Chauvet DMX-100SQ User manual

Technical Specifications
Power AC 120V 60Hz AC 230-250V 50/60Hz
Fuse 20mm Glass 6.3A Fast
Blow 20mm Glass 5A Fast Blow
Lamps 1 x 24V 250W Part No. ELC3 24V 250W(300hrs)
Dimension 338mm x 320mm x 216 mm / 13.3 x 12.6 x 8.5 in
Weight 9 kg / 19.8 lbs
User Information (Please complete for your records)
DataPurchased: / / SerialNo.:
Dealer Stamp : Model : DMX-100SQ DJ Squeeze
DJ Squeeze
DMX-100SQ
User Guide
Please read these instructions carefully before use
World-wide Headquarters:
3000 North 29th Ct.,
Hollywood, Florida USA 33020
Tel: [phone] Fax: [phone]
www.ChauvetLighting.com

1
E. FIXTURE CLEANING FIXTURECLEANING
The cleaning of internal and external optical lenses and/or mirrors must be carried
out periodically to optimize light output. Cleaning frequency depends on the
environment in which the fixture operates: damp, smoky or particularly dirty
surroundings can cause greater accumulation of dirt on the unit’s optics.
• Clean with a soft cloth using normal glass cleaning products.
• Always dry the parts carefully.
• Clean the external optics at least once every 20 days. Clean the internal optics
at least every 30/60 days.
INDEX
A. GENERAL INSTRUCTIONS
B. MAIN FEATURES
EC Declaration of Conformity
We declare that our products ( lighting equipments ) comply with the following specification and bears
CE mark in accordance with the provision of the Electromagnetic Compatibility ( EMC ) Directive
89/336/EEC.
EN55014-1: 1993, EN61000-3-2: 1995, EN61000-3-3:1995
EN55014-2: 1997 CATEGORY II
EN61000-4-2: 1995, EN61000-4-3: 1995, EN61000-4-4:1995
EN61000-4-5: 1995, EN61000-4-6: 1995, EN61000-4-11: 1994
&
Harmonized Standard
EN60598-1: 1993
Safety of household and similar electrical appliances
Part 1 : General requirements
Following the provisions of the Low Voltage Directive 73/23/EEC and 93/68/EEC.
EC Declaration of Conformity
We declare that our products ( Remote Controller ) comply with the following specification and bears
CE mark in accordance with the provision of the Electromagnetic Compatibility ( EMC ) Directive
89/336/EEC.
EN55015: 1993
EN50082-1: 1997
EN61000-3-2: 1995
EN61000-3-3: 1995
C. LAMP
D. HOW TO CONTROL THE UNIT
-
-----(1) By universal DMX controller
-----(2) Preprogrammed function
-----(3) By easy controller
E. FIXTURE CLEANING

2-
( 2 ) Preprogram functions
The units can be linked together as master/slave in a daisy chain linking as many
units as required and run by the built in preprogrammed chase sequences triggered
by music.
There is no need to set the dipswitches in master/slave mode.
2-light show
Dipswitch 10 “off” means the unit works normally and “on” means inversion. In order
to creating a great light show, you can set dip switch 10 “on” on any unit that is linking
to the master unit to get contrasting movements, even if you have two units only.
Dipswitch 10 on the first unit is no use in the DMX linking, as it is the master unit that
operates the light show.
( 3 ) By easy controller
The easy remote control is used only in master/slave mode. By connecting to the 1/4”
microphone jack of the first unit, you will find that the remote control on the first unit will control
all the other units for Stand by, Strobe/Next and Fast/Slow function.
1. STAND BY - To blackout all the units.
2. FUNCTION - STROBE/NEXT
-Under FAST ( LED off )mode, the units will strobe in three
different ways:
a) Strobe in different gobos and colors.
b) Synchronous strobe.
c) Two-light strobe.
- Under SLOW (LED on ) mode, press FUNCTION button to
choose desired color and gobo.
- MODE - FAST/SLOW
When the LED is off, it is in FAST mode. The unit’s Gobo/Color wheel is sound activated. If
the LED on, it is in SLOW mode, the Gobo/Color wheel is static, controlled by Next button.

