER OUT] : used to daisy chain the power to several other fixtures. Always pay attention to the
maximum load while adding fixtures! Special combi cables (power + DMX XLR-cables) are available: see
our website!
14.QUICK LOCKS: these "quick lock" mechanisms make it extremely easy and fast to build large matrix
arrays in no time. Also the optional hanging bracket (order code: 4426) can be fixed in no time.
15.MICROPHONE: used to make the fixture work in sound mode to the beat of the music. It’s sensitivity can
be set in the menu [“SOUND SENS”]. (see [SETUP MENU])
16.CARRYING HANDLES: on both sides of the panel there are 2 folding carrying handles for easy
transporting and mounting the fixture.
17.MOUNTING PIN: used for fixing panels in a horizontal setup.
18.MOUNTING HOLE: used for inserting the mounting pin (17) from left or right panels in a horizontal setup.
19.CARRYING HANDLE: on the top of the panel there is a folding carrying handle to easily transport the
fixture or insert/remove it from its flight case.
20.Inner thread M8: for use with eye bolts or clamps with M8 thread
OVERHEAD RIGGING
•Important: The installation must be carried out by qualified service personal only. Improper
installation can result in serious injuries and/or damage to property. Overhead rigging requires
extensive experience! Working load limits should be respected, certified installation materials
should be used, the installed device should be inspected regularly for safety.
•Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging
and servicing.
•Locate the fixture in a well ventilated spot, far away from any flammable materials and/or liquids. The
fixture must be fixed at least 50cm from surrounding walls.
•The device should be installed out of reach of people and outside areas where persons
may walk by or be seated.
•Before rigging make sure that the installation area can hold a minimum point load of
10times the device’s weight.
•Always use a certified safety cable that can hold 12 times the weight of the device when installing the unit.
This secondary safety attachment should be installed in a way that no part of the installation can drop
more than 20cm if the main attachment fails.
•The device should be well fixed; a free-swinging mounting is dangerous and may not be considered!
•Don’t cover any ventilation openings as this may result in overheating.
•The operator has to make sure that the safety-relating and machine-technical installations are approved by
an expert before using them for the first time. The installations should be inspected every year by a skilled
person to be sure that safety is still optimal.

ENGLISH OPERATION MANUAL
BRITEQ®5/23 BT-GLOWPANEL

ENGLISH OPERATION MANUAL
BRITEQ®6/23 BT-GLOWPANEL

ENGLISH OPERATION MANUAL
BRITEQ®7/23 BT-GLOWPANEL
SETUP MENU
With the setup menu you can fully configure the projector. All settings are preserved when the unit is
disconnected from the mains.
Browsing the setup menu:
General instructions for setup.
•Press the [MENU] button to access the setup menu.
•Press the [MENU] button or ▲/▼buttons to browse the different functions of the setup menu until the
required function is shown on the display.
•Press the [ENTER] button to access the function and change its parameters.
•The value to change starts blinking. Use ▲/▼button to change the value.
•Press the [ENTER] button again confirm and select the next parameter to adjust.
[DMX ADDR]
Used to set the desired DMX-address.
•Press the [ENTER] button as soon as the menu option is shown: the values can be changed.
•Use the ▲/▼buttons to select the desired DMX512 address. The last occupied DMX-address is also
shown: makes it easier to set the address of the next unit in the chain.
•Once the correct address shows on the display, press the [ENTER] button to save it.
•Press the [MENU] button for 2 seconds to leave the setup menu.
[CH. MODE]
Used to set the desired channel mode.
•Press the [ENTER] button as soon as the menu option is shown: the values can be changed.
•Use ▲/▼buttons to select the desired mode:
•4CH: pixel programs + RGB panel dimming
•7CH: pixel dimming + strobe + programs/letters/numbers + RGB panel dimming
•13CH: pixel dimming + strobe + programs/letters/numbers + speed + RGB panel dimming
•43CH: individual pixel dimming + programs/letters/numbers + individual panel RGB dimming
•48CH: individual pixel dimming + pixel master dimming + strobe + programs + speed + individual
panel RGB dimming
•Once the correct option shows on the display, press the [ENTER] button to save it.
•Press the [MENU] button for 2 seconds to leave the setup menu.
[SHOW MODE PIX]
Used to set the pixel show mode.
Press the [MENU] or ▲/▼ buttons until “SHOW MODE PIX” is shown on the display.
•Press the [ENTER] button: the last selected show mode will be shown.
•Use ▲/▼buttons to change the show [(Show0, Show1,…Show8)].
•Press the [ENTER] button to confirm the desired show.
•Press the [MENU] button for 2 seconds to leave the setup menu.
[SHOW MODE RGB]
Used to set the RGB panel show mode.
Press the [MENU] or ▲/▼ buttons until “SHOW MODE RGB” is shown on the display.
•Press the [ENTER] button: the last selected show mode will be shown.
•Use ▲/▼buttons to change the show [(Show0, Show1, Show2, Show3, Show 4)].
•Press the [ENTER] button to confirm the desired show.
•Press the [MENU] button for 2 seconds to leave the setup menu.
[MANUAL MODE]
Used to set the projector to a fixed mode (letter or number).
•Press the [MENU] or ▲/▼buttons until [MANUAL MODE] is showing on the display.
•Press the [ENTER] button: [Letter] or [Number] appears.
•Use ▲/▼buttons to select the desired mode: [Letter] or [Number]
•Press the [ENTER] button to confirm the selected mode and change the value.
•Letter : from A to Z
•Number : from 0 to 9

ENGLISH OPERATION MANUAL
BRITEQ®8/23 BT-GLOWPANEL
•Press [ENTER] to confirm the selected value.
•Press [MENU] to leave this mode.
•Press the [MENU] button for 2 seconds to leave the setup menu.
[SOUND MODE]
Used to set the projector to standalone sound mode with different chases playing in endless loops.
•Press the [MENU] or ▲/▼buttons until “SOUND MODE” is shown on the display.
•Press the [ENTER] button: [On] or [Off] will start blinking.
•Press the ▲/▼buttons to select the desired mode:
•[On] : fixture will operate sound activated.
•[Off] : fixture will operate at fixed speed.
•Press the [ENTER] button to select the desired mode.
•Press the [MENU] button for 2 seconds to leave the setup menu.
[SOUND SENS]
Used to set the sensitivity of the internal microphone.
•Press the [MENU] or ▲/▼buttons until [SOUND SENS] is showing on the display.
•Press the [ENTER] button: the value starts blinking and can be changed.
•Use ▲/▼buttons to selected the desired value: 0-100
•Press the [ENTER] button to select the desired value. The selected value stops blinking.
•Press the [MENU] button for 2 seconds to leave the setup menu.
[BLACKOUT PIXELS]
Used to set the pixel mode (ON or OFF) when no DMX signal is present.
•Press the [MENU] or ▲/▼buttons until [BLACKOUT PIXELS] is showing on the display.
•Press the [ENTER] button: [Yes] or [No] will start blinking.
•Use ▲/▼buttons to select the desired mode:
•[Yes] : white pixels will work if no DMX signal is present.
•[No] : white pixels will not work if no DMX signal is present.
•Press the [ENTER] button to select the desired value. The selected value stops blinking.
•Press the [MENU] button for 2 seconds to leave the setup menu.
[BLACKOUT RGB PAN]
Used to set the RGB panel mode (ON or OFF) when no DMX signal is present.
•Press the [MENU] or ▲/▼buttons until [BLACKOUT RGB PAN] is showing on the display.
•Press the [ENTER] button: [Yes] or [No] will start blinking.
•Use ▲/▼buttons to select the desired mode:
•[Yes] : the RGB panels will work if no DMX signal is present.
•[No] : the RGB panels will not work if no DMX signal is present.
•Press the [ENTER] button to select the desired value. The selected value stops blinking.
•Press the [MENU] button for 2 seconds to leave the setup menu.
[BACK LIGHT]
Used to set the back light of the display.
•Press the [MENU] or ▲/▼buttons until [BACK LIGHT] is showing on the display.
•Press the ▲/▼buttons to select the desired mode:
•[On] : the display will stay on.
•[Off] : the display will turn off after some time. (+/- 1 min.)
•Press the [ENTER] button to select the desired mode.
•Press the [MENU] button for 2 seconds to leave the setup menu.
[AUTO TEST]
Used to run a selftest on the fixture.
•Press the [MENU] or ▲/▼buttons until [AUTO TEST] is showing on the display.
•Press the [ENTER] button: [Test…] starts blinking. The fixture runs a continuous test.
•Press the [ENTER] or [MENU] button to stop the test.
•Press the [MENU] button for 2 seconds to leave the setup menu.