3
_
-
DMX512 CONFIGURATION
Channel 1 Channel 2 Channel 3 Channel 4
Shutter Gobos/Colors Rotation Zoom
255 Fastest speed
Gobo Shaking
136 Slowest speed
135 Fastest speed
Strobe
016 Slowest speed
000-015 Stop
255 Fastest speed
Rainbow Effect
128 Slowest speed
120-127 Gobo 14 / Yellow
112-119 Gobo 13 / Red
104-111 Gobo 12 / Four-color
096-103 Gobo 11 / Green
088-095 Gobo 10 / Magenta
080-087 Gobo 9 / Yellow
072-079 Gobo 8 / Cyan
064-071 Gobo 7 / Red
056-063 Gobo 6 / Green + Pink
048-055 Gobo 5 / Magenta
040-047 Gobo 4 / Amber
032-039 Gobo 3 / Blue
024-031 Gobo 2 / Orange
016-023 Gobo 1 / Cyan
008-015 Open
000-007 Blackout
246-255 Stop
245
135
121-134 Stop
120
010
000-009 Stop
255 Fastest speed
Zoom in/out
(continue)
160 Slowest speed
159 Zoom out max.
000 Zoom in min.
•Start the address
How to address your DMX512 system:
1. Select the channels of DMX controller
2. Dipswitches
Dip #1 #2 #3 #4 #5 #6 #7 #8 #9
Value 1 2 4 8 16 32 64 128 256
•Examples:
Channel 01 dip / on: #1=1
Channel 05 dip / on: #1, #3 1+4=5
Channel 09 dip / on: #1, #4 1+8=9
Channel 13 dip / on: #1, #3, #4 1+4+8=13
A. GENERAL INSTRUCTIONS
Please read the enclosed instructions carefully as they include important points about
installation safety, usage and maintenance of the unit.
•Please keep this booklet with the unit for future consultation. If you sell the unit to
another user, be sure that the new user also receives this instruction booklet thus
giving them the necessary information about the use and general warnings of the
unit.
•Before the initial start-up, please unpack and carefully check all components in
case any damage may have occurred during transportation.
•Locate a suitable spot for your device where there is good ventilation. Also, make
sure that no ventilating fans or slots are blocked.
•Protect our environment! Please dispose of the packing boxes properly.
•The electrical work that is necessary for installation must be done by qualified
personnel.
•Always remember to unplug the unit from the main power before any service is
done. Do not open the unit. There are no serviceable parts inside.
•It is very important to ground the yellow/green conductor to earth in order to meet
regulations for safety.
•Check the surrounding area and make sure there are no flammable liquids, water or
metal objects that could enter the fixture. If a foreign object enters the unit,
immediately disconnect the main power. Also, place the fixture in a well-ventilated
room at about 15 cm from the walls.
•Do not touch any wires during operation, as high voltage is hazardous.
•In the event of serious operating problems, stop using the unit immediately. Never
try to repair the unit yourself. Repairs carried out by unqualified personnel can lead
to damage or malfunction. Please contact CHAUVET. Always use genuine spare
parts.

4
_
-
B. MAIN FEATURES MAIN FEATURES
•Voltage: AC 120V 60Hz or 230/240/250V 50/60Hz
•Bulb: ELC3 24V 250W(300hrs)
•The unit is a DMX512 projector. It features full DMX512 control, 14 gobos plus
open and 14 colors plus white, accurate focusable optics system and stepper
motor with blackout feature. Fan cooled.
•It can be operated by DMX512 control or can be used as a stand-alone unit
running via sound activation.
•It can be linked together in master/slave combination, as many as required in 4
channels and run by built-in preprogrammed chase sequences automatically or
by sound activation through an internal microphone to create an intelligent effect.
•Please use a 3 pin XLR cable/plug when connecting them together.
•It features different preprogrammed chase patterns.
•Dimensions: 338mm x 320mm x 216 mm
•Weight: 9 kg / 19.8 lbs
C. LAMP LAMP
ELC3 24V 250W(300hrs)
•Always switch off the mains supply and never handle the lamp or luminaire when it
is hot.
•Do not touch the bulb with bare hands. If this does happen, clean the lamp with
denatured alcohol and wipe with a lint free cloth before installing.
D. HOW TO CONTROL THE UNIT
( 1 ) By universal DMX controller
The DMX512 is widely used in intelligent lighting control, with a maximum of 512
channels.
 A DMX512 system requires a controller, lighting equipment and cable. These are
connected together in a “daisy chain” with the terminator at the end. The cable
cannot be branched or split to a “Y” cable.
 The terminator requires a 90-120 Ohm 1/4 Watt resistor soldered between two
signal cables.
 The DMX512 uses a very high-speed signal. Inadequate or damaged cables, bad
solder joints or corroded connectors can easily distort the signal and shut down
the system. A reliable DMX512 system starts with good quality cables.
 Each lighting unit needs to have an address set to receive the data sent by the
controller. The address number is between 0-511. The end of the DMX512
system should be terminated reducing signal errors.
 3 pin XLR connectors are more popular than 5 pin XLR.
3 pin XLR: Pin 1: GND, Pin 2: Negative signal (-), Pin 3: Positive signal (+)
5 pin XLR: Pin 1: GND, Pin 2: Negative signal (-), Pin 3: Positive signal (+)