ENGLISH OPERATION MANUAL
BRITEQ®9/23 BT-GLOWPANEL
[LOAD DEFAULTS]
This is your emergency exit if you really messed up the settings: just return to factory settings.
•Press the [MENU] button until [LOAD DEFAULTS] is showing on the display.
•Press the [ENTER] button: [Yes] or [No] will start blinking.
•Use ▲/▼buttons to select the desired mode:
•[Yes] : the fixture will load the default (factory) settings.
•[No] : the fixture will keep the customized settings.
•Press the [ENTER] button to select the desired value. The selected value stops blinking.
•Press the [MENU] button for 2 seconds to leave the setup menu.
[FIXTURE TIME]
Shows the number of hours the fixture has worked.
•Press the [MENU] or ▲/▼buttons until [FIXTURE TIME] is showing on the display.
•Press the [ENTER] button to show the number of hours the fixture has been used.
•Press the [MENU] button to stop showing the number of hours.
•Press the [MENU] button for 2 seconds to leave the setup menu.
[FIRMWARE VERSION]
Used to show the current version of the firmware.
•Press the [MENU] or ▲/▼buttons until the [FIRMWARE VERSION] is showing on the display.
•Press the [ENTER] button : shows the installed firmware version.
The firmware of this unit can be upgraded using the Briteq Firmware Updater (order code : 4319) with
Windows® software. More information about this can be found in the user manual of the Firmware Updater
and / or our website: www.briteq-lighting.com
ELECTRICAL INSTALLATION
Important: The electrical installation should be carried out by qualified personal only,
according to the regulations for electrical and mechanical safety in your country.
STANDALONE WITH BUILT-IN CHASES:
Use this function when you want an instant show on only 1 panel.
•Connect the panel to the mains.
•Select one of the following modes in the setup menu:
•SHOW MODE PIX: select this mode to control the show of the white leds. (see setup menu)
•SHOW MODE RGB: select this mode to control the show of the RGB panels. (see setup menu)
•SOUND MODE: select this mode to run the above selected shows to the rhythm of the music (ON) or
with fixed speed (OFF)
STANDALONE MASTER/SLAVE WITH BUILT-IN SHOWS:
Use this function when you want an instant show on 2 or more fixtures.
By linking the units in master/slave connection, the first unit will control the other units to show a
synchronized automatic or sound activated light show.
•Connect the panels as shown in the drawing below
•The first unit will start running its selected show.
•The connected panel (or panels) will be set as SLAVE automatically.

ENGLISH OPERATION MANUAL
BRITEQ®10/23 BT-GLOWPANEL
ELECTRICAL INSTALLATION FOR TWO OR MORE UNITS IN DMX-MODE:
Use this function when you want to control the projectors by any DMX controller.
•Connect the projectors as shown in the drawing below.
•First put the projectors in the desired DMX-mode: see the different DMX-charts and choose the one that
suits you best.
•Give all projectors a start address: each projector shows its start + end address, make sure that the
addresses do not overlap!

ENGLISH OPERATION MANUAL
BRITEQ®11/23 BT-GLOWPANEL
Some general information on DMX:
•The DMX-protocol is a widely used high speed signal to control intelligent light equipment. You need to
“daisy chain” your DMX controller and all the connected units with a balanced cable of good quality.
•Both XLR-3pin and XLR-5pin connectors are used, however XLR-3pin is more popular because these
cables are compatible with balanced audio cables.
•Pin layout XLR-3pin: Pin1 = GND ~ Pin2 = Negative signal (-) ~ Pin3 = Positive
signal (+)
•Pin layout XLR-5pin: Pin1 = GND ~ Pin2 = Negative signal (-) ~ Pin3 = Positive
signal (+) ~ Pins4+5 not used.
•To prevent strange behavior of the light effects, due to interferences, you must use
a 90Ω to 120Ω terminator at the end of the chain. Never use Y-splitter cables, this simply won’t work!
•Make sure that all units are connected to the mains.
•Each light effect in the chain needs to have its proper starting address so it knows which commands
from the controller it has to decode.
DMX CHARTS
4CH Mode :
DMX
Channel
DMX-value
function
remarks
1
000-007
Blackout
008-037
Program 1
038-067
Program 2
068-097
Program 3
098-127
Program 4
128-157
Program 5
158-187
Program 6
188-217
Program 7
218-247
Program 8
248-255
Program 9
2
000-255
Red color dimmer 0-100%
3
000-255
Green color dimmer 0-100%
4
000-255
Blue color dimmer 0-100%
7CH Mode :
DMX
Channel
DMX-value
function
remarks
1
000-007
Blackout
008-067
White Pixels full on
Channel 1 = 068 to 127
2
000-007
Blackout
008-015
Program 1
016-023
Program 2

ENGLISH OPERATION MANUAL
BRITEQ®12/23 BT-GLOWPANEL
024-031
Program 3
032-039
Program 4
040-047
Program 5
048-055
Program 6
056-063
Program 7
064-071
Program 8
072-079
Program 9
080-087
Program 10
088-095
Program 11
096-103
Program 12
104-111
Program 13
112-119
Program 14
120-127
Program 15
128-135
Program 16
136-143
Program 17
144-151
Program 18
152-159
Program 19
160-167
Program 20
168-175
Program 21
176-183
Program 22
184-191
Program 23
192-199
Program 24
200-207
Program 25
208-215
Program 26
216-223
Program 27
224-231
Program 28
232-239
Program 29
240-247
Program 30
248-255
Program 1 - 30 Random
Channel 1 = 128 to 187
2
000-015
Blackout
016-035
Number "0"
036-055
Number "1"
056-075
Number "2"
076-095
Number "3"
096-115
Number "4"
116-135
Number "5"
136-155
Number "6"
156-175
Number "7"
176-195
Number "8"
196-215
Number "9"

ENGLISH OPERATION MANUAL
BRITEQ®13/23 BT-GLOWPANEL
216-235
Count from "0" to "9" (slow->fast)
236-255
Count from "9" to "0" (slow->fast)
Channel 1 = 188 to 247
2
000-021
Blackout
022-030
Letter "A"
031-039
Letter "B"
040-048
Letter "C"
049-057
Letter "D"
058-066
Letter "E"
067-075
Letter "F"
076-084
Letter "G"
085-093
Letter "H"
094-102
Letter "I"
103-111
Letter "J"
112-120
Letter "K"
121-129
Letter "L"
130-138
Letter "M"
139-147
Letter "N"
148-156
Letter "O"
157-165
Letter "P"
166-174
Letter "Q"
175-183
Letter "R"
184-192
Letter "S"
193-201
Letter "T"
202-210
Letter "U"
211-219
Letter "V"
220-228
Letter "W"
229-237
Letter "X"
238-246
Letter "Y"
247-255
Letter "Z"
3
000-255
White Pixel Master Dimmer 0-100%
4
000-007
Blackout
008-131
Strobe (Slow->Fast)
132-139
Full on
140-181
Ramp up effect (slow ↔fast)
182-231
Ramp down effect (slow ↔fast)
232-239
Full on
240-247
Strobe Sound triggered
248-255
Full on
5
000-255
Red color dimmer 0-100%
6
000-255
Green color dimmer 0-100%

ENGLISH OPERATION MANUAL
BRITEQ®14/23 BT-GLOWPANEL
7
000-255
Blue color dimmer 0-100%
13CH Mode :
DMX
Channel
DMX-value
function
remarks
1
000-255
White Pixel 1-6 Dimmer 0-100%
2
000-255
White Pixel 7-12 Dimmer 0-100%
3
000-255
White Pixel 13-18 Dimmer 0-100%
4
000-255
White Pixel 19-24 Dimmer 0-100%
5
000-255
White Pixel 25-30 Dimmer 0-100%
6
000-255
White Pixel 31-36 Dimmer 0-100%
7
000-044
Blackout
045-067
White Pixels full on
068-247
Blackout
248-255
Sound activated show
Channel 7 = 068 to 127
8
000-007
Blackout
008-015
Program 1
016-023
Program 2
024-031
Program 3
032-039
Program 4
040-047
Program 5
048-055
Program 6
056-063
Program 7
064-071
Program 8
072-079
Program 9
080-087
Program 10
088-095
Program 11
096-103
Program 12
104-111
Program 13
112-119
Program 14
120-127
Program 15
128-135
Program 16
136-143
Program 17
144-151
Program 18
152-159
Program 19
160-167
Program 20
168-175
Program 21
176-183
Program 22
184-191
Program 23
192-199
Program 24

ENGLISH OPERATION MANUAL
BRITEQ®15/23 BT-GLOWPANEL
200-207
Program 25
208-215
Program 26
216-223
Program 27
224-231
Program 28
232-239
Program 29
240-247
Program 30
248-255
Program 1 - 30 Random
Channel 7 = 128 to 187
8
000-015
Blackout
016-035
Number "0"
036-055
Number "1"
056-075
Number "2"
076-095
Number "3"
096-115
Number "4"
116-135
Number "5"
136-155
Number "6"
156-175
Number "7"
176-195
Number "8"
196-215
Number "9"
216-235
Count from "0" to "9" (slow->fast)
236-255
Count from "9" to "0" (slow->fast)
Channel 7 = 188 to 247
8
000-021
Blackout
022-030
Letter "A"
031-039
Letter "B"
040-048
Letter "C"
049-057
Letter "D"
058-066
Letter "E"
067-075
Letter "F"
076-084
Letter "G"
085-093
Letter "H"
094-102
Letter "I"
103-111
Letter "J"
112-120
Letter "K"
121-129
Letter "L"
130-138
Letter "M"
139-147
Letter "N"
148-156
Letter "O"
157-165
Letter "P"
166-174
Letter "Q"
175-183
Letter "R"

ENGLISH OPERATION MANUAL
BRITEQ®16/23 BT-GLOWPANEL
184-192
Letter "S"
193-201
Letter "T"
202-210
Letter "U"
211-219
Letter "V"
220-228
Letter "W"
229-237
Letter "X"
238-246
Letter "Y"
247-255
Letter "Z"
9
000-255
White Pixel Master Dimmer 0-100%
10
000-007
Blackout
008-131
Strobe (Slow->Fast)
132-139
Full on
140-181
Ramp up effect (slow ↔fast)
182-231
Ramp down effect (slow ↔fast)
232-239
Full on
240-247
Strobe Sound triggered
248-255
Full on
11
000-255
Red color dimmer 0-100%
12
000-255
Green color dimmer 0-100%
13
000-255
Blue color dimmer 0-100%
43CH Mode :
DMX
Channel
DMX-value
function
remarks
1
000-255
Pixel 1 dimmer 0-100%
2
000-255
Pixel 2 dimmer 0-100%
3
000-255
Pixel 3 dimmer 0-100%
4
000-255
Pixel 4 dimmer 0-100%
5
000-255
Pixel 5 dimmer 0-100%
6
000-255
Pixel 6 dimmer 0-100%
7
000-255
Pixel 7 dimmer 0-100%
8
000-255
Pixel 8 dimmer 0-100%
9
000-255
Pixel 9 dimmer 0-100%
10
000-255
Pixel 10 dimmer 0-100%
11
000-255
Pixel 11 dimmer 0-100%
12
000-255
Pixel 12 dimmer 0-100%
13
000-255
Pixel 13 dimmer 0-100%
14
000-255
Pixel 14 dimmer 0-100%
15
000-255
Pixel 15 dimmer 0-100%
16
000-255
Pixel 16 dimmer 0-100%
17
000-255
Pixel 17 dimmer 0-100%

ENGLISH OPERATION MANUAL
BRITEQ®17/23 BT-GLOWPANEL
18
000-255
Pixel 18 dimmer 0-100%
19
000-255
Pixel 19 dimmer 0-100%
20
000-255
Pixel 20 dimmer 0-100%
21
000-255
Pixel 21 dimmer 0-100%
22
000-255
Pixel 22 dimmer 0-100%
23
000-255
Pixel 23 dimmer 0-100%
24
000-255
Pixel 24 dimmer 0-100%
25
000-255
Pixel 25 dimmer 0-100%
26
000-255
Pixel 26 dimmer 0-100%
27
000-255
Pixel 27 dimmer 0-100%
28
000-255
Pixel 28 dimmer 0-100%
29
000-255
Pixel 29 dimmer 0-100%
30
000-255
Pixel 30 dimmer 0-100%
31
000-255
Pixel 31 dimmer 0-100%
32
000-255
Pixel 32 dimmer 0-100%
33
000-255
Pixel 33 dimmer 0-100%
34
000-255
Pixel 34 dimmer 0-100%
35
000-255
Pixel 35 dimmer 0-100%
36
000-255
Pixel 36 dimmer 0-100%
37
000-007
Blackout
045-067
White Pixels full on
068-247
Blackout
248-255
Sound activated show
Channel 37 = 068 to 127
38
000-007
Blackout
008-015
Program 1
016-023
Program 2
024-031
Program 3
032-039
Program 4
040-047
Program 5
048-055
Program 6
056-063
Program 7
064-071
Program 8
072-079
Program 9
080-087
Program 10
088-095
Program 11
096-103
Program 12
104-111
Program 13
112-119
Program 14
120-127
Program 15
128-135
Program 16

ENGLISH OPERATION MANUAL
BRITEQ®18/23 BT-GLOWPANEL
136-143
Program 17
144-151
Program 18
152-159
Program 19
160-167
Program 20
168-175
Program 21
176-183
Program 22
184-191
Program 23
192-199
Program 24
200-207
Program 25
208-215
Program 26
216-223
Program 27
224-231
Program 28
232-239
Program 29
240-247
Program 30
248-255
Program 1 - 30 Random
Channel 37 = 128 to 187
38
000-015
Blackout
016-035
Number "0"
036-055
Number "1"
056-075
Number "2"
076-095
Number "3"
096-115
Number "4"
116-135
Number "5"
136-155
Number "6"
156-175
Number "7"
176-195
Number "8"
196-215
Number "9"
216-235
Count from "0" to "9" (slow->fast)
236-255
Count from "9" to "0" (slow->fast)
Channel 37 = 188 to 247
38
000-021
Blackout
022-030
Letter "A"
031-039
Letter "B"
040-048
Letter "C"
049-057
Letter "D"
058-066
Letter "E"
067-075
Letter "F"
076-084
Letter "G"
085-093
Letter "H"
094-102
Letter "I"
103-111
Letter "J